Wind-up stands have been the definition of strength and safety in the grip industry since their inception. They enable a single operator to raise and lower heavy loads safely with just the turn of a handle. As you crank the handle both risers move simultaneously. A single clockwise revolution of the handle raises the stand 1.73 (4.4 cm), and a single counter-clockwise revolution will lower the stand by the same amount. The KS401212 has an automatic self-locking mechanism that prevents the light stand from dropping unexpectedly making the operation safer. The risers have a series of perforations that are engaged by a safety pin. With the auto-lock engaged, the safety pin automatically locks into each successive perforation as you raise the stand. Once the auto-lock is disengaged, an internal spring retracts the safety pin allowing you to lower the stand. The crank handle folds back for travel. It also is designed as a safety measure and can be folded back and placed between two of the tripod's legs. The reason for this is to catch the handle and prevent it from turning, stopping the risers from quickly falling if the lock is unexpectedly disengaged. The tension between the brake shoe and risers is user adjustable, simply with an Allen wrench. The KS401212 also features a leveling leg that enables the user to extend one leg more than the others to level out the stand on an incline or uneven terrain. The KS401212 comes equipped with a skid-proof foot-step located on the main section of its base to allow the user to stand upon it to reach the top risers and head to make adjustments if necessary.
Speedotron 10' Heavy Duty Air Cushioned Lightstand with 5/8" Mounting Stud, 4 Sections with 3 Risers, 4.5 lbs., 35" folded.
Meet the youngest sibling in the Speedo family--the Speedotron 1005 Power Supply (120VAC). This rugged, dust-proof power pack can be dialed down from 1000 w/s to 44 w/s (22 w/s using two heads) in 1/4 f-stop stages to make subtle lighting changes quickly. Up to 4 flash heads can operate symmetrically or asymmetrically, giving you plenty of choices on location or in the studio. Low voltage trigger connection makes the 1005 safe for digital cameras. With a top recycling speed of 1.75 seconds at full power, the 1005 makes a great choice for corporate portraits, interiors, and much more. This kit is supplied for use with 120VAC.