SeaLife DC Series Lens Dock
$ 19.95 - Sold Out
SeaLife DC Series Lens Dock
SeaLife SKU: SL972 | Helix SKU: SL972
Overview
Quick Access to your Wide Angle Lens
The SeaLife Lens Dock protects and stores the SeaLife Wide Angle Lens (item SL970). Lens quickly slides in and out of dock for instant access.
Quickly and easily attaches to the trays of the Digital Pro Flash or Photo/Video Light.
Note: Lens Dock will not fit the Mini Wide Angle Lens (SL974) or Fisheye Wide Angle Lens (SL975).
SeaLife Mini Series Wide Angle Lens
$ 49.00 - Sold Out
SeaLife Mini Series Wide Angle Lens
SeaLife SKU: SL974 | Helix SKU: SL974
Overview
When you need to get everything in the shot
Get closer to the subject and still fit everything in the shot with the SeaLife Mini Wide Angle Lens. Compatible with the SeaLife Mini II, Reefmaster Mini, and ECOshot underwater cameras.
Specifications
0.65X conversion lens increases shooting angle by 33%
Easily presses on and off underwater
For sharp close-up shooting distance of 1ft (30cm) to infinity.
Fully-multi coated optical glass
Waterproof to 200 ft/60 m
Includes neoprene lens cover, storage pouch, safety lanyard and cleaning cloth
Super compact lens for the SeaLife Mini II (item SL330), ReefMaster Mini (item SL320, SL332) and ECOshot (item SL321) underwater cameras.
SeaLife Flex-Connect Adapter for Digital Pro Flash
$ 39.00
SeaLife Flex-Connect Adapter for Digital Pro Flash
SeaLife SKU: SL9619 | Helix SKU: SL9619
Overview
Upgrade your Digital Pro Flash
This Flex-Connect Adapter converts the popular Digital Pro Flash (Item SL961) neck to a Flex-Connect mount that can be easily mounted with just a “click” to the Flex-Connect mounting system of grips, trays, arms, and more.
The flash head easily installs to the adapter using the existing mounting bolt on the neck and included hex-wrench. The installation to the Flex-Connect adapter should take no more than 10 minutes and requires no other tools.
|
Easily Expand with Flex-Connect Accessories Quickly and easily expand your lighting with Flex-Connect - add grips, Flex Arms, trays and other accessories with just a "click!" Flex-Connect allows you to transform your camera set from compact to full-featured in just seconds, providing a quick way to adjust to any dive environment. |
SeaLife Flex-Connect Handle
$ 39.00 - Sold Out
SeaLife Flex-Connect Handle
SeaLife SKU: SL998 | Helix SKU: SL998
Overview
For an ergonomic, one-handed operation
Connect the powerful and compact Sea Dragon Lumen light head to the ergonomic Flex-Connect Handle for a handheld dive light.
Sea Dragon lights connect instantly to the handle with just a click, putting the power and coverage of the light in the palm of your hand.
An ergonomic grip for GoPro cameras
Connect the Flex-Connect Adapter for GoPro cameras to the Handle for ergonomic, handheld GoPro camera grip. The Handle features a standard 1/4-20 tripod mount on the bottom, and can be mounted to Flex-Connect Trays, standard tripods, and other accessories.
SeaLife Flex-Connect Adapter for GoPro® Cameras
$ 29.00
SeaLife Flex-Connect Adapter for GoPro® Cameras
SeaLife SKU: SL996 | Helix SKU: SL996
Overview
Mount your GoPro® camera to Flex-Connect accessories
Use this adapter to mount your GoPro camera to the Flex-Connect Cold Shoe Mount, Grip, Trays, or Flex Arm. Ideal for mounting a GoPro camera directly above your DC1400 or other underwater camera using the Flex-Connect Cold Shoe Mount. Includes acorn nut.
Easily expand with Flex-Connect accessories
Quickly and easily expand Sea Dragon lighting with Flex-Connect - add grips, Flex Arms, trays and other accessories with just a "click!" Flex-Connect allows you to transform your camera set from compact to full-featured in just seconds, providing a quick way to adjust to any dive environment.
SeaLife 1-inch Ball Clamp
$ 39.00 - Sold Out
SeaLife 1-inch Ball Clamp
SeaLife SKU: SL9907 | Helix SKU: SL9907
Overview
The Flex-Connect 1-inch Ball Clamp connects two 1-inch diameter balls together. The plates are spring-loaded for easy assembly and breakdown. Its wing-nut handle features an attractive red anodized finish.
- Fits 1-inch (25.4mm) diameter balls
- Aluminum clamp plates and wing nut handle
- Hard coat 2-color anodizing
SeaLife Ball Joint Adapter for Flex-Connect
$ 49.00 - Sold Out
SeaLife Ball Joint Adapter for Flex-Connect
SeaLife SKU: SL999 | Helix SKU: SL999
Overview
The new Ball Joint Adapter for Flex-Connect connects any brand of underwater light that uses a standard 1”/25mm ball joint mounting system to Flex-Connect arms, grips, trays and cold-shoe mount. This heavy duty aluminum piece is built for maximum durability, and like all Flex-Connect accessories, it instantly connects nearly all brands of underwater lights to Flex-Connect with just a “click.”
Easily expand with Flex-Connect accessories
Quickly and easily expand Sea Dragon lighting with Flex-Connect - add grips, Flex Arms, trays and other accessories with just a "click!" Flex-Connect allows you to transform your camera set from compact to full-featured in just seconds, providing a quick way to adjust to any dive environment.
SeaLife Flex-Connect Sea Dragon Ball Joint Adapter
$ 49.00
SeaLife Flex-Connect Sea Dragon Ball Joint Adapter
SeaLife SKU: SL995 | Helix SKU: SL995
Overview
Expand your underwater camera with Sea Dragon Lighting
The Flex-Connect Ball Joint Adapter connects Sea Dragon Lighting to any underwater camera using the 1”/25mm ball joint mounting system. This heavy duty aluminum piece is built for maximum durability, and like all Flex-Connect accessories, it instantly connects Sea Dragon Lighting to a set with just a “click.”
Easily expand with Flex-Connect accessories
Quickly and easily expand Sea Dragon lighting with Flex-Connect - add grips, Flex Arms, trays and other accessories with just a "click!" Flex-Connect allows you to transform your camera set from compact to full-featured in just seconds, providing a quick way to adjust to any dive environment.
SeaLife Y-S Adapter
$ 29.00
SeaLife Y-S Adapter
SeaLife SKU: SL994 | Helix SKU: SL994
Overview
Connect underwater lights and flashes using a Y-S mount
The Flex-Connect Y-S Adapter easily connects any underwater light or flash using a Y-S mount to Flex-Connect grips, trays, arms, cold shoe mount, and other accessories - with no need to worry about compatibility issues. The Y-S Adapter rotates on its base left and right, and has up and down directional control by angling the light on the mount.
Easily expand with Flex-Connect accessories
Quickly and easily expand your underwater camera with Flex-Connect - add grips, Flex Arms, trays and other accessories with just a "click!" Flex-Connect allows you to transform your camera set from compact to full-featured in just seconds, providing a quick way to adjust to any dive environment.
SeaLife Cold Shoe Mount
$ 59.00 - Sold Out
SeaLife Cold Shoe Mount
SeaLife SKU: SL991 | Helix SKU: SL991
Overview
An ultra compact setup
Use the Flex-Connect Cold Shoe Mount to mount a light or flash directly to the cold shoe of your underwater camera for an ultra compact lighting solution.
Combine with the Flex-Connect Adapter for GoPro Cameras to mount a GoPro directly above your underwater camera in order to simultaneously capture underwater photos and video.
Easily expand with Flex-Connect accessories
Quickly and easily expand Sea Dragon lighting with Flex-Connect - add grips, Flex Arms, trays and other accessories with just a "click!" Flex-Connect allows you to transform your camera set from compact to full-featured in just seconds, providing a quick way to adjust to any dive environment.
SeaLife Flex-Connect Grip
$ 39.00
SeaLife Flex-Connect Grip
SeaLife SKU: SL9905P | Helix SKU: SL9905P
Overview
A comfortable grip for your light or camera set
The Flex-Connect Grip provides a comfortable grip and improved handling for your light, flash or underwater camera set.
The rubber-armored grip "clicks" directly into any Flex-Connect tray and accepts all Flex-Connect accessories and Sea Dragon Lights & Flash heads.
|
Expand your camera set with a "click!" Quickly and easily expand your underwater camera set with Flex-Connect - add grips, Flex Arms, trays and other accessories with just a "click!" Flex-Connect allows you to transform your camera set from compact to full-featured in just seconds, providing a quick way to adjust to any dive environment. Disassemble your set with just the push of a button for convenient, lightweight traveling. |
SeaLife Tray Adapter for Ikelite Housings
$ 39.00
SeaLife Tray Adapter for Ikelite Housings
SeaLife SKU: SL997 | Helix SKU: SL997
Overview
|
Connect an Ikelite housing to Flex-Connect Trays Easily connect your Ikelite camera housing to the Flex-Connect Single or Dual Tray. This anodized aluminum mounting plate attaches to Ikelite housings and also features a standard 1/4-20 tripod mount for attaching to Flex-Connect Trays. Includes two 12-24 type* stainless steel mounting bolts and a hex-wrench for quick assembly. |
SeaLife Flex-Connect Dual Tray
$ 59.00
SeaLife Flex-Connect Dual Tray
SeaLife SKU: SL9904 | Helix SKU: SL9904
Overview
Use the Dual Tray to add two lights or flashes, reducing shadowing and increasing stability
Instantly add grips, lights, flashes and Flex Arms to the Dual Tray with just a "click!" and remove them with the push of a button
Mounts to all cameras with a standard 1/4-20 tripod mount
Includes mounting knob
Easily add two lights or flashes to your camera set
Use the Flex-Connect Dual Tray to mount two flashes or lights to your underwater camera for maximum brightness. Double your brightness, reduce shadowing and increase stability. Mounts all cameras with a standard 1/4-20 tripod mount.
SeaLife Flex-Connect Single Tray
$ 39.00
SeaLife Flex-Connect Single Tray
SeaLife SKU: SL9903P | Helix SKU: SL9903P
Overview
Use the Single Tray to add a light or flash to your underwater camera
Instantly add grips, lights, flashes and Flex Arms to the Single Tray with just a "click!" and remove them with the push of a button
Mounts to all cameras with a standard 1/4-20 tripod mount
Includes mounting knob
Expand your underwater camera
Use the Flex-Connect Single Tray to easily expand your underwater camera with an external light or flash. Mount a light directly to the tray, or add a Flex-Connect Grip or Flex Arm for increased control and comfort. Attaches to any underwater camera with a standard 1/4-20 tripod mount. Includes mounting screw.
SeaLife Micro Tray
$ 39.00
SeaLife Micro Tray
SeaLife SKU: SL9902 | Helix SKU: SL9902
Overview
Use the Micro Tray to add light and stability to your ultra compact underwater camera
Instantly add grips, lights, flashes and Flex Arms to the Micro Tray with just a "click!" and remove them with the push of a button
Perfect for ultra compact cameras like GoPro® (requires tripod adapter for GoPro® cameras, Item SL9813)
Mounts to all cameras with a standard 1/4-20 tripod mount
Includes mounting knob
Easily expand your ultra compact camera
Mount a flash or light and add stability to your ultra compact underwater camera. Quickly and easily add grips, lights, flashes and Flex Arms to the Micro Tray with just a "click!" and remove them with the push of a button.
Mounts to all cameras with a standard 1/4-20 tripod mount and includes mounting knob.
Perfect for GoPro® and other compact cameras
Use the Micro Tray to expand your camera while keeping your set up ultra compact. Easily attach a GoPro® camera using the tripod adapter for GoPro® cameras.
SeaLife Flex-Connect Arm
$ 59.00
SeaLife Flex-Connect Arm
SeaLife SKU: SL9901 | Helix SKU: SL9901
Overview
Each Flex Arm adds 7 inches in length and 100 degrees of bending motion
Add up to two arms on each side of your camera set
Easily clicks into place
Direct light where ever you need it
Expand your underwater camera set with one “click!” - The Flex Arm allows for creative lighting, easy aiming, and reduced backscatter by positioning the flash or light farther away from the camera. Each arm has 100° bending motion and adds 7” of length.
The Flex Arm quickly and easily clicks into a Flex-Connect tray, grip, cold shoe adapter or to the top of another Flex Arm. Up to two arms can be added per side. Made of fiber-reinforced polycarbonate material and stainless steel hardware for maximum durability.
|
Expand your camera set with a "click!" Quickly and easily expand your underwater camera set with Flex-Connect - add grips, Flex Arms, trays and other accessories with just a "click!" Flex-Connect allows you to transform your camera set from compact to full-featured in just seconds, providing a quick way to adjust to any dive environment. |
SeaLife Dual Tray Kit
$ 269.00 - Sold Out
SeaLife Dual Tray Kit
SeaLife SKU: SLKIT03 | Helix SKU: SLKIT03
Overview
Includes Flex-Connect Dual Tray, two Grips, two Flex Arms, and two Y-S Adapters
Instantly add grips, lights, flashes and Flex Arms to the Dual Tray with just a "click!" and remove them with the push of a button
Mounts to all cameras with a standard 1/4-20 tripod mount
Includes mounting knob
SeaLife Single Tray Kit
$ 149.00 - Sold Out
SeaLife Single Tray Kit
SeaLife SKU: SLKIT02 | Helix SKU: SLKIT02
Overview
Includes Flex-Connect Single Tray, Grip, Flex Arm, and Y-S Adapter
Instantly add a grip, light, flash or Flex Arm to the Single Tray with just a "click!" and remove it with the push of a button
Mounts to all cameras with a standard 1/4-20 tripod mount
Includes mounting knob
SeaLife Sea Dragon Digital Universal Flash
$ 399.00 - Sold Out
SeaLife Sea Dragon Digital Universal Flash
SeaLife SKU: SL963 | Helix SKU: SL963
Overview
Universal - Works with SeaLife cameras (excluding Micro HD/HD+, Micro 2.0), Olympus, Canon, Sony, Nikon, and other brands of underwater cameras that have a built-in flash
Auto Mode automatically adjusts flash brightness for optimal image exposure
Variable power adjustment allows user to manually fine-tune flash brightness for desired effect and image exposure
Easy to expand with Flex-Connect™ trays, grip and Flex Arms
Effective underwater distance range up to 8 feet (2.5m)
Depth rated to 200 feet/60 meters
Quick-release button to detach flash and aim in crevices and hard to reach areas
Universal mount fits all SeaLife cameras and other brands of underwater cameras with standard tripod mount (Ikelite tripod adapter available but sold seperately)
Auto Learn Mode easily syncs pre-flash with any digital camera
Effective underwater distance range up to 8 feet/2.5 meters
Approximately 150 flashes at full brightness with 4 AA batteries (not included)
Waterproof battery compartment
Includes universal optical cable plug (SL96307) which connects the Sea Dragon Flash optical cable to Olympus, Sea & Sea and other underwater housings using the standard 7mm optical flash port
Coiled optical cable extends from 15”(38cm) to 30”(76cm), compatible when adding one or two Flex Arms
What's In The Box
Sea Dragon Universal Flash head with Flash Diffuser
Flex-Connect Single Tray w/ standard ¼-20 mounting screw
Flex-Connect grip
Optical Cable and Universal Flash Link Adapter
Optical Cable Plug (For Olympus, Sea&Sea and other housings using a 7mm optical cable flash port)
Spare O-rings, O-ring lubricant, O-ring removal tool
Instruction manual
Sea Dragon Case
Specifications
Sea Dragon Flash Specifications
| Guide Number | 66' (20m) full power/ 5' (1.5m) low power, at ISO 100 on land |
| Power Adjustment Range | 8% to 100% (In Auto or Manual Modes) |
| Controls | Power (On/Off), Test (Program), Brightness (Manual/Auto) |
| Coverage/Beam Angle | 80° horizontal x 60° vertical (100° x 100° with included diffuser) |
| Color Temperature | 5700° Kelvin, 5400° Kelvin with diffuser |
| Color Rendering Index | 98 (with or without diffuser) |
| Power Source | 4 AA batteries (NiMH recommended) |
| Battery Life | 150 flashes at full brightness (300 at half brightness) with alkaline or NiMH AA batteries. 250 flashes at full brightness with Energizer Lithium AA. |
| Recycle Time | 1 second at < 1/2 power / 5 seconds at full power |
| Buoyancy | Negative |
| Housing Material | Fiber-reinforced polycarbonate |
| Hardware | Marine grade stainless steel |
| O-ring Material | Dual NBR o-rings (lube included) |
| Weight | 18 ounces (509 grams), head with batteries |
| Dimensions | Head: 5"(12.7cm) x 4.5" (11.4cm) x 2.5" (6.4cm) |
SeaLife Sea Dragon Duo 5000
$ 899.00 - Sold Out
SeaLife Sea Dragon Duo 5000
SeaLife SKU: SL989 | Helix SKU: SL989
Overview
The Sea Dragon Duo 5000 includes Flex-Connect Dual Tray, two Grips, and two powerful Sea Dragon 2500 lumen COB LED lights
Powerful 2500 lumen LED lights using the latest COB LED array technology
One button control for easy operation - one button to power light on/off and select brightness
Three brightness levels: 100%, 50% and 25%
60 minute burn time at full power and constant brightness
Depth rated to 200 feet/60 meters - Guaranteed
Easy to expand with Flex-Connect™ trays, grips and Flex Arms, handle, Y-S, ball joint, cold shoe and other accessories
Quick-release button to detach light and aim in crevices and hard to reach areas
120° wide beam angle on each light evenly illuminates the subject with no hot spots - the combination of two lights is ideal for wide-angle cameras like the Micro HD and GoPro
Corrosion-proof metal light head for heat dispersion and durability
Removable 25W Li-Ion battery w/ charger and international plug adapters included
Waterproof battery compartment - even if the O-ring seal fails, the battery compartment is isolated so water cannot reach the internal electronics
Universal mounting screw fits SeaLife and other brands of underwater cameras w/ standard ¼-20 tripod mount
What's In The Box
Two Sea Dragon 2500 Underwater Photo/Video/Dive Light heads
Flex-Connect Dual Tray w/ standard ¼-20 mounting screw
Two Flex-Connect grips
Two 25Wh Lithium Ion batteries
Two AC Power Adapters, two charging trays, and international plug adapters
Adapter for GoPro cameras with acorn nut
Spare O-rings, O-ring lubricant, O-ring removal tool
Instruction manual
Deluxe travel case
Specifications
Sea Dragon 2500 Photo/Video/Dive Light Specifications
| Body Material | Anodized aluminum light head with fiber-reinforced polycarbonate body |
| Light Source/Bulb Type | 1 x COB LED array (COB - Chip On Board) |
| Brightness | 2500 lumens (maintains 2500 lumens throughout burn time at full power) |
| Effective Range | 4 ft/1.2 m (depends on camera model and visibility) |
| Brightness Levels | Full power (100%), half power (50%), and quarter power (25%) |
| Button Control | Long push (1 sec) to power light on/off; Short push cycles through 100% → 50% → 25% → 100% [repeat cycle] |
| Light Modes | Constant light or hidden emergency signal light (activated by long push of power button) |
| Color Temperature | 5000K |
| Color Rendering Index* | 90 |
| Beam Angle | 120 degrees |
| Battery | Lithium Ion 7.4V, 3400 mAh, 25Wh (included) |
| Battery Charge Time | 170 minutes |
| Run Time | 60 minutes at full power/120 minutes at half power/240 minutes at quarter power |
| Depth | Tested to 200 feet/60 meters |
| Dimensions |
4.8" x 2.2" x 3.8" (12.2cm x 5.6cm x 9.7cm), head only |
| Weight | 13.1 ounces (371 grams), head only |
| Bulb Life | 35,000 hours |
| O-ring | Dual NBR o-rings (lube included) |
| Buoyancy |
Negative |
*CRI is a measure of a light source's ability to show object colors "realistically" or "naturally" compared to daylight, which has a CRI of 100 and represents the maximum value.
The beam angles for the Sea Dragon lights are shown as the true, tested “in-air” (above water) beam angle. Underwater, due to light refraction, the angle tightens to approximately 33% less.
Avoid using this Sea Dragon light above water for prolonged periods of time
The light is designed for underwater use and water is needed to displace heat. The metal light head at full power will reach temperature of about 140F (60C) degrees within a few minutes, which may cause burning if touched. A thermal sensor will automatically dim the light if internal temperatures reaches 150F (65C) degrees. Immediately turn off light if any parts of the light become hot to the touch.
SeaLife Sea Dragon 2500 Photo/Video Light Head
$ 399.00 - Sold Out
SeaLife Sea Dragon 2500 Photo/Video Light Head
SeaLife SKU: SL6712 | Helix SKU: SL6712
Overview
Powerful 2500 lumen LED light using the latest COB LED array technology
One button control for easy operation - one button to power light on/off and select brightness
Three brightness levels: 100%, 50% and 25%
Hidden emergency signal mode: 1 second blink interval and SOS Morse code
60 minute burn time at full power and constant brightness
Depth rated to 200 feet/60 meters
Easy to expand with Flex-Connect™ trays, grips and Flex Arms, handle, Y-S, ball joint, cold shoe and other accessories
Quick-release button to detach light and aim in crevices and hard to reach areas
120° wide beam angle evenly illuminates the subject with no hot spots (90° underwater)
Corrosion-proof metal light head for heat dispersion and durability
Removable 25W Li-Ion battery w/ charger and international plug adapters included
Waterproof battery compartment - even if the O-ring seal fails, the battery compartment is isolated so water cannot reach the internal electronics
What's In The Box
Sea Dragon 2500 Underwater Photo/Video Light head
25Wh Lithium Ion rechargeable battery
AC Power Adapter, charging tray, and international plug adapters
Spare O-rings, O-ring lubricant, O-ring removal tool
Instruction manual
Specifications
Sea Dragon 2500 Photo/Video/Dive Light Specifications
| Body Material | Anodized aluminum light head with fiber-reinforced polycarbonate body |
| Light Source/Bulb Type | 1 x Vero 18 COB LED array (COB - Chip On Board) |
| Brightness | 2500 lumens (maintains 2500 lumens throughout burn time at full power) |
| Effective Range | 4 ft/1.2 m (depends on camera model and visibility) |
| Brightness Levels | Full power (100%), half power (50%), and quarter power (25%) |
| Button Control | Long push (1 sec) to power light on/off; Short push cycles through 100% → 50% → 25% → 100% [repeat cycle] |
| Light Modes | Constant light or hidden emergency signal light (activated by long push of power button) |
| Color Temperature | 5000K |
| Color Rendering Index* | 90 |
| Beam Angle | 120 degrees (90-degrees underwater) |
| Battery | Lithium Ion 7.4V, 3400 mAh, 25Wh (included) |
| Battery Charge Time | 170 minutes |
| Run Time | 60 minutes at full power/120 minutes at half power/240 minutes at quarter power |
| Depth | Tested to 200 feet/60 meters |
| Dimensions |
4.8" x 2.2" x 3.8" (12.2cm x 5.6cm x 9.7cm), head only |
| Weight | 9oz (255g) head without battery ; 12.9oz (365g) head with battery |
| Bulb Life | 35,000 hours |
| O-ring | Dual NBR o-rings (lube included) |
| Buoyancy |
Negative |
*CRI is a measure of a light source's ability to show object colors "realistically" or "naturally" compared to daylight, which has a CRI of 100 and represents the maximum value.
The beam angles for the Sea Dragon lights are shown as the true, tested “in-air” (above water) beam angle. Underwater, due to light refraction, the angle tightens to approximately 33% less.
Avoid using this Sea Dragon light above water for prolonged periods of time
The light is designed for underwater use and water is needed to displace heat. The metal light head at full power will reach temperature of about 140F (60C) degrees within a few minutes, which may cause burning if touched. A thermal sensor will automatically dim the light if internal temperatures reaches 150F (65C) degrees. Immediately turn off light if any parts of the light become hot to the touch.
SeaLife Sea Dragon Duo X2 Flash
$ 799.00 - Sold Out
SeaLife Sea Dragon Duo X2 Flash
SeaLife SKU: SL988 | Helix SKU: SL988
Overview
The Sea Dragon Duo X2 Flash includes Flex-Connect Dual Tray, two Grips, and two Sea Dragon Flashes
Sea Dragon Flash:
Universal - Works with SeaLife cameras (excluding Micro HD/HD+, Micro 2.0), Olympus, Canon, Sony, Nikon, and other brands of underwater cameras that have a built-in flash
Auto Mode automatically adjusts flash brightness for optimal image exposure
Variable power adjustment allows user to manually fine-tune flash brightness for desired effect and image exposure
Easy to expand with Flex-Connect™ trays, grip and Flex Arms
Depth rated to 200 feet/60 meters
Quick-release button to detach flash and aim in crevices and hard to reach areas
Universal mount fits all SeaLife cameras and other brands of underwater cameras with standard tripod mount
Auto Learn Mode easily syncs pre-flash with any digital camera
Effective underwater distance range up to 8 feet/2.5 meters
Approximately 150 flashes with 4 AA batteries (not included)
Waterproof battery compartment
Includes universal optical cable plug (SL96307) which connects the Sea Dragon Flash optical cable to Olympus, Sea & Sea and other underwater housings using the standard 7mm optical flash port
What's In The Box
Two Sea Dragon Digital Underwater Flash heads with Flash Diffusers
Flex-Connect Dual Tray with standard 1/4-20 mounting screw
Two Flex-Connect Grips
Optical Cable and Universal Flash Link Adapters
Two Optical Cable Plugs (For Olympus, Sea&Sea and other housings using a 7mm optical cable flash port)
Spare O-rings, O-ring lubricant, O-ring removal tool
Instruction manual
Travel case
Specifications
Sea Dragon Flash Specifications
| Guide Number | 20m full power/1.5m low power |
| Power Adjustment Range | 8% to 100% (In Auto or Manual Modes) |
| Controls | Power (On/Off), Test (Program), Brightness (Manual/Auto) |
| Coverage Angle | 80° horizontal x 60° vertical (100° with included diffuser) |
| Color Temperature | 5700 degrees Kelvin |
| Power Source | 4 AA batteries (NiMH recommended) |
| Battery Life | 150 flashes |
| Recycle Time | 1 second at < 1/2 power / 5 seconds at full power |
| Buoyancy | Negative |
| Housing Material | Fiber-reinforced polycarbonate |
| Hardware | Marine grade stainless steel |
| O-ring Material | Dual NBR o-rings (lube included) |
| Weight | 18 ounces (509 grams), head with batteries |
| Dimensions | Head: 5"(12.7cm) x 4.5" (11.4cm) x 2.5" (6.4cm) |
SeaLife Sea Dragon Fluoro-Dual Beam
$ 599.00 - Sold Out
SeaLife Sea Dragon Fluoro-Dual Beam
SeaLife SKU: SL673 | Helix SKU: SL673
Overview
Switchable dual beams features six CREE XT-E Royal Blue LED’s (450-460nm) flood beam and one CREE XP-L LED white spot beam
65° fluorescent wide angle beam and 15° white spot beam angles evenly illuminates the subject with no hot spots
One button control for easy operation - one button to power light on/off and select brightness
Four brightness levels: 100% fluoro flood, 50% fluoro flood,100% white spot, and 50% white spot
Hidden emergency signal mode: 1 second blink interval and SOS Morse code
120 minute burn time at full power and constant brightness
Depth rated to 330 feet/100 meters
Easy to expand with Flex-Connect™ trays, grips and Flex Arms, handle, Y-S, ball joint, cold shoe and other accessories
Quick-release button to detach light and aim in crevices and hard to reach areas
Includes integrated dichroic filter and two universal barrier filters for your dive mask and camera for optimal fluoro viewing and photography
Corrosion-proof metal light head for heat dispersion and durability
Removable 25W Li-Ion battery w/ charger and international plug adapters included
Waterproof battery compartment - even if the O-ring seal fails, the battery compartment is isolated so water cannot reach the internal electronics
Universal mounting screw fits SeaLife and other brands of underwater cameras w/ standard ¼-20 tripod mount
|
SeaLife Sea Dragon Fluoro vs. Harmful UV lights For BEST results and SAFETY reasons, the Sea Dragon Fluoro-Dual Beam uses Cree Royal Blue LED's combined with a proprietary dichroic filter. SeaLife NEVER has and never will use Ultraviolet (UV) LED's. Some companies are selling underwater UV lights claiming the results are better than blue LED's, and that there is no need for yellow barrier filter over your mask and/or camera. The truth is that UV lights pose a serious safety hazard to the eyes of humans and sea creatures. UV light is invisible, so you don't realize that your eye is being bombarded with UV rays. It is a proven fact that extended exposure to UV light has been linked to eye damage, including cataracts, macular degeneration, pingueculae, pterygia and photokeratitis that can cause temporary vision loss. The Sea Dragon Fluoro-Dual beam's Blue LED's, combined with our exclusive dichroic filter, emits a powerful blue light creating the optimal wavelength to excite underwater organisms. To see the fluorescence effect best, two yellow barrier filters are included - one for your mask and another for your camera. The primary purpose of the yellow filters are to absorb the visible excess blue light, so you only see is the fluorescence effect. |
What's In The Box
Sea Dragon Fluoro-Dual Beam Photo/Video Light head
Flex-Connect Single Tray w/ standard ¼-20 mounting screw
Flex-Connect grip
Flex-Connect Sea Dragon Ball Joint Adapter
Protective cover for barrier filters
Universal yellow barrier camera filter
Universal yellow barrier mask filter
25Wh Lithium Ion rechargeable battery
AC Power Adapter, charging tray, and international plug adapters
Spare O-rings, O-ring lubricant, O-ring removal tool
Instruction manual
Sea Dragon Case
Specifications
Sea Dragon Fluoro-Dual Beam Photo/Video/Dive Light Specifications
| Body Material | Anodized aluminum light head with fiber-reinforced polycarbonate body |
| Light Source/Bulb Type | Six 5W CREE XT-E Royal Blue LED’s and one CREE XP-L white LED |
| Brightness | 26 watt/m² fluoro flood and 800 lumen white spot (constant brightness) |
| Effective Range | 4 ft/1.2 m (depends on camera model and visibility) |
| Brightness Levels | 100% fluoro flood, 50% fluoro flood, 100% white spot and 50% white spot |
| Button Control | Long push (1 sec) to power light on/off; Short push cycles through 100% → 50% → 25% → 100% [repeat cycle] |
| Light Modes | Constant light or emergency signal light (activated by long push of power button); one second flash or SOS at full power |
| Color Temperature | 5000 ~ 7000K for white spot. Color temp does not apply to blue LED’s |
| Color Rendering Index* | 90 |
| Beam Angle | 65° fluoro flood and 15° white spot |
| Battery | Lithium Ion 7.4V, 3400 mAh, 25Wh (included) |
| Battery Charge Time | 170 minutes |
| Run Time | 120 minutes at full power/240 minutes at half power/480 minutes at quarter power |
| Depth | Tested to 330 feet/100 meters |
| Dimensions |
5.1" x 2.2" x 3.8" (13cm x 5.6xm x 9.7cm) Head only |
| Weight | 15.9oz (450g) head only without battery ; 12.9oz (365g) head with battery |
| Bulb Life | 35,000 hours |
| O-ring | Dual NBR o-rings (lube included) |
| Buoyancy |
Negative |
The Fluoro-Dual beam light is a collaboration with Fire Dive Gear, a leading authority in underwater fluorescence diving. For more information about fluoro diving, specialty courses and custom-made filters, please visit www.firedivegear.com.
The beam angles for the Sea Dragon lights are shown as the true, tested “in-air” (above water) beam angle. Underwater, due to light refraction, the angle tightens to approximately 33% less.
Avoid using this Sea Dragon light above water for prolonged periods of time
The light is designed for underwater use and water is needed to displace heat. The metal light head at full power will reach temperature of about 140F (60C) degrees within a few minutes, which may cause burning if touched. A thermal sensor will automatically dim the light if internal temperatures reaches 150F (65C) degrees. Immediately turn off light if any parts of the light become hot to the touch.
Ikelite Zoom Sleeve for Olympus 7-14mm Lens (DLM Type B)
$ 35.00 - Sold Out
Ikelite Zoom Sleeve for Olympus 7-14mm Lens (DLM Type B)
Ikelite SKU: 5515.09 | Helix SKU: 551509
Overview
A special zoom sleeve designed for use with the DLM 6 inch Dome Port with Zoom. For use with housings using the DLM Type B port mount. See DLM port charts for compatibility.
Ikelite 200DLM/A Underwater Housing for Olympus PEN E-PL8 Mirrorless Micro Four-Thirds Digital Camera
$ 1,049.95
Ikelite 200DLM/A Underwater Housing for Olympus PEN E-PL8 Mirrorless Micro Four-Thirds Digital Camera
ikelite SKU: 6951.08 | Helix SKU: 695108
Overview
This housing requires the addition of a compatible lens port for waterproof operation. Lens port not included.
Superb handling
This powerful compact housing packs in all of our latest upgrades to controls and ergonomics. The shutter lever has been updated to a more sensitive and natural feeling curved design. The standard control hugs the side of the housing for comfortable use when hand holding. It can be easily extended using the optional Shutter Trigger Extension # 4077.93 to put it within easy reach when using a right-hand quick release handle.
Controls are located in the same configuration as on the camera to replicate the muscle memory and familiarity you've developed with your camera on the surface.
Even our push buttons have been redesigned to reduce weight and salt build-up. The video record start/stop button is bright red anodized so that you never miss the action. The back of the housing features laser engraved control symbols which will never fade or fall off.
The camera mount is front-loading for easy installation and removal. A small mounting plate attaches to the bottom of the camera and secures in the front of the housing. The camera mounting plate does not need to be removed from the camera for surface use or when changing the battery or memory cards. The mounting plate features a 1/4-20 threaded mount on the bottom so that it can be attached to a tripod on the surface.
The camera's large, super-bright LCD screen is viewable edge-to-edge through the back of the housing.
True TTL exposure
Light is absorbed as it travels through even short distances underwater, making colors appear dull or monochromatic. To preserve the natural colors of your subject, it's important to stay within arm's reach—no more than 3-4 feet (1m) away.
An integrated TTL circuit is fine-tuned to the Olympus PEN E-PL8 flash exposure protocol for the most accurate exposure possible. The circuit is powered by the strobe for zero maintenance and no batteries to change. Exposure compensation in TTL mode is supported using the camera's built-in control. At this time, only Ikelite DS strobes are capable of powering the circuitry. SEA&SEA, INON, and Nikonos strobes will still enjoy fast recycle times and improved battery life, but must be used in manual exposure modes only.
This housing provides a direct electrical connection to the camera's external flash hot shoe. Cord attachment is as easy as screwing in a light bulb, and the threaded fit prevents accidental detachment during use. The bulkhead connection has been moved to the top of the housing to keep cords out of your way and reduce strain on the cord ends. A variety of sync cord terminations are available for Ikelite, SEA&SEA, INON, or Nikonos strobes for ultimate versatility.
The Olympus PEN E-PL8 camera does not feature a built-in flash. Triggering of fiber optic strobes is not supported at this time. A strobe must be connected by electrical sync cord.
A bright constant-on video light can be used instead of or in addition to a flash. A constant-on light is not as bright as a strobe flash. Constant-on lights do provide added versatility because they can be used for focus assist and for improved colors when shooting video.
Two 1/4-20 threaded mounting points are included on the bottom of the housing for the attachment of a tray and handle system. Handles provide improved ergonomics underwater and are the foundation for your lighting mounts.
There is a simple rule that brighter is better underwater. A high-quality lighting system can produce magazine quality results with almost any camera system.
The Lens Support You Want
It couldn't be more simple to change ports than this system—just press the port on and tighten three thumb screws. Feel positive reinforcement that the port is secure with simple parts you can trust in a remote location.
This housing accepts a variety of ports from our DLM Port System to accommodate all of the most popular zoom, macro, and wide angle lenses. Our custom optical grade acrylic domes components provide the color, clarity, and durability of glass at a fraction of the travel weight and cost.
Lens port sold separately.
Durability and corrosion free performance
Our new white ABS-PC blend housing provides strength and corrosion free performance year with minimal maintenance. The specially formulated color deflects the sun to keep your camera running cooler, longer. Compared to black or clear housings, the light color provides superior contrast for enhanced view of the camera, LCD screen, and o-ring seal.
The unique rear seal design prevents accidental twisting or stretching of the o-ring for simple and confident assembly. We have eliminated the need for an o-ring groove or channel which can trap sand, dirt, or debris. Two double-passivated stainless steel locking lid snaps are simple to use and virtually unbreakable. The clear back allows you to see the o-ring form a solid, watertight seal as it closes.
A spare 1/2-20 threaded accessory port is provided on the side of the housing for easily installation of the optional Vacuum Kit # 47012. A vacuum kit allows you to pressurize the housing to check for proper assembly prior to entering the water.
Ikelite products are designed, built and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit and function. Every unit is water pressure tested to 200 feet (60m). We back our products with over 50 years of experience and the best reputation for service within the dive industry.
This housing is only compatible with the PEN E-PL8 camera.
Strobe Compatibility
Serial number requirements
- AF35: not compatible
- DS50: yes, above serial number 70000
- DS51: yes
- DS125: yes, above serial number 5000
- DS160, DS161: yes
- DS200: yes, above serial number 7163
Electrical sync cord compatibility
- Ikelite-to-Ikelite TTL Sync Cord (TTL) Product 4103.51
- Ikelite-to-Ikelite TTL Dual Sync Cord (TTL) Product 4103.52
- SEA&SEA / INON Strobe-to-Ikelite Non-TTL Sync Cord (Manual) Product 4118.1
- SEA&SEA / INON Strobe-to-Ikelite Non-TTL Dual Sync Cord (Manual) Product 4118.2
- Nikonos SB Strobe-to-Ikelite Non-TTL Sync Cord (Manual) Product 4116.31
- Nikonos SB Strobe-to-Ikelite Non-TTL Sync Cord (Manual) Product 4116.32
Specifications
- 200 ft (60m) depth rating
- DLM Type A port mount
- Controls for all important camera functions; controls are not provided for Fn button or Zoom button
- Ikelite flash bulkhead connector with built-in TTL circuitry
- Two 1/4-20 threaded tray mounts with 3-inch (76mm) spacing
- Slightly negative buoyancy in fresh water
- Actual buoyancy varies depending on choice of lens and port
- 2.9 pounds (1.3 kg)
- 7.5 x 5.9 x 5.2 in (191 x 150 x 132 mm)
- ABS-PC, acrylic, and acetyl construction
What's Included
- Housing
- Housing Rear O-Ring # 0110
- Housing Front O-Ring # 0132.36
- Waterproof bulkhead cap # 9104.5
- Control + Push Button Tip Assortment # 9249.3
- 1/8" Hex Key # 0945.18
- Lubricant # 0184.1
- 1 year manufacturer warranty
Lens port required for waterproof operation. Lens port sold separately.
Ikelite Underwater Housing and Olympus Tough TG-5 Camera Kit
$ 699.00
Ikelite Underwater Housing and Olympus Tough TG-5 Camera Kit
Ikelite SKU: 6233.07 | Helix SKU: 623307
Overview
The TG-5 has a fast 25-100mm mid-range zoom lens with a macro mode that betters almost every other compact out there right now. The TG-5 supports ultra HD 4K video and RAW image capture, which is a powerful tool for post-dive color corrections using either Adobe Lightroom or the included software. The TG-5 is waterproofed to 50' (15.2m) even without a housing, making it the ideal outdoor companion.
This housing is designed for a deeper depth rating and more robust handling than the comparable Olympus brand model. The front of the lens port has a standard 67mm thread for the direct attachment of most popular wide angle and macro wet lenses. A side-mounted shutter lever is more comfortable to use than top mounted styles.
Strobe Compatibility
Due to the position of the camera's flash in relation to its lens, the built-in flash is not suitable to illuminate photos under water. For the best color and clarity, we recommend adding a filter, strobe, or constant-on light. The built-in flash may be used to trigger external strobes via fiber optic sync cord. Two ports are provided for the connection of up to two fiber optic cords.
Any Ikelite DS strobe may be connected using the Fiber Optic Converter # 4401.1 and Fiber Optic Cord # 4501. The AF35 strobe is not compatible with this housing.
Fiber optic cord compatibility
- Ikelite Fiber Optic Coiled Cord # 4501
- INON Optical D Cable "Non-wireless type" L-Connector
- SEA&SEA Fiber Optic Cable (L-type) # 50107
- SEA&SEA Fiber Optic Cable II # 50128
- Olympus UW Fiber Optic Cable PTCB-E02
- Nauticam Optical Fiber Cable # 26211 Nauticam to INON
- Nauticam Optical Fiber Cable # 26212 Nauticam to Sea&Sea
Specifications
- 200 ft (60m) depth rating
- Controls for all camera functions except INFO button
- Slightly positive buoyancy in fresh water
- Central 1/4-20 thread tray mounting
- Weight 1.1 lb (500 g)
- Dimensions 6.2 x 5.5 x 3.6 in (158 x 141 x 85 mm) including projections
- 3.0" diameter glass lens port with 67mm thread
What's Included
- Underwater Housing # 6233.06
- Olympus Stylus TOUGH TG-5 Digital Camera (Red)
- LI-92B Rechargeable Lithium-Ion Battery (3.6V, 1350mAh)
- CB-USB8 Cable (26")
- F-2AC AC Adapter
- Wrist Strap
- Software CD-ROM
- Limited 1-Year Warranty
Ikelite DLM 6 inch Dome Port with Zoom Extended 1.0 Inch
$ 449.95
Ikelite DLM 6 inch Dome Port with Zoom Extended 1.0 Inch
Ikelite SKU: 5516.17 | Helix SKU: 551617
Overview
An extended dome port providing zoom function for most mirrorless interchangeable zoom lenses when used with the appropriate zoom sleeve.
An optical-grade acrylic 6-inch diameter dome allows you to fully take advantage of the angle of view of your lens. Acrylic produces virtually identical image quality to glass yet is much lighter weight and easier to pack.
Our unique zoom sleeves are simple and affordable. Zoom sleeves are particular to the lens for proper operation. Refer to the appropriate port for your housing to determine compatibility.
A dome shade is in process for this item. It is expected to become available in late 2017.
Specifications
- Delrin body with acrylic dome
What's Included
- Dome Port
- Neoprene cover # 0200.1
- Silicone lubricant # 0184.2
Ikelite DLM 6 inch Dome Port with Zoom Extended .375 Inch
$ 424.95
Ikelite DLM 6 inch Dome Port with Zoom Extended .375 Inch
Ikelite SKU: 5516.16 | Helix SKU: 551616
Overview
An extended dome port providing zoom function for most mirrorless interchangeable zoom lenses when used with the appropriate zoom sleeve.
An optical-grade acrylic 6-inch diameter dome allows you to fully take advantage of the angle of view of your lens. Acrylic produces virtually identical image quality to glass yet is much lighter weight and easier to pack.
Our unique zoom sleeves are simple and affordable. Zoom sleeves are particular to the lens for proper operation. Refer to the appropriate port for your housing to determine compatibility.
A dome shade is in process for this item. It is expected to become available in late 2017.
Specifications
- Delrin body with acrylic dome
What's Included
- Dome Port
- Neoprene cover # 0200.1
- Silicone lubricant # 0184.2
Ikelite Focus Gear for Canon EF 100mm IS USM Macro Lens
$ 65.00
Ikelite Focus Gear for Canon EF 100mm IS USM Macro Lens
Ikelite SKU: 5509.71 | Helix SKU: 550971
Overview
For use with DL port systems. Refer to the appropriate lens port chart for complete compatibility information.
What's Included
- Zoom sleeve
Ikelite Flex Strobe Arm For Action Tray
$ 39.95
Ikelite Flex Strobe Arm For Action Tray
Ikelite SKU: 4087.27 | Helix SKU: 408727
Overview
A lightweight and flexible arm for the Action Tray for compact digital housings. The 10" (254mm) long flex arm accepts a DS50 or DS51 strobe. Mounting of larger strobes is not supported. To mount a video light, use product # 4087.26 instead.
This arm can be attached to the top of a Quick Release Handle using the # 9573.31 mount.
Ikelite Zoom Gear for Nikon 16-80mm Lens
$ 35.00 - Sold Out
Ikelite Zoom Gear for Nikon 16-80mm Lens
Ikelite SKU: 5509.16 | Helix SKU: 550916
Overview
For use with DL port systems. Refer to the appropriate lens port chart for complete compatibility information.
What's Included
- Zoom sleeve
Ikelite Nikon D810 Housing 200DL
$ 1,695.00
Ikelite Nikon D810 Housing 200DL
Ikelite SKU: 71009 | Helix SKU: 71009
Overview
A full featured and durable waterproof housing for Nikon D810 DSLR cameras. Suitable for scuba, snorkel, surf, pool, and any application in or around the water.
This housing requires the addition of a compatible DL Lens Port for waterproof operation. Lens Port not included.
Features
This popular model has been completely re-designed from the ground up to include all of our latest improvements.
Lens Ports
The single most important upgrade is our long awaited new Dry Lock (DL) port system. This exciting new system is even more robust and even easier to assembly than our time-tested Four Lock (FL) system. The new ports are lighter and more adaptable, and can accommodate extremely large diameter lenses with ease. If you're considering shooting professional quality lenses like the Nikon 14-24mm or Sigma 10-20mm HSM, then the DL system is essential.
Most popular zoom lenses and select lens focus rings can be engaged using a simple yet effective gearing system that puts adjustment right at your fingertips. A large, soft-touch lobed knob on the side of the housing makes fine tuned adjustments a breeze. Zoom and focus gears differ depending on which lens you are using. All are lightweight and affordable. Refer to the DL System Port Chart to choose the correct gear. Zoom gears sold separately.
Due to differences in mount diameter and zoom engagement, DL and FL system ports cannot be used interchangeably. The DL port mount may be removed and replaced with old style Port Locks for FL Port System (Set of 4) # 5509.04 for legacy users with standard or modular ports from our Four Lock system. This modification will prevent the use of newer DL ports. The housing cannot be converted back and forth repeatedly. Re-installation of the DL port base will require the housing to be returned to Ikelite or an Authorized Dealer and may incur additional service charges. There are significant advantages to upgrading your lens ports which you can read about here. If you're shooting an 8" diameter dome, you'll also save almost 2 pounds by using the DL version instead.
Vacuum System
The included vacuum valve allows you to vacuum test the housing to check for leaks prior to putting your expensive equipment in the water. Combined with a full view of the camera and o-ring seal through the back of the housing, there is no greater assurance that your gear will be safe. Our signature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel. Use of the vacuum valve requires a compatible Vacuum Pump with Gauge # 47011, sold separately.
TTL Exposure
This housings supports your choice of shooting all manual or adding a TTL converter depending on your application. The flash bulkhead has been moved to the top of the case for improved cord routing and reduced strain. Reliable locking connectors between the hotshoe and bulkhead make it easy to install the optional TTL hotshoe or carry back up parts when traveling to remote locations.
You can still enjoy the fastest and most accurate TTL exposure on the market by adding the NT2 Nikon TTL Hotshoe # 46064, Nikon TTL Converter with Ikelite plug # 4301.3, and a compatible Ikelite DS strobe. Exposure compensation can be used added or subtracted in the camera.
Controls and Set-Up
We've upgraded the shutter and AF-ON levers to a more natural feeling curved design. Both controls can optionally be extended using the Shutter Trigger Extension # 4077.93 for more comfortable use when using a right-hand quick release handle. If you're not already using back button focus, we recommend learning this valuable trick.
Our push buttons have been redesigned to reduce weight and salt build-up. The back of the housing features laser engraved control symbols which will never fade or fall off.
The camera mount is now front-loading for easy installation and removal. A small mounting plate attaches to the bottom of the camera and secures in the front of the housing. The camera mounting plate does not need to be removed from the camera for surface use or when changing the battery or memory cards. The mounting plate features a 1/4-20 threaded mount on the bottom so that it can be attached to a tripod on the surface.
Viewfinders
The included Supereye Viewfinder provides an enhanced view of the camera's optical viewfinder when viewed through a dive mask. The viewfinder removes quickly and easily for the attachment of an optional Straight Magnified Viewfinder # 6890 or 45° Magnified Viewfinder (Type 1) # 6891.1.
Handling & Travel
Overall the housing is over 1/2 pound lighter than its former FL counterpart (housing model # 6812.81). Our new hard anodized aluminum base with quick release handle has also been streamlined for travel and is over 3/4 pound lighter than our previous DSLR tray and handle system. The Right-Hand Quick Release Handle # 4077.02 (sold separately) can be added or removed depending on how you want to shoot. The precision machined aluminum base features 1/4-20 tripod mounting sockets and additional mounting locations for future accessories. Plus, the base and handle can be quickly removed when breaking down your system for travel.
A 1/4-20 threaded mounting point is located front and center on the housing above the lens port mount. This mount can be used to attach lightweight accessories like a focus light or GoPro camera.
If you're shooting with two strobe or lighting arms, then a top handle can be added to make the system easier to carry to and from the dive site. Top handles are available in a Cable Grip # 4080.07 or Aluminum Top Handle # 4080.08. The rigid aluminum version provides additional mounting points for lighting and accessories.
Construction
Our new white ABS-PC blend front is stronger than its clear counterpart, provides improved contrast and visibility, and keeps your camera running cooler in the sun.
Like its predecessor and all of our housings, this product is made in the USA, individually inspected for fit, and water pressure tested to 200 feet (60m).
TTL Exposure
Install optional Nikon TTL Hotshoe Product # 46064 and connect the TTL Converter Product # 4301.3 for automatic TTL exposure with compatible Ikelite DS-model Strobes. Ikelite DS-model strobes may be used with this system without the TTL Hotshoe and Converter, but will not provide TTL exposure.
Non-Ikelite Strobes
SEA&SEA, INON, and Nikonos strobes with an electrical connection can be triggered in manual exposure modes using an electrical sync cord. Strobes without an electrical sync cord connection cannot be attached to this system unless slaved off of a hard-wired strobe.
Ikelite Non-Digital Strobes
Older non-digital strobes featuring an ICS-5 electrical sync cord bulkhead can be used with this system in manual exposure modes.
Fiber Optic
Fiber optic only strobes are not compatible with this installation. An external strobe must be connected by electrical sync cord.
Remote Triggering
Strobes with remote slave capabilities may be triggered off of a flash attached to the housing by electrical sync cord. Ikelite DS strobes support remote triggering using the Optical Slave Converter Product number 4403 or the Water Wizard system (manufactured and sold by Aquatica).
Compatibility
This housing is only compatible with the Nikon D810 DSLR as shipped by the manufacturer. Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories.
Differences in lens and control placement prevent other DSLR models from being used in this housing. We are not aware of any other models which may be used in or adapted to this particular housing.
Specifications
200' (60m) depth rating
Compatible with DL system lens ports
Controls are provided for all important camera controls; Controls are not provided for Release mode dial, Release mode dial lock release, Diopter adjustment control, Eyepiece shutter lever, Pv button, Fn button, Focus-mode selector, BKT button, Focus selector lock
1/4-20 thread base mounts with 3.5" spacing
Near neutral buoyancy in fresh water
Actual buoyancy varies depending on choice of lens and port
4.9 lb (2.2 kg)
9.1 x 7 x 6.5" (231 x 178 x 165 mm)
In the Box
Housing
Rear o-ring # 0132.61
Front o-ring # 0132.45
Base with Left-Hand Quick Release Handle # 4077.67
Port Hole Cover # 0200.92
Zoom Gear Retainer # 75900
Tool for Zoom Gear Retainer # 0945.06
Waterproof Bulkhead Cap # 9104.5
1/16" Hex Key # 0945.16
1/8" Hex Key # 0945.18
Control + Push Button Tip Assortment # 9249
Silicone Lubricant 2cc Tube # 0184.2
Ikelite Flex Strobe Arm For Action Tray
$ 39.95 - Sold Out
Ikelite Flex Strobe Arm For Action Tray
Ikelite SKU: 4087.27 | Helix SKU: 408767
Ikelite Flex Light Arm For Action Tray
$ 39.95
Ikelite Flex Light Arm For Action Tray
Ikelite SKU: 4087.26 | Helix SKU: 408726
Overview
A lightweight and flexible arm for the Action Tray II for compact digital housings. The 8.5" (216mm) long flex arm accepts any light mount which is compatible with 1/2" Loc-line flex components, including the 1/2" flex mounts offered by Light & Motion. Mounting of strobes or larger video lights is not recommended. To mount a strobe, use the Flex DS51 Strobe Arm for Action Tray product # 4087.27 instead.
This arm can be attached to the top of a Quick Release Handle using the # 9573.31 mount.
Ikelite Action Tray II Extension for Compact Housings
$ 20.00
Ikelite Action Tray II Extension for Compact Housings
Ikelite SKU: 2605.12 | Helix SKU: 2605.12
Overview
Extend the Action Tray II to make a dual tray. The Action Tray II is required to mount to a housing.
Specifications
- Hard anodized aluminum tray
- 5.6 oz (158g)
What's Included
- Extension
- Mounting hardware
Ikelite Action Tray II for Compact Housings
$ 25.00
Ikelite Action Tray II for Compact Housings
Ikelite SKU: 2605.11 | Helix SKU: 260511
Overview
This super slim and streamlined tray is designed specifically for Ikelite Action and ULTRAcompact digital housings. Compared to our standard Tray with Quick Release Handle, the Action tray is lighter and brings the grip closer to the side of the housing for a more comfortable system.
Included is the necessary hardware to mount to Ikelite housings featuring female mounting points with 3" (76mm) spacing, as well as Action housings with central 1/4-20 mounting. The tray is machined specially to prevent rotation when attached to an Action housing.
Specifications
- Hard anodized aluminum tray
- 8.2 oz (233g)
What's Included
- Action Tray II
- Hardware Set for 1/4-20 Thread Housings # 9523.24
- Hardware Set for 12-24 Thread Housings # 9523.25
Ikelite Action Tray II Extension with DS51 Strobe Arm for ULTRAcompact Housings
$ 55.00
Ikelite Action Tray II Extension with DS51 Strobe Arm for ULTRAcompact Housings
Ikelite SKU: 2605.09 | Helix SKU: 260509
Overview
Add a second strobe to an Action Tray II. The Action Tray II is required to mount to a housing.
Specifications
- Hard anodized aluminum tray
-
6.7 oz (189g)
What's Included
- Action Tray II Extension # 2605.12
- Flex Strobe Arm for Action Tray # 4087.27
Ikelite Action Tray II with DS51 Strobe Arm for ULTRAcompact Housings
$ 65.00
Ikelite Action Tray II with DS51 Strobe Arm for ULTRAcompact Housings
Ikelite SKU: 2605.08 | Helix SKU: 260508
Overview
This super slim and streamlined tray is designed specifically for Ikelite Action and ULTRAcompact digital housings. Compared to our standard Tray with Quick Release Handle, the Action tray is lighter and brings the grip closer to the side of the housing for a more comfortable system.
The flex arm accepts any light mount which is compatible with 1/2" Loc-line flex components, including the 1/2" flex mounts offered by Light & Motion. Mounting of strobes or larger video lights is not recommended. To mount a strobe, use product # 2605.08 instead.
Add the Action Tray II Extension with Light Arm # 2605.07 for a dual handle tray.
Included is the necessary hardware to mount to Ikelite housings featuring female mounting points with 3" (76mm) spacing, as well as Action housings with central 1/4-20 mounting. The tray is machined specially to prevent rotation when attached to an Action housing.
This tray is not suitable for use with our housings for Mirrorless cameras or larger digital housings with stainless steel lidsnaps. Refer to the housing webpage for the correct tray recommendation.
Specifications
- Hard anodized aluminum tray
- 9.3 oz (263g)
What's Included
- Action Tray II # 2605.11
- Flex Strobe Arm for Action Tray # 4087.27
- Hardware Set for 1/4-20 Thread Housings # 9523.24
- Hardware Set for 12-24 Thread Housings # 9523.25
Ikelite Action Tray II Extension with Light Arm for ULTRAcompact Housings
$ 55.00
Ikelite Action Tray II Extension with Light Arm for ULTRAcompact Housings
Ikelite SKU: 2605.07 | Helix SKU: 260507
Overview
Add a light any Action Tray II. The Action Tray II is required to mount to a housing.
Specifications
- Hard anodized aluminum tray
- 5.6 oz (158g)
What's Included
- Action Tray II Extension # 2605.12
- Flex Light Arm for Action Tray # 4087.26
Ikelite Action Tray II with Light Arm for ULTRAcompact Housings
$ 65.00
Ikelite Action Tray II with Light Arm for ULTRAcompact Housings
Ikelite SKU: 2605.06 | Helix SKU: 260506
Overview
This super slim and streamlined tray is designed specifically for Ikelite Action and ULTRAcompact digital housings. Compared to our standard Tray with Quick Release Handle, the Action tray is lighter and brings the grip closer to the side of the housing for a more comfortable system.
The flex arm accepts any light mount which is compatible with 1/2" Loc-line flex components, including the 1/2" flex mounts offered by Light & Motion. Mounting of strobes or larger video lights is not recommended. To mount a strobe, use product # 2605.08 instead.
Add the Action Tray II Extension with Light Arm # 2605.07 for a dual handle tray.
Included is the necessary hardware to mount to Ikelite housings featuring female mounting points with 3" (76mm) spacing, as well as Action housings with central 1/4-20 mounting. The tray is machined specially to prevent rotation when attached to an Action housing.
This tray is not suitable for use with our housings for Mirrorless cameras or larger digital housings with stainless steel lidsnaps. Refer to the housing webpage for the correct tray recommendation.
Specifications
- Hard anodized aluminum tray
- 8.2 oz (233g)
What's Included
- Action Tray II # 2605.11
- Flex Light Arm for Action Tray # 4087.26
- Hardware Set for 1/4-20 Thread Housings # 9523.24
- Hardware Set for 12-24 Thread Housings # 9523.25
Ikelite Action Tray II Extension with Right Handle for Compact Housings
$ 55.00
Ikelite Action Tray II Extension with Right Handle for Compact Housings
Ikelite SKU: 2605.05 | Helix SKU: 260505
Overview
Extend the Action Tray II into a dual handle assembly. The Action Tray II is required to mount to a housing.
Specifications
- Hard anodized aluminum tray
- Aluminum, ABS and rubber handle
- 7.1 oz (200g)
What's Included
- Action Tray II Extension # 2605.12
- Left-Handle Quick Release Handle # 9531.4
Ikelite Action Tray II with Left Handle for Compact Housings
$ 65.00
Ikelite Action Tray II with Left Handle for Compact Housings
Ikelite SKU: 2605.04 | Helix SKU: 260504
Overview
This super slim and streamlined tray is designed specifically for Ikelite Action, ULTRAcompact, and smaller compact digital housings. Compared to our standard Tray with Quick Release Handle, the Action tray is lighter and brings the handle closer to the side of the housing for a more comfortable grip.
The Ikelite Quick Release handle has become a favorite over the years for attachment and release of your lighting arm at the touch of a button. Accept no substitute. Add the Action Tray II Extension with Right Handle # 2605.05 for a dual handle tray.
Included is the necessary hardware to mount to Ikelite housings featuring female mounting points with 3" (76mm) spacing, as well as Action housings with central 1/4-20 mounting. The tray is machined specially to prevent rotation when attached to an Action housing.
This tray is not suitable for use with our housings for Mirrorless cameras or larger digital housings. Refer to the housing webpage for the correct tray recommendation.
Specifications
- Hard anodized aluminum tray
- Aluminum, ABS and rubber handle
- 10.6 oz (299g)
What's Included
- Action Tray II # 2605.11
- Left-Handle Quick Release Handle # 9531.3
- Hardware Set for 1/4-20 Thread Housings # 9523.24
- Hardware Set for 12-24 Thread Housings # 9523.25
Ikelite #9312.28 O-Ring Set for Older Ikelite Housings 8" Diameter - New
$ 9.95
Ikelite #9312.28 O-Ring Set for Older Ikelite Housings 8" Diameter - New
Ikelite #9312.27 O-Ring Set for Older Ikelite Housings 7" Diameter - New
$ 9.95
Ikelite #9312.27 O-Ring Set for Older Ikelite Housings 7" Diameter - New
Ikelite #9312.26 O-Ring Set for Older Ikelite Housings 6" Diameter - New
$ 9.95
Ikelite #9312.26 O-Ring Set for Older Ikelite Housings 6" Diameter - New
Ikelite Type 2 45 degree Magnified Viewfinder
$ 949.95
Ikelite Type 2 45 degree Magnified Viewfinder
Ikelite SKU: 6891.2 | Helix SKU: 68912
