Base Plate System w/ Dovetail:
The Core's base plate system has a quick release plate with a 1/4"-20 thread screw, and it is adjustable both vertically and laterally. The base plate mount is designed to work in part with a dovetail plate which allows for fine tuning the balance of weight when mounted on support. The dove tail plate has four 1/4"-20 female thread-ins and three 3/8"-16 female thread-ins on its underside.
Matte Box Pro:
The Matte Box Pro is a height adjustable, swing-away matte box. The swing-away feature of the matte box allows for quick access to your camera's lens; no need to slide your matte box off the rails to swap out a lens. The matte box is also height adjustable allowing you to accommodate cameras of varying lens height. The matte box also has two rotatable filter trays, and comes with 8 lens donuts to insure proper shading on your filters.
Hand Grips and Top Handle:
The Core's hand grips, top handle, and shoulder pad can snap-on to any 15mm rod system. The hand grips are adjustable in two locations allowing for comfortable positioning. The top handle can be adjusted in height, and the handle can be unscrewed and threaded on the opposite side. The hand grips feature four 1/4"-20 female thread-ins and the top handle features twenty-two 1/4"-20 female thread-ins. The thread-ins on the the hand grips allow for optimal placement of an on board monitor for the camera operator, and the thread-ins on the top handle allow for excellent placement of an on board monitor for a 1st AC.
V-mount Battery System:
The v-mount battery system features three (3) varying DC2.5 output jacks. The output voltages are DC5V, DC7.4V, and DC12V. The battery system also features a female USB interface for powering USB devices. The bottom of the battery system, including the standard 15mm rail mount, is tooled out of aircraft aluminum. The top portion of the battery system is made out of an impact resistant plastic.
Follow Focus A1:
The Follow Focus Advanced 1 features snap-on rail mounts, a reversible gear box, and the position of the drive gear can be adjusted laterally. With a reversible gear box, the FFA1 can be adjusted to accommodate both short and long lenses. Also, its drive gear can be detached and replaced with larger diameter gears.
-Rugged Aluminum Alloy Build
-Height Adjustable Base Plate System w/ Dovetail Plate
-2-Stage, Height Adjustable, Swing-away Matte Box
-V-mount Battery Plate w/ HDMI Splitter
-Snap-on Follow Focus w/ Reversible Drive Gear
-Snap-on Hand Grips, Top Handle, and Shoulder Pad
-Carbon Fiber Rods
(1) x Base Plate System w/ Dovetail Plate
(1) x Matte Box Pro ( Height-Adjustment)
(1) x V-mount Battery Plate w/ HDMI Splitter
(1) x Follow Focus Advanced I
(1) x Snap-on Hand Grips
(1) x Snap-on Top Handle
(1) x Snap-on Shoulder Pad
(2) x 61cm - 15mm Carbon Fiber Rods
Speedotron 10' Heavy Duty Air Cushioned Lightstand with 5/8" Mounting Stud, 4 Sections with 3 Risers, 4.5 lbs., 35" folded.
Meet the youngest sibling in the Speedo family--the Speedotron 1005 Power Supply (120VAC). This rugged, dust-proof power pack can be dialed down from 1000 w/s to 44 w/s (22 w/s using two heads) in 1/4 f-stop stages to make subtle lighting changes quickly. Up to 4 flash heads can operate symmetrically or asymmetrically, giving you plenty of choices on location or in the studio. Low voltage trigger connection makes the 1005 safe for digital cameras. With a top recycling speed of 1.75 seconds at full power, the 1005 makes a great choice for corporate portraits, interiors, and much more. This kit is supplied for use with 120VAC.