Housing does not include port, camera or lens |
Sony A-100 Underwater Camera Housing 6841
Product # 6841
Normally ships in two days |
- The heavy duty thick wall dSLR housing is molded of corrosion
free clear polycarbonate, features full capabilities, and operates
safely to 200 feet.
- The housing "O" ring seal is a masterpiece in fail-safe
simplicity compared to designs that require stuffing the "O" ring
into a groove. You can see that the "O" ring is sealed.
- The housing size and weight provides neutral buoyancy and
superb handling underwater. Camera installation is quick and
simple. The dependable controls are conveniently placed at
your fingertips, and kept water tight with Ikelite pioneered
Quad-Ring seal glands proven to be the most reliable method
for sealing controls.
- The Ikelite Super-Eye magnifier provided with the housing
offers enhanced viewing while wearing a diving mask.
- Controls for all camera functions are provided except for
the "Drive" button.
- A "stay depressed" control allows the camera's
flash compensation to be adjusted with one hand. AE lock can
be activated with your thumb while holding the housing's handle.
- The function push-button and dial provide convenient access
to a multitude of camera settings. AF/MF selector, lens release,
and depth-of-field preview are are easily accessible with control
dials.
- The camera tray is notched, allowing media card replacement
without removing the camera from the tray. Placement of the
battery compartment prevents access to the battery while attached
to the tray.
- The proven reliable Ikelite bulkhead allows for fail-safe
connection of external strobes. Right-angle positioning relieves
stress on the sync cord even when the housing is laid on its
back.
- The housing includes TTL conversion circuitry that puts perfect
exposure at your fingertips. The TTL mode provides four 1/3
f/stop increments over or under flash compensation that is
added to or subtracted from any compensation entered into the
camera. Seven manual power settings in half-stop increments
allow for complete creative control. All choices are obtained
by simply rotating a knob on the housing back.
- The special TTL conversion circuitry operates perfectly with
current model Ikelite DS digital SubStrobes. See strobe requirements
by serial number.
- Other strobes can be used, but they can not provide TTL or
be manually controlled through the housing back. Mount and
sync cords for Nikonos and sync cords for Inon or Sea & Sea
strobes are available.
- All ports from Ikelite SLR systems can be utilized, allowing
use of most macro, wide angle, and zoom lenses. This system
allows you to see that the port is sealed.
- The Release Handles allow easy attachment and removal of
SubStrobe mounting arms at the touch of a button. Two screws
remove the handle and tray assembly for traveling.
- Adding the #9571.3 1" (2.5 cm) ball at release handle
allows for attachment of most non-Ikelite arm systems.
|
| |
Ikelite
1/16/07
Prices subject to change without notice
|