Ikelite Single Nikonos Sync Cord 4104.6- Nikonos

Single Nikonos Synch Cord #4104.6
Product # 41046

$94.95

Nikonos Camera-to-One TTL Ikelite SubStrobe

TTL cords connect Nikonos cameras to Ikelite strobes.

Delrin style connector with Easy-to-Insert insulator.

TTL is usable with compatible TTL systems only.

Do NOT connect a non-TTL strobe.

When to Use: These are 5-conductor TTL sync cords intended for use only with compatible TTL systems. Examples are: Nikonos IV & V cameras; film cameras in non-Ikelite housings; or D-SLR cameras used with compatible non-Ikelite TTL adapters & housings. For all other uses we recommend the special sync cords described in the above section.

Special Note: If it is necessary to use these sync cords with non-TTL digital camera systems, the camera hot shoe must be modified according to the instructions found here.

Ikelite recommends using only "O" rings from Ikelite on Ikelite connectors for Nikonos; and only "O" rings from Nikonos for connectors from Nikonos. They also recommend using only Ikelite #0184.1 silicone lube on all Ikelite "O" rings to prevent possible softening and swelling in size.

Ikelite Housings | Ikelite Strobes | Ikelite Sync Cords

4/1/08 Prices and specifications subject to change without notice