Housing does not include camera, port
or lens |
6825
Underwater Housing for Fuji S5
Product
# 6825
|
- The heavy duty thick wall dSLR housing is molded of corrosion
free clear polycarbonate, features full capabilities, and operates
safely to 200 feet.
- The housing includes TTL conversion circuitry that provides
four 1/3 f/stop increments over or under flash compensation
that is added to or subtracted from any compensation entered
into the camera, or seven manual power settings in half-stop
increments. All choices are obtained by simply rotating a knob
on the housing back.
- The special TTL conversion circuitry operates perfectly with
current model Ikelite DS digital SubStrobes. See strobe requirements
by serial number.
- Other strobes can be used, but they can not provide TTL.
Mount and sync cords for Nikonos and sync cords for Inon or
Sea & Sea strobes are available.
- The Ikelite Super-Eye magnifier provided with the housing
offers enhanced viewing while wearing a diving mask.
- All ports from Ikelite SLR systems can be utilized, allowing
use of most macro, wide angle, and zoom lenses. This system
allows you to see that the port is sealed.
- Camera Flash Compensation button can be activated by your
index finger while your hand remains on the handle. Control
for front FUNC button is provided; this control can be pulled
up to operate depth of field preview. A control for Lens Release
is also included.
- "Stay depressed" control operates the White Balance,
ISO and Qual functions on top left of camera body, but the
Mode dial under these buttons is not provided. Focus-mode (C/S/M)
selector can be changed with a little finesse.
- AE/AF lock button can be activated with your thumb while
holding the handle. The AF "on" is controlled by
push button, or an optional shaft allows it to be operated
by the thumb rather than the AE/AF lock. The Metering selector
surrounding the AE/AF button is not provided.
- A control is even provided to open the Card slot cover latch,
and the tray is notched, allowing battery and card replacement
without removing the camera from the tray.
- The housing size and weight provides neutral buoyancy and
superb handling underwater. Camera installation is quick and
simple. The dependable controls are conveniently placed at
your fingertips, and kept water tight with Ikelite pioneered
Quad-Ring seal glands proven to be the most reliable method
for sealing controls.
- The housing "O" ring seal is a masterpiece in fail-safe
simplicity compared to designs that require stuffing the "O" ring
into a groove. You can see that the "O" ring is sealed.
- The Release Handles allow easy attachment and removal of
SubStrobe mounting arms at the touch of a button. Two screws
remove the handle and tray assembly for traveling.
|
Ikelite
4/12/07 Prices
and specifications subject to change without notice
|