 |
Anti-Twist Plate 300-H35
|
Cameras mounted to flash brackets of any brand, including Stroboframe tend to twist or rotate on the camera mounting screw. Cork or rubber friction pads help, but the real solution is to use a camera-specific Anti-Twist (AT) Plate. They act as an interface between the camera and bracket, pin-register to the bracket and conform to the camera's baseplate. This locks the camera to the bracket to prevent twisting. Because there are so many camera configurations, AT Plates are sold separately. Also, because Stroboframe Anti-Twist Plates are interchangeable, your bracket will never become obsolete when you buy different equipment!
|
| CAMERA ANTI TWIST PLATES FOR DIGITAL CAMERAS (Mount between camera and Stroboframe bracket camera platform to prevent camera from twisting.) | |
|
Digital Camera Models |
AT-Plate CAT. NO. |
|
Canon EOS 10D, Canon EOS Digital Rebel, |
300-EOS |
|
Canon EOS 10D w/ Battery Pack |
CORK PAD* |
|
Canon EOS Rebel XT w/ Battery Pack |
CORK PAD* |
|
Canon EOS 1D, Canon EOS Digital Rebel w/ Vertical Grip, Canon EOS 20D w/ Battery Pack, Canon EOS 1D Mark II, |
300-BE1 |
|
Fujifilm FinePix S2 Pro |
300-FS1 |
|
Canon EOS 20D, Canon EOS Rebel XT, |
300-SLR |
| Kodak DCS Pro 14n |
CORK PAD* |
| Kodak Easyshare DX6490 |
CORK PAD* |
| Nikon D1X, D2X |
300-EOS |
| Nikon D70 |
300-NF4 |
| Nikon Coolpix 5700 |
CORK PAD* |
| Olympus E-1 |
CORK PAD* |
| Olympus E-1 w/ Battery Pack |
CORK PAD* |
|
*AT-Plate not applicable: cork pad (supplied with all Stroboframe brackets) provides adequate anti-twist prevention. | |
|
FLASH ANTI-TWIST PLATES | |
|
Flash Models |
AT-Plate CAT. NO. |
|
Nikon SC-17 off-camera cord |
300-C17 |
| Nikon SC-29 off-camera cord |
300-C29 |
| Quantum Q-Flash |
300-QFL |
|
Lumedyne flash heads |
300-LUM |
| CAMERA
ANTI TWIST PLATES FOR FILM CAMERAS (Mount between camera and Stroboframe bracket camera platform to prevent camera from twisting.) | |
|
|
AT-Plate CAT. NO. |
|
35mm SLR CAMERAS (unless otherwise specified) , Nikon Coolpix Cameras, Nikon N80, Nikon N80 w/MB16 Grip |
300-SLR |
|
Bronica ETR |
300-ETR |
|
Bronica ETR with speed grip |
300-ETR |
|
Bronica ETR with motor (on Pro-RL only) |
CORK PAD* |
|
Bronica SQA |
300-SQA |
|
Bronica SQA with speed grip on Pro-SQ |
CORK PAD* |
| Bronica SQA with motor (on Pro-SQ only) |
CORK PAD* |
| Bronica GS1 |
300-GS1 |
| Bronica GS1 with speed grip |
300-ETR |
| Canon EOS-1N, EOS-1, EOS IV and EOS-3, Canon Elan 7 w/ BP 300, EOS 1V-35 |
300-EOS |
| Canon EOS-1 and EOS-1N with BP-E1 or E1, Canon D30 w/BG-ED3, Canon Elan 7, Canon EOS 3 w/ Vertical Grip, Canon 1V-35 w/ Battery Pack |
300-BE1 |
| Canon A2, Nikon F6 |
300-H35 |
| Canon A2, A2E with VG10 vertical grip |
300-VG1 |
| Canon Elan II and Elan IIE with BP-50 |
300-BP5 |
| Canon Elan and Elan II |
300-H35 |
|
Hasselblad |
300-HAS |
|
Mamiya (all except Mamiya 6) |
300-MAM |
|
Minolta 800SI |
CORK PAD* |
|
Minolta Maxxum 9 |
300-H35 |
|
Nikon F5, Nikon F6 w/ MB40 |
300-NF5 |
|
Nikon F4 with MB21 battery pack |
300-NF4 |
|
Nikon F4 with MB20 battery pack |
300-H35 |
|
Nikon N90, N90s, F100, D1X |
300-H35 |
|
Nikon N90s with MB10 or F100 with MB15 |
300-BE1 |
|
Nikon F4 and F4e with MB23 |
300-BE1 |
| Pentax 645 and 645N |
300-PTX |
| Pentax 6x7 (on Pro-T only) |
300-PTX |
|
*AT-Plate not applicable: cork pad (supplied with all Stroboframe brackets) provides adequate anti-twist prevention. | |
2/18/08 Prices subject to change without notice