Hi-Glide compensator springs ensure that litelift pantographs hold their desired position. Higher numbered springs support greater weights. Springs can be used individually or in pairs. Which Springs to use: The type of spring you will need to combine with the Litelift pantograph will depend on the weight of the equipment you need to support. Use this table to ensure you have the correct spring combination to safely support your equipment. Weight (kg) - Spring Combination. 1.8 - 2.7kg - 1 of Type 2 2.7 - 3.6kg - 2 of Type 1 3.6 - 5.4kg - 1 of Type 1 & 1 of Type 2 5.4 - 7.3kg - 2 of Type 2 7.3 - 8.2kg - 1 of Type 3 & 1 of Type 2 8.2 - 9.0kg - 1 of Type 3 & 1 of Type 4 9.0 - 10.0kg - 2 of Type 4 18.0 - 20.0kg - 4 of Type 4 You can use up to four springs on each Litelift pantograph. Example: If the lighting equipment you are attaching to the Litelift weighs 15.4kg. You would need to use two 'Type 4' springs (9.0-10.0kg) and two 'Type 2' springs (5.4-7.3kg).
Speedotron 10' Heavy Duty Air Cushioned Lightstand with 5/8" Mounting Stud, 4 Sections with 3 Risers, 4.5 lbs., 35" folded.
Meet the youngest sibling in the Speedo family--the Speedotron 1005 Power Supply (120VAC). This rugged, dust-proof power pack can be dialed down from 1000 w/s to 44 w/s (22 w/s using two heads) in 1/4 f-stop stages to make subtle lighting changes quickly. Up to 4 flash heads can operate symmetrically or asymmetrically, giving you plenty of choices on location or in the studio. Low voltage trigger connection makes the 1005 safe for digital cameras. With a top recycling speed of 1.75 seconds at full power, the 1005 makes a great choice for corporate portraits, interiors, and much more. This kit is supplied for use with 120VAC.