R-3 II Digital LED Video Light # 323081 - NEW
$ 46.95
R-3 II Digital LED Video Light # 323081 - NEW
The R-3 II features three (3), daylight-balanced Power LEDs that deliver up to 500 lx of illumination, and the unit is dimmable from 20-100%. This light also features a unique barn door system. The barn door system is composed of two (2) barn doors that act as flags to shape your light and of two (2) swing-away filters, one (1) tungsten filter and one (1) diffusion filter. Whether shooting indoors or in tight quarters, the R-3 II offers solutions for adjusting the quality of your light as needed. This light has a standard cold shoe mount that has an integrated 1/4"-20 female thread. The addition of the 1/4"-20 female thread allows for the attachment of mounting accessories such as a Baby Pin, Spigot, or Hand Grip. This R-3 II model comes with a Sony NP-F battery plate. The R-3 II comes in two battery plate options: Sony NP-F and Panasonic D28S.
R-3 LED Video Light - Sony 118111030101
$ 69.95
R-3 LED Video Light - Sony 118111030101
The R-3 features three (3), daylight-balanced Power LEDs that deliver up to 500 lx of illumination, and the unit is dimmable from 20-100%.
This light also features a unique barn door system. The barn door system is composed of two (2) barn doors that act as flags to shape your light and two (2) swing-away filters, one (1) tungsten filter and one (1) diffusion filter. Whether shooting indoors or in tight quarters, the R-3 offers solutions for adjusting the quality of your light as needed.
This R-3 model comes with a Sony NP-F battery plate. This light has a standard cold shoe mount that has an integrated 1/4"-20 female thread. The addition of the 1/4"-20 female thread allows for the attachment of mounting accessories such as a Baby Pin, Spigot, or Hand Grip.
Bulb: Power LEDLight Angle: 80 degrees
Illuminance: 500 lx
Power Variation: 20-100%
Color Rending Index (Ra): 80%
Correlated Color Temperature (CCT): 5600K (3200K w/ Tungsten Filter)
Power Source: Built-in Sony NP-F Battery Pate
Operating Voltage: 5.8-8.4V DC
Lasting Time: 100 minutes with Sony NP-F550
Shoe Type: Standard Cold Shoe w/ integrated 1/4"-20 female thread
Nominal Weight: 11 oz / 325 g (without battery)
Nominal Dimensions: 12.3 x 10 x 7.3 (cm)
Package Contents:
(1) x R-3 Video Light (S)
(1) x Barn Door System
(1) x Operation Manual
(1) x Warranty Card
R-4 Digital LED Video Light (Sony Battery Plate) # ISMND
$ 46.95
R-4 Digital LED Video Light (Sony Battery Plate) # ISMND
R4 is a flicker free and heat-free LED light, which produce 700 lux light,light intensity can be adjusted by the dimmer switch at the back (adjusting without flicker).The R4 produces a 5600K very clean and natural color light.If you need to lower the color temperature, just simply attach Orange Warming filter to the front of the light.You can make the light soft with the White Diffusion filter.
Specification:
Bulb: POWER LED
Illumination Angle: 60 degrees
Watt loss:12w
Luminous: 700Lux
Power Variation: 25-100%
Color Rendering Index(Ri):≥80
Operating Voltage: 5.8V-16.8V
Correlated Colour Temperature(CCT): 5600K/3200K
Battery: F970 battery(not included)
Weight: 325g without battery
Dimensions: 127mm(W) x 72mm(H) x 105mm(D)
Package Contents:
1 x R4 Video Light
1 x Barn Doors Bracket
1 x Diffuser
1 x Color Filter
1 x Manual
R-4 LED Video Light - Panasonic
$ 79.95
R-4 LED Video Light - Panasonic
Description:
This professional LED light features 126 super bright LEDs with an effective light throw of up to 35 feet. The LED light is dimmable so you can adjust the amount of light you need for each project or setting. The base can be tilted so you can aim the light up or down. You can use many type of Sony NP-F, NP-FH series and Panasonic CGR series batteries to power this LED light. Or you can use 6 AA batteries. This light will run for approximately 2.5 hours on a set of AA batteries. The unit is very light weighting only 8.5 oz without batteries. It has a built in battery meter so you will know how much power it has left. There is a power on-off/dimmable switch to adjust the amount light you need. The unit runs very cool and is safe to touch. Mount on any standard size hot shoe. Come with 3 diffusers. Great for shooting wedding ceremony, reception and many other important events.
Features:
- 126 super bright LED's
- LED video light can be tilted up or down
- Built-in Battery Meter
- On-off switch and fully dimmable
- Shoe-mount compatible with all Pro & Consumer video camcorders and DSLR cameras
- Dimensions 4.75" x 6.50" x 2" including shoe mount
(LED Area is 4.75" x 3.75" x 2") - Effective distance - up to 35 feet
- Approx 685+ Lux at 1 Meter
- Approx. 2.5 hours running time on AA Batteries
- Uses standard AA Batteries or Sony & Panasonic batteries that are listed below - Batteries are NOT Included
R-4 LED Video Light - Sony
$ 79.95
R-4 LED Video Light - Sony
The R-4 features four (4), daylight-balanced Power LEDs that deliver up to 700 lx of illumination. This unit is dimmable from 20-100%.
This light also features a unique barn door system. The barn door system is composed of two (2) barn doors that act as flags to shape your light and of two (2) swing-away filters, one (1) tungsten filter and one (1) diffusion filter. Whether shooting indoors, outdoors, or in tight quarters, the R-4 offers solutions for adjusting the quality of your light as needed.
This light has a standard cold shoe mount that has an integrated 1/4"-20 female thread. The addition of the 1/4"-20 female thread allows for the attachment of mounting accessories such as a Baby Pin, Spigot, or Hand Grip.
The R-4 comes with a built-in Sony NP-F battery plate.
Specifications:
- Bulb: Power LED
- Light Beam Angle: 60 degrees
- Illuminance: 700 lx
- Power Variation: Stepless 20-100%
- Color Rending Index (Ra): 80%
- Correlated Color Temperature (CCT): 5600K (3200K w/ Tungsten Filter)
- Power Sources: Sony NP-F Battery
- Operating Voltage: 5.8-8.4V
- Battery Life: 70mins with Sony NP-F550
- Mounting: Standard Cold Shoe w/ integrated 1/4"-20 female thread
- Nominal Weight: 14 oz / 397 g (w/ barn door system)
- Nominal Dimensions: 12.3 x 12 x 6.2 (cm)
Package Contents:
(1) x R-50 LED Light Panel(1) x 1/4;-20" Male Thread to Cold Shoe Adapter
(1) x Swinging Tungsten Filter
(1) x Swinging Diffusion Filter
(1) x Wide-angle Diffuser
(1) x Operation Manual
(1) x Warranty Card
R-50 LED Video Light
$ 69.95
R-50 LED Video Light
The R-50 LED Light Panel features fifty (50), daylight balanced Power LEDs that deliver up to 500 lx of illumination. This light is dimmable from 0-100% and can be powered by either AA batteries or by an external power source through its DC 2.5 jack.
This light features two swing away filters: one (1) tungsten filter and one (1) diffusion filter. The light comes standard with an 1/4"-20 Male Thread to Cold Shoe Adapter which attaches to the R-50 1/4;"-20 female thread-in.
Specifications:
- Bulb: Power LED
- LED Count: 50
- Light Beam Angle: 60 degrees
- Illuminance: 500 lx
- Power Variation: 0-100%
- Color Rending Index (Ra): 85%
- Correlated Color Temperature (CCT): 5600K (3200K w/ Tungsten Filter)
- Power Sources: AA Batteries / DC 2.5 jack
- Operating Voltage: 5-15V
- Battery Type: 4x AA Battery (Not Included)
- Battery Life: 80mins with AA Battery
- Mounting: 1/4;"-20 Female Thread-in; Packaged with 1/4"-20 Male Thread to Cold Shoe Adapter
- Nominal Weight: 6 oz / 192 g
- Nominal Dimensions: 10.5 x 8.8 x 5.6 (cm)
Package Contents:
(1) x R-50 LED Light Panel(1) x 1/4";-20 Male Thread to Cold Shoe Adapter
(1) x Swinging Tungsten Filter
(1) x Swinging Diffusion Filter
(1) x Wide-angle Diffuser
(1) x Operation Manual
(1) x Warranty Card
Ranger Quadra Hybrid Lead Standard Set A
$ 1,819.99 - Sold Out
Ranger Quadra Hybrid Lead Standard Set A
Ray Flash Universal Long (Most Full Size DSLR Bodies)
$ 139.95
Ray Flash Universal Long (Most Full Size DSLR Bodies)
Ray Flash Universal Short (Most Compact DSLR Bodies)
$ 139.95
Ray Flash Universal Short (Most Compact DSLR Bodies)
RE)S-V (401228) RS2 6.5' LIGHT STD
$ 39.95
RE)S-V (401228) RS2 6.5' LIGHT STD
ReefMaster RM-4K Camera
$ 349.00 - Sold Out
SeaLife ReefMaster RM-4K Underwater Camera and Housing
- Depth up to 130f
- Compact design for portability and storage
- Powered by a removable lithium-ion rechargeable battery
- Wi-Fi sharing to easily preview, download and share to a smartphone or tablet
- Expand memory with a Micro SDHC memory card up to 120GB
- 2.0” LCD screen to review images and video
- Waterproof housing covers inner camera with Moisture Muncher to avoid fogging
ReefMaster RM-4K Camera
Adjustable wrist strap (SL50102)
Lens Cap (SL50113)
USB cable adapter (SL50103)
USB cable (3ft /90 cm) (SL51004)
Wall Charger w/ US plug(110-240V, 50/60 Hz) (SL50105)
Int’l wall Charger adapters (EU, UK, AU) (SL50106)
Camera pouch (SL50107)
Remote Switch 60-T3 , 2'
$ 5.00
Electromagnetic cable release. Operates AF & metering separately from shutter release, also features Running Lock.
For the T70, T90, EOS 650, 620, 750, 850, 630, 1, RT, A2, A2e, 1N & 1N-RS Cameras 1V, 1V-HS & EOS 3 Cameras Require Adapters
Retaining Ring 59mm x 0.5mm Thread - Jam Nut / Retainer
$ 0.00 - Sold Out
Retaining Ring 59mm x 0.5mm Thread - Jam Nut / Retainer
Retrospective 20 -Black
$ 174.75
Created for the professional photographer that wants to blend in with the crowd and remain inconspicuous in any situation. This bag combines the look and feel of "old-school" camera bags with "new-school" features and technology for the digital imaging age. KEY FEATURES Minimalist outer appearance conceals expensive photo equipment Carries a gripped DSLR with zoom lens attached Taller size to fit a 70-200mm f/2.8 lens attached to camera Black (1100D 'polyspun' polyester exterior fabric), Pinestone (sand washed cotton canvas) and Blue State (sand washed cotton canvas) GEAR PROFILE 1 gripped DSLR with up to a 70-200mm f/2.8 lens attached, plus 1-3 additional lenses 1 gripped DLSR (body only) in front pocket and 2-4 lenses in main compartment, including a 70-200mm f/2.8 1 standard body attached to a 70-200mm f/2.8 alongside a 300mm f/2.8 lens unattached TECHNICAL SPECIFICATIONS Interior Dimensions: 12" W x 11.75" H x 6" D (30.5 x 29.8 x 15.2 cm)* *Bag softness and flexibility allows expansion to carry a pro size DSLR with lens attached, facing down Exterior Dimensions: 13" W x 12.5" H x 7" D (33 x 31.7 x 17.8 cm) Weight: 3.2 lbs (1.5 kg) MATERIALS Exterior: For superior water-resistance, all exterior fabric has a durable water-repellent (DWR) coating, plus the underside of the fabric has a polyurethane coating. It's also constructed with 1100D polyspun polyester, antique nickel-plated metal hardware, YKK® RC Fuse (abrasion resistant) zippers, nylon webbing, 3-ply bonded nylon thread. Interior: Removable closed cell foam inserts with reinforced PE board, 210D silver-toned nylon, polyurethane-backed Velex, 2x polyurethane-coated nylon 210T seam-sealed rain cover, 3-ply bonded nylon thread.
Right Angle Baby Plate
$ 24.95 - Sold Out
This wall plate contains a 5/8" baby stud bent at a 90 degree angle, with eight mounting holes for screws or nails.
RODE 3.5mm TRRS to TRRS patch 1.6m cable
$ 30.00 - Sold Out
RODE 3.5mm TRRS to TRRS patch 1.6m cable
Rode SKU: SC9 | Helix SKU: RMSC9
Overview
The SC9 is a high-quality 1.5m TRRS to TRRS cable for easy and reliable connection of smartphones to the RØDECaster Pro.
Specifications:
Connector-1 1 x 1/8" / 3.5 mm TRRS Male Straight
Connector-2 1 x 1/8" / 3.5 mm TRRS Male Straight
Cable Length 4.92' / 1.5 m
RODE 3/8" Pivoting Boom Adaptor
$ 30.00 - Sold Out
RODE 3/8" Pivoting Boom Adaptor
The RØDE Pivot Adaptor is a durable machined-aluminium, brass and high-grade polymer adaptor for mounting on boom stands and boompoles, allowing for up to 210 degrees of pivot. A 5/8" to 3/8" adaptor is included.
| Weight | 92.00gm |
| Dimensions | 70.00mmH x 45.00mmW x 33.00mmD |
| Warranty | 1 year |
RODE Blimp with Rycote Lyre Suspension System
$ 299.00 - Sold Out
RODE Blimp with Rycote Lyre Suspension System
- Greatly reduces handling and wind noise
- Accommodates most shotgun microphones 325mm in length and 19-22mm diameter
- Rycote Lyre suspension system onboard with internal spacing guide
- Lightweight skeleton handle with 3/8” thread mount
- Mogami cable with Neutrik and Switchcraft XLR connectors
- Dead Wombat windshield included
- 10 year warranty (no registration required)
The RØDE Blimp is a complete windshield and shock mounting accessory for the NTG1, NTG2, NTG3, NTG4 and NTG4+ microphones, as well as any third party shotgun microphone up to 325mm (12 ¾”) in length. Now featuring the Rycote® Lyre suspension system, the Blimp provides the ultimate in microphone suspension and isolation. Constructed from a single piece of hard-wearing thermoplastic, the Lyre provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap. The Blimp’s handle has also been completely redesigned, reducing the product weight significantly, while increasing the ergonomics for handheld use. Housed inside the grip is a heavy-duty Mogami cable which splits via a junction box to a highly-flexible thin cable inside the Blimp, to minimise the transference of vibration to the microphone. With the lightweight design of the handle and suspension system the new Blimp design is over 25% lighter (550gm without microphone or DeadWombat fitted). The Blimp attaches to any standard boompole via 3/8" thread attachment at the base. The Universal Blimp Mount is available as an option to remove the handle when the Blimp is being used primarily on a boompole to reduce weight. The Dead Wombat windshield, caring brush and tail/patch cable are included. The added confidence of a full ten year warranty* ensures that the Blimp is by far the best microphone windshield system available, further evidenced by a 2009 Red Dot Award and Australian International Design Award for outstanding product design. *Excludes normal wear and tear of Dead Wombat furry cover or any misuse, modification or improper storage and transportation of the product.
| Weight | 550gm |
| Dimensions | 285.00mmH x 490.00mmW x 125.00mmD |
| Warranty | 10 year warranty |
RODE Boompole Bag for Boompole, Shotgun Mic, Softie and Shock Mount
$ 39.95 - Sold Out
Designed to carry the Boompole with attached mic and shock mount.
| Weight | 575.00gm |
| Dimensions | 960.00mmH x 200.00mmW x 20.00mmD |
| Warranty | 1 year |
RODE Boompole Cips (Pack of 5)
$ 12.99 - Sold Out
The RØDE Boompole Clips are designed to quickly and easily mount onto any RØDE boompole to secure the microphone lead and minimise any movement. Pack of 5.
Rode Boompole Microphone Boom Arm
$ 149.00 - Sold Out
View larger
Rode Boompole Microphone Boom Arm
Designed for the professional, the Rode Boompole is a high grade professional boom pole for location recording. The boom pole allows you to mount your microphone securely and swivel it in a range of directions that will allow you to easily change positions and follow your sound source. Machine from high grade aluminium.
Features
- Lightweight aluminium construction
- New ultra smooth extension and retraction system
- Easy to use locking mechanism
- Precision balanced
- Extends from 33 inches to 10 feet
- Compatible with NTG1, NTG2, NTG3, NT4, NT5, NT55 and M3 microphones
RODE Boompole Pro, Carbon Fiber Boom Pole (10')
$ 149.00 - Sold Out
Rode Boompole Pro, Carbon Fiber Boom Pole (10')
Made from carbon fibre, the RØDE Boompole Pro weighs only 535gm (18oz) and, from a compact 810mm (2‘ 8”), extends to a full 3m (10’). Designed for use with professional shotgun microphones such as the RØDE NTG3 as well as the Blimp windshield system, the Boompole Pro joins RØDE’s popular boom pole range which now consists of five models ranging in size, weight, and construction material. Each of the five pole sections is comprised completely from carbon fibre making it incredible lightweight while maintaining high levels of strength. The sections are easily extendable with one hand thanks to an intuitive twist-lock mechanic. RØDE offers boom pole cable clips as an optional accessory, however the company’s new RØDELink wireless XLR adaptor allows users to record audio from a shotgun microphone on the end of the Boompole Pro without the hassle and possible handling noise of cables.
| Weight | 535gm |
| Dimensions | 810mmH x 40mmW x 40mmD |
| Warranty | 1 year |
RODE Broadcaster Condenser Microphone
$ 419.00 - Sold Out
RODE Broadcaster Condenser Microphone
Rode SKU: Broadcaster | Helix SKU: RMBroadcaster
Overview
Precision 1" broadcast cardioid end-address condenser microphone. Features unique 'on air' indicator.
The RØDE Broadcaster is a large diaphragm, end-address condenser microphone designed to provide the ultimate performance for broadcast vocal applications.
Its rich, full quality tailored response has an emphasised proximity effect that has made it a standard in radio stations the world over. It is equally suitable as a voice-over microphone for film and television
The Broadcaster features an internal pop filter, designed to minimise plosives sounds that can overload the microphone capsule and distort the audio output. In addition to the Broadcaster's native 20Hz-20kHz response, a selectable high-pass filter at 75Hz is available which will prevent low-end noise such as air conditioners and traffic from being recorded.
The Broadcaster features an innovative 'On-Air' indicator on the body that can be wired for external activation by the 'Channel On/Mute' function on many consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power.
The RØDE Broadcaster microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
Specifications
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter with bipolar output buffer |
| Capsule | 1.00" |
| Polar Pattern |  |
| Address Type | End |
| Frequency Range | 20Hz - 20kHz |
| Output Impedance | 40Ω |
| Maximum SPL | 128dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 2.0mV |
| Sensitivity | -34.0dB re 1 Volt/Pascal (20.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 14dB-A |
| Power Options |
+24V phantom power required from mixer or interface
|
| Weight | 577.00gm |
| Dimensions | 167.00mmH x 50.00mmW x 65.00mmD |
| Output |  |
| Warranty | 1 year with free extension to 10 years following registration |
RODE CLIP1 MiCon Cable Management Clip (Pack of 3)
$ 19.95 - Sold Out
The CLIP1 is a cable management clip, designed to allow optimal mounting of MiCon cables on the microphone user. Supplied in a pack of three.
RODE Custom Pin-Head Replacement Unpainted Mesh Head for the PinMic (Silver)
$ 10.99 - Sold Out
The RØDE Custom Pin-Head is a replacement unpainted mesh head for the PinMic microphone, that can be customised to provide enhanced camouflage. Please note that the microphone capsule is sold separately.
1 Year Warranty
RODE DC to USB Power Cable
$ 20.00
RODE DC to USB Power Cable
Rode SKU: DC-USB1 | Helix SKU: RMDCUSB1
Overview
The DC-USB1 is a handy power adaptor for powering the RØDECaster Pro from any compatible USB output, making the console completely portable. A high-power (2.4A minimum) USB output is required for operation. Power bank is not included.
- Power Adapter for RODECaster Pro
- Use RODECaster Pro with 2.4mA USB Power
- Makes RODECaster Pro Portable
Specifications:
| Power Requirements | USB: 5 V, 2.4 mA DC: 12 V / 1 A |
RODE DDCGO DeadCat Go Artificial Fur Wind Shield
$ 29.95 - Sold Out
RODE DDCGO DeadCat Go Artificial Fur Wind Shield
The DeadCat GO is a furry wind cover for the VideoMic GO, designed for use in windy environments. Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent.
RODE Dead Kitten Windscreen
$ 24.99 - Sold Out
Designed for minimising any wind noise when using the microphone in high wind conditions. Suits SVM, SVMP, NT4, iXY
RODE DeadCat VMP Wind Muff for VideoMic Pro
$ 39.00 - Sold Out
RODE DeadCat VMP Wind Muff for VideoMic Pro
The DeadCat VMP is a furry wind cover for the VideoMic Pro, designed for use in windy environments. Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent. The DeadCat VMP is compatible with the VideoMic Pro rubber-band models only (pre May 2015). For VideoMic Pro models with Rycote Lyre onboard please see DeadCat VMPR.
| Weight | 13.00gm |
| Dimensions | 150.00mmH x 95.00mmW x 30.00mmD |
| Warranty | 1 year |
RODE DeadCat VMPR
$ 39.00
RODE DeadCat VMPR
The DeadCat VMPR is a furry wind cover for the VideoMic Pro, designed for use in windy environments. Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent. The DeadCat VMPR is compatible with the VideoMic Pro featuring Rycote Lyre shockmounting (after May 2015). For VideoMic Pro models with band suspension please see DeadCat VMP.
Weight
13gm
Dimensions
150.00mmH x 95.00mmW x 30.00mmD
Compatible Microphones
•
VideoMic Pro
RODE DeadMouse-Pin - Wind Shield
$ 24.99
The DeadMouse-Pin is a professional grade windshield, designed to minimise wind noise to ensure quality recordings in adverse environments with the RØDE PinMic.
RODE DeadWombat Artificial Fur Wind Shield for Blimp
$ 49.95
The DeadWombat windshield is designed for minimising wind noise when recording in high wind conditions using the RØDE Blimp.
Rode Directional Microphone for iPhone and iPad VideoMic Me
$ 59.00 - Sold Out
Rode Directional Microphone for iPhone and iPad VideoMic Me
The VideoMic Me is a compact and lightweight, high-quality directional microphone with that connects directly to the iPhone TRRS microphone/headphone socket. Its flexible mounting bracket accommodates a wide range of smartphones and allows the microphone to be fitted for primary camera or front camera ('selfie') use. A 3.5mm headphone jack on the rear allows for play-through of audio while recording (app dependent) as well as easy playback of your videos without having to remove the microphone. The VideoMic Me includes a deluxe furry windshield for shooting outdoors or in adverse weather.
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter |
| Capsule | 0.50" |
| Polar Pattern | |
| Address Type | End |
| Frequency Range | 100Hz - 20kHz |
| Maximum SPL | 140dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Sensitivity | -33.0dB re 1 Volt/Pascal (22.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 20dB-A |
| Power Options | |
| Weight | 34gm |
| Dimensions | 38mmH x 21mmW x 80mmD |
| Output |  |
| Warranty | 1 year with free extension to 2 years following registration |
RODE DS-1 Microphone Desk Stand
$ 29.99 - Sold Out
The DS1 is a weighted table top microphone stand.
RODE GN1 Flexible Gooseneck for NT-6 Microphone
$ 19.95 - Sold Out
Miniature (85mm) flexible goose neck for NT6. By using the GN1 with NT6 microphone stand you get an added height that allows you to have total control over the placement of the NT6.
RODE Grip+ for iPhone 5c - Multi-Purpose Mount & Lens Kit
$ 79.00 - Sold Out
Multi-purpose mount and lens kit for iPhone 5C
The RØDEGrip+ is a multi-purpose mounting solution with high-quality lens kit for the Apple iPhone 5, iPhone 5s, iPhone 5c, iPhone 4 and iPhone 4S. Featuring a camera-shoe mount with a 3/8" thread in the base that can be mounted in three different positions, the RØDEGrip can be used in a number of orientations and setups. These include:
- Handheld pistol grip filming with the iPhone
- Handheld audio recording with the i-XY stereo microphone
- Boom stand mounted audio recording with the i-XY
- Camera-mounted audio recording with the i-XY
- Desktop mounted for handsfree iPhone display and filming
- Camera-mounted iPhone display for photography apps
| Weight | 90.00gm |
| Dimensions | 110.00mmH x 50.00mmW x 40.00mmD |
| Warranty | 1 year |
RODE Grip+ Multipurpose Mount and Lens Kit for the iPhone 5/5s
$ 79.00 - Sold Out
Multi-purpose mount and lens kit for iPhone 5 & iPhone 5S
RODE HS1-B Headset Microphone (Black)
$ 299.00 - Sold Out
Ultra lightweight and ergonomic omnidirectional headset microphone (black).
- Ultra discreet appearance
- Available in Pink or Black
- Omni-directional polar pattern
- Three axes of mechanical adjustment for perfect fit with malleable tube arm and headband for finer adjustment
- Lightweight construction for complete comfort
- Corrosion resistant stainless steel tube arm
- Low handling noise
- Includes Mini-furry and pop filter / windshield
- RØDE MiCon interconnectivity system provides interface with a wide range of wireless systems
- Five year extended warranty when you register your microphone
The RØDE HS1 is a discreet and lightweight headset microphone that provides clean, clear and pronounced audio for any application where the microphone needs to be in close proximity to presenter's mouth.
Subtle, ergonomic design including three axes of mechanical adjustment, a malleable, ultra lightweight tube arm and headband, and the choice of either black (HS1-B) or pink (HS1-P) models ensure the perfect fit and function for each individual.
The HS1's light weight, comfortable fit, low self-noise, minimal appearance and user friendly omni-directional polar pattern make it an ideal microphone for film, television, video, theatre, house of worship and live vocal performance.
The headset is connected via a 1.2m (4') shielded, detachable Kevlar® reinforced cable that has been rigorously strain tested up to 10kg to ensure reliable performance. Integrated cable management on the retainer body and an additional cable management clip minimises visibility, while providing maximum mobility for the wearer.
The included mini-furry for high wind protection ensures quality recordings in adverse environments, and the supplied anti-trauma water resistant case provides rugged and secure protection for the microphone, cable, clips and included accessories and tools.
Knowing that versatility is paramount in any product, RØDE has developed the MiCon™ connector system which provides seamless integration between the HS1 headset microphone and a wide range of wireless systems as well as consoles, cameras and portable recorders.
The RØDE HS1 headset is designed and made in Australia, and is covered by RØDE Microphones' innovative 5 year 'no questions asked' warranty which provides 12 months of complete cover, and an optional US$99 replacement microphone during the extended warranty period.
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter |
| Capsule | 0.10" |
| Polar Pattern |  |
| Address Type | End |
| Frequency Range | 60Hz - 18kHz |
| Output Impedance | 3000Ω |
| Maximum SPL | 122dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 189.0mV |
| Sensitivity | -47.2dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 36dB-A |
| Power Options | |
| Weight | 6.50gm |
| Dimensions | 65.00mmH x 180.00mmW x 200.00mmD |
| Output |  |
| Warranty | 1 year with free extension to 5 years following registration here |
IN THE BOX:
RODE HS1-P Headset Microphone (Pink)
$ 299.00 - Sold Out
Ultra lightweight and ergonomic omnidirectional headset microphone (pink).
- Ultra discreet appearance
- Available in Pink or Black
- Omni-directional polar pattern
- Three axes of mechanical adjustment for perfect fit with malleable tube arm and headband for finer adjustment
- Lightweight construction for complete comfort
- Corrosion resistant stainless steel tube arm
- Low handling noise
- Includes Mini-furry and pop filter / windshield
- RØDE MiCon interconnectivity system provides interface with a wide range of wireless systems
- Five year extended warranty when you register your microphone
The RØDE HS1 is a discreet and lightweight headset microphone that provides clean, clear and pronounced audio for any application where the microphone needs to be in close proximity to presenter's mouth.
Subtle, ergonomic design including three axes of mechanical adjustment, a malleable, ultra lightweight tube arm and headband, and the choice of either black (HS1-B) or pink (HS1-P) models ensure the perfect fit and function for each individual.
The HS1's light weight, comfortable fit, low self-noise, minimal appearance and user friendly omni-directional polar pattern make it an ideal microphone for film, television, video, theatre, house of worship and live vocal performance.
The headset is connected via a 1.2m (4') shielded, detachable Kevlar® reinforced cable that has been rigorously strain tested up to 10kg to ensure reliable performance. Integrated cable management on the retainer body and an additional cable management clip minimises visibility, while providing maximum mobility for the wearer.
The included mini-furry for high wind protection ensures quality recordings in adverse environments, and the supplied anti-trauma water resistant case provides rugged and secure protection for the microphone, cable, clips and included accessories and tools.
Knowing that versatility is paramount in any product, RØDE has developed the MiCon™ connector system which provides seamless integration between the HS1 headset microphone and a wide range of wireless systems as well as consoles, cameras and portable recorders.
The RØDE HS1 headset is designed and made in Australia, and is covered by RØDE Microphones' innovative 5 year 'no questions asked' warranty which provides 12 months of complete cover, and an optional US$99 replacement microphone during the extended warranty period.
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter |
| Capsule | 0.10" |
| Polar Pattern | |
| Address Type | End |
| Frequency Range | 60Hz - 18kHz |
| Output Impedance | 3000Ω |
| Maximum SPL | 122dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 189.0mV |
| Sensitivity | -47.2dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 36dB-A |
| Power Options | |
| Weight | 6.50gm |
| Dimensions | 65.00mmH x 180.00mmW x 200.00mmD |
| Output | |
| Warranty | 1 year with free extension to 5 years following registration here |
IN THE BOX:
RODE iClamp iPhone 4/4S Mount for iXY Mic
$ 14.99 - Sold Out
Heavy-duty clamp to provide additional support for iXY and iPhone 4/4S
The RØDE iClamp is a heavy-duty clamp designed to provide additional support for your i-XY stereo microphone (30-pin version) during high movement usage with an iPhone 4 or iPhone 4S. Please note that the iClamp is not compatible with the Lightning version of the i-XY.
| Weight | 6.00gm |
| Dimensions | 25.00mmH x 40.00mmW x 50.00mmD |
| Warranty | 1 year |
RODE invisiLav Discreet Lavalier Mounting System (10-Pack)
$ 40.00 - Sold Out
Discreet skinsafe mount for lavalier microphones. Supports RODE Lavalier and smartLav. Pack of 10.
The RØDE invisiLav is designed to aid the concealing of the Lavalier and smartLav microphones. Its soft construction absorbs noise and vibration, while the wide, flat profile provides coverage from the elements and allows for versatile mounting. There's two mounting points in case a redundant mic is required, and cable management on the side. Available in either a pack of three or a bulk pack of ten, the invisiLav comes with pre-cut, skinsafe adhesive that can be used to stick the invisiLav to either the body or to fabric. The invisiLav itself is also made from a medical grade skin safe material so it can be mounted on the body without fear of irritation.
| Weight | 5.00gm |
| Dimensions | 18.00mmH x 25.00mmW x 6.00mmD |
| Warranty | 1 year |
RODE invisiLav Discreet Lavalier Mounting System (3-Pack)
$ 18.00 - Sold Out
Discreet skinsafe mount for lavalier microphones. Supports RODE Lavalier and smartLav. Pack of 3.
The RØDE invisiLav is designed to aid the concealing of the Lavalier and smartLav microphones. Its soft construction absorbs noise and vibration, while the wide, flat profile provides coverage from the elements and allows for versatile mounting. There's two mounting points in case a redundant mic is required, and cable management on the side. Available in either a pack of three or a bulk pack of ten, the invisiLav comes with pre-cut, skinsafe adhesive that can be used to stick the invisiLav to either the body or to fabric. The invisiLav itself is also made from a medical grade skin safe material so it can be mounted on the body without fear of irritation.
RODE iXY-L Stereo Microphone (Lightning Connector)
$ 199.00 - Sold Out
RODE iXY-L Stereo Microphone (Lightning Connector)
Rode SKU: iXY-L | Helix SKU: RMiXYL
Overview
Digital stereo microphone (up to 24/96K recording) for lightning-compatible Apple devices including iPhone 5, 5s & 5c. Supplied with carry case and windshield.
- Record stereo audio at 24-bit, 96kHz*
- Matched pair of 1/2" cardioid condenser capsules
- Metal casing for enhanced durability and electromagnetic interference immunity.
- Includes windshield, zip case
- Software-switchable 72Hz high pass filter for reduction of unwanted low frequency noise.
- iXY-L compatible with iPhone 5, iPhone 5s, iPhone 5c, iPhone 6 and iPhone 6plus.
- iXY-30PIN compatible with iPhone 4s and earlier
- Twelve month warranty
The RØDE i-XY is the ultimate recording microphone for iPhone® and iPad®. With up to 24-bit/96k* recording and on-board high-fidelity A/D conversion, your i-XY recordings are rich, smooth and accurate. At the heart of the i-XY is a matched pair of ½” cardioid condenser capsules, fixed in a perfect 90 degree ‘near-coincident’ alignment. This results in immersive and true-to-life stereo recordings, captured in incredibly high detail. Designed and manufactured in Australia, the i-XY is available in two versions - Lightning and 30-pin. The Lightning version supports the iPhone® 5s, iPhone® 5 and iPhone® 5c. The 30-pin version supports the iPhone® 4S, iPhone® 4, iPad® (3rd generation) and iPad® 2. A foam windshield is supplied for outdoor recording as well as a reinforced protective zip case to ensure your i-XY is available whenever you need it. *RØDE Rec or RØDE Rec LE app required for 24/96 quality. iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other countries.
Specifications
| Acoustic Principle | Pressure Gradient |
| Capsule | 0.50" |
| Polar Pattern |
|
| Address Type | End |
| Frequency Range | 20Hz - 20kHz |
| Output Impedance | 0Ω |
| Maximum SPL | 120dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Sensitivity | -42.0dB re 1 Volt/Pascal (8.52mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 18dB-A |
| Weight | 40.00gm |
| Dimensions | 46.00mmH x 55.00mmW x 40.00mmD |
| Warranty | 1 year |
What's in the Box
|
i-XY (Lightning Version) Stereo Microphone for Apple iPhone® & iPad® |
 |
Wind Shield |
 |
Zip Pod |
RODE LAV-CLIP Clip Mount for RODE Lavaliers (Pack of 3)
$ 24.99 - Sold Out
The LAV-CLIP is an ergonomic and discreet clip mount for the RØDE Lavalier microphone.The LAV-CLIP is supplied in a pack of three.
RODE Lav-Headset Headset mount for Lavalier Microphones - Junior Size
$ 25.00 - Sold Out
Headset mount for Lavalier Microphones. Compatible with RØDE Lavalier and smartLav+. Junior size.
The Lav-Headset is an innovative and ergonomic headset-style wearable mount that offers increased versatility for users of the RØDE Lavalier and smartLav+ lapel microphones. It allows the microphone to be worn in close proximity to the mouth for optimal audio performance.
Engineered from spring steel that has been plated for lifelong durability, the mount is designed to hold its shape throughout the rigors of repeated use. Integrated cable management at the rear of the mount ensures that the microphone cable is tightly secured and provides strain relief.
The Lav-headset is available in three sizes to comfortably accommodate a range of head sizes. As a general guide the sizes are:
- Junior – Ages up to 13
- Medium – Teen to Adult
- Large – Larger Adult
Lav-Headset Specifications:
| Weight | 5gm |
| Dimensions | 100mmH x 140mmW x 200mmD |
| Warranty | 1 year |
RODE Lav-Headset Headset mount for Lavalier Microphones - Large Size
$ 25.00 - Sold Out
Headset mount for Lavalier Microphones. Compatible with RØDE Lavalier and smartLav+. Large size.
The Lav-Headset is an innovative and ergonomic headset-style wearable mount that offers increased versatility for users of the RØDE Lavalier and smartLav+ lapel microphones. It allows the microphone to be worn in close proximity to the mouth for optimal audio performance.
Engineered from spring steel that has been plated for lifelong durability, the mount is designed to hold its shape throughout the rigors of repeated use. Integrated cable management at the rear of the mount ensures that the microphone cable is tightly secured and provides strain relief.
The Lav-headset is available in three sizes to comfortably accommodate a range of head sizes. As a general guide the sizes are:
- Junior – Ages up to 13
- Medium – Teen to Adult
- Large – Larger Adult
Lav-Headset Specifications:
| Weight | 5gm |
| Dimensions | 100mmH x 140mmW x 200mmD |
| Warranty | 1 year |
