ProMaster Advanced 633x SDXC - 64GB
$ 19.95
ProMaster Advanced 633x SDXC - 64GB
ProMaster SKU: 4969 | Helix SKU: PR4969
Overview
ProMaster Advanced Memory Cards offer excellent performance at an affordable price. Your camera will perform well in all modes, including video at high resolutions, thanks to the U3 design and fast read AND write speeds of Advanced Memory Cards.
- 64GB SDXC
- 633X
- 95MB/s Read Speed
- 90MB/s Write Speed
- UHS-1 Speed class 3, U3
- V30 Video speed class
- Operating temperature range: 32 to 158F (0 to 70C)
ProMaster AGUA NEOPRENE POUCH - BLACK
$ 9.95
ProMaster AGUA NEOPRENE POUCH - BLACK
ProMaster AGUA NEOPRENE POUCH - BLUE
$ 9.95
ProMaster AGUA NEOPRENE POUCH - BLUE
ProMaster AGUA NEOPRENE POUCH - GREEN
$ 9.95
ProMaster AGUA NEOPRENE POUCH - GREEN
ProMaster AGUA NEOPRENE POUCH - RED
$ 9.95
ProMaster AGUA NEOPRENE POUCH - RED
ProMaster Air Support Monopod AS425
$ 99.95 - Sold Out
ProMaster Air Support Monopod AS425
ProMaster SKU: 5121 | Helix SKU: PR51211
Overview
Lightning-fast height adjustment without the need for traditional leg locks.
ProMaster's Air Support Monopod is lightning fast to deploy and adjust. Just pull to extend it or squeeze two buttons to retract it. Unlike a traditional monopod, the ProMaster Air Support requires no leg locks. Its unique air pressure system saves time and even allows you to fine-tune the height while shooting!
This Kit includes a folding, 3-leg base as well as a soft monopod foot and a fabric storage case.
Use the 3-leg base for the best stability. A ball joint is built into the 3-leg base which allows the monopod to pan and tilt. This ball joint can be locked so the unit will not tilt but can still pan. The legs of the base can be folded-up for easy transport. A soft foot is attached to the bottom of the 3-leg base for use when the legs are folded. Additionally, the soft foot can be installed directly on to the monopod when the 3-leg base is removed. This creates a smaller, lighter rig with a more traditional, single-foot.
The main connection at the top of the Air Support is a reversible bolt that can be used to attach a camera or head. One side of the bolt is a ¼”-16 thread which is common to most cameras and some heads. The opposite side is a larger 3/8”-16 thread which is common to many heads.
The AS425 is a 4-section monopod kit with a maximum working height of 62 3/4" and a maximum load rating of 8 lbs. 13 oz. It collapses down to 24” (with the 3-leg base installed) for easy transport. For more information see the specifications section of this listing.
Key Features:
- Rapid Height Adjustment, no leg locks to fuss with
- Convertible between 3-leg base and single-foot monopod
- 3-leg base has a built-in ball joint for smooth panning and tilting
- Ball joint lock allows for smooth, even panning without tilt
- Reversible 1/4"-20 / 3/8"-16 bolt for attaching a camera or head
Specifications
Specifications
Kit Specifications
| Maximum Working Height: | 62 3/4" / 159.4 cm |
| Minimum Working Height: | 24 3/4" / 62.9 cm |
| Folded Length: | 24" / 61 cm |
| Maximum Load: | 8 lbs 13 oz / 4 kg |
| Material: | Aluminum |
| Sections: | 4 |
| Weight: | 2 lbs 1/2 oz / 0.92 kg |
Monopod Specifications
| Maximum Working Height: | 59 1/4" / 150.5 cm |
| Minimum Working Height: | 21" / 53.3 cm |
| Closed Length: | 21" / 53.3 cm |
| Weight: | 1 lb 2 oz / 0.51 kg |
Base Specifications
| Height: | 4 1/2" / 11.4 cm |
| Closed Length: | 9 1/8" / 23.2 cm |
| Weight: | 14 1/2 oz / 0.41 kg |
Note: Kit specifications are with 3-leg base installed & soft foot
Note: Monopod specifications are with soft foot installed.
Item Includes
Includes:
- AS425 Monopod
- 3-Leg, Folding Base
- Soft Monopod Foot
- Fabric Storage Case
ProMaster Air Support Monopod AS431
$ 119.95 - Sold Out
ProMaster Air Support Monopod AS431
ProMaster SKU: 5122 | Helix SKU: PR51228
Overview
Lightning-fast height adjustment without the need for traditional leg locks.
ProMaster's Air Support Monopod is lightning fast to deploy and adjust. Just pull to extend it or squeeze two buttons to retract it. Unlike a traditional monopod, the ProMaster Air Support requires no leg locks. Its unique air pressure system saves time and even allows you to fine-tune the height while shooting!
This Kit includes a folding, 3-leg base as well as a soft monopod foot and a fabric storage case.
Use the 3-leg base for the best stability. A ball joint is built into the 3-leg base which allows the monopod to pan and tilt. This ball joint can be locked so the unit will not tilt but can still pan. The legs of the base can be folded-up for easy transport. A soft foot is attached to the bottom of the 3-leg base for use when the legs are folded. Additionally, the soft foot can be installed directly on to the monopod when the 3-leg base is removed. This creates a smaller, lighter rig with a more traditional, single-foot.
The main connection at the top of the Air Support is a reversible bolt that can be used to attach a camera or head. One side of the bolt is a ¼”-16 thread which is common to most cameras and some heads. The opposite side is a larger 3/8”-16 thread which is common to many heads.
The AS431 is a 4-section monopod kit with a maximum working height of 63 1/2" and a maximum load rating of 15 lbs 7 oz. It collapses down to 24 1/8” (with the 3-leg base installed) for easy transport. For more information see the specifications section of this listing.
Key Features:
- Rapid Height Adjustment, no leg locks to fuss with
- Convertible between 3-leg base and single-foot monopod
- 3-leg base has a built-in ball joint for smooth panning and tilting
- Ball joint lock allows for smooth, even panning without tilt
- Reversible 1/4"-20 / 3/8"-16 bolt for attaching a camera or head
Specifications
Specifications
Kit Specifications
| Maximum Working Height: | 63 1/2" / 161.3 cm |
| Minimum Working Height: | 24 7/8" / 63.2 cm |
| Folded Length: | 24 1/8" / 61.3 cm |
| Maximum Load: | 15 lbs 7 oz / 7 kg |
| Material: | Aluminum |
| Sections: | 4 |
| Weight: | 2 lbs 4 1/2 oz / 1.03 kg |
Monopod Specifications
| Maximum Working Height: | 60" / 152.4 cm |
| Minimum Working Height: | 21 1/4" / 54 cm |
| Closed Length: | 21 1/4" / 54 cm |
| Weight: | 1 lb 6 oz / 0.62 kg |
Base Specifications
| Height: | 4 1/2" / 11.4 cm |
| Closed Length: | 9 1/8" / 23.2 cm |
| Weight: | 14 1/2 oz / 0.41 kg |
Note: Kit specifications are with 3-leg base installed & soft foot
Note: Monopod specifications are with soft foot installed.
Item Includes
Includes:
- AS431 Monopod
- 3-Leg, Folding Base
- Soft Monopod Foot
- Fabric Storage Case
ProMaster ALCSH108 Replacement Lens Hood for Sony
$ 29.95
ProMaster ALCSH108 Replacement Lens Hood for Sony
ProMaster All-In-One Memory Card Reader USB 2.0
$ 29.95
ProMaster All-In-One Memory Card Reader USB 2.0 - PR3484
The ProMaster All-In-One Card Reader - USB 2.0 (N) makes it easy to read and write files. Insert a memory card into the reader and it appears as a drive on your computer. Use up to four different types of cards at once and you can copy files between cards and your computer! The three USB ports work as a hub to connect a variety of devices.
Universal: Reads most types of memory cards
Fast file transfers: Uses USB 2.0 for fast downloads at up to 480Mb/s
Increases usable USB ports: Works as a USB hub to connect up to 3 other USB devices to you computer.
Purchase the optional AC adapter and it upgrades to a powered USB hub for best performance with your high power draining peripherals.
Supported Media: Compact Flash type I, Secure Digital (SD, SDHC, SDXC), Mini SD, Micro SD, MMC, Memory Stick, Memory Stick Pro, Memory Stick Duo, USB A Flash Drives. *Some cards may require an adapter
ProMaster All-In-One Worldwide AC Travel Adapter
$ 19.95
Promaster All-In-One Worldwide AC Travel Adapter Ultra compact and convenient, the ProMaster All-In-One Worldwide Travel Adapter is the only plug adapter you will need to travel the world. It can be used in more than 150 countries. Plug Adapter and Voltage Converter Input: 110V - 220V Output: 10 Amps Color: White
ProMaster ANTIQUE BACKDROP 12'-RED/BLK
$ 89.95
ProMaster ANTIQUE BACKDROP 12'-RED/BLK
ProMaster ANTIQUE BACKDROP 12'-WH/BLK 2
$ 89.95
ProMaster ANTIQUE BACKDROP 12'-WH/BLK 2
ProMaster ARTICULATING ARM - 11"
$ 44.95
ProMaster ARTICULATING ARM - 11"
ProMaster Audio Cable 2.5mm Male to 3.5mm Female - Coiled
$ 9.95
ProMaster Audio Cable 2.5mm Male to 3.5mm Female - Coiled
Mfr SKU: 25588 | Helix SKU: PR25588
Overview:
The audio cable is useful for adapting microphones having a 3.5mm male 3-pole cord to cameras using a smaller 2.5mm mic jack. It is a coiled cord approximately 1 foot in length when relaxed. The 2.5mm male portion connects to the camera while the 3.5mm femail portion connects to the microphones 3.5mm male cord.
ProMaster Audio Cable 2.5mm Male to 3.5mm Male - Coiled
$ 9.95
ProMaster Audio Cable 2.5mm Male to 3.5mm Male - Coiled
Mfr SKU: 25519 | Helix SKU: PR25519
Overview:
The audio cable is useful for connecting microphones having a 3.5mm female 3-pole port to cameras using a smaller 2.5mm mic jack. It is a coiled cord approximately 1 foot in length when relaxed.
ProMaster AXIS Mobile Stabilizer
$ 69.95
ProMaster AXIS Mobile Stabilizer
ProMaster SKU: 6677 | Helix SKU: PR6677
Overview
Videos from your phone look their best when they are as steady as possible. The PROMASTER AXIS is your solution to eliminate the shake. This compact motorized stabilizer works with your phone to create smooth video footage. An internal rechargeable battery powers the Axis for hours. It can even recharge your phone's battery in a pinch! Whether or not you have a protective case on your phone, the Axis connects securely in just seconds. Its compact size means you can take it everywhere and record the best video memories of once in a lifetime events.
Axis Features include:
- Connects to most phones with or without a protective case
- Silent operation so you also get the best audio
- Built-in rechargeable battery runs for up to 8 hours of video
- Can serve as a 'power bank' by recharging your phone's internal battery
- Mounts anywhere via the built-in tripod mount
- Dust and light splash resistant to IP54 standards
Specifications
- Dimensions: 4 1/2" x 3 1/8" x 2 5/8" (115 mm x 79 mm x 66 mm)
- Weight: 7.6 oz / 215 g
- Internal battery capacity: 2600 mAh
- Run time on a full charge: approximately 8 hours
- Charging input: 5V 1.5A
- USB power output: 5V 1.5A
- Encasement protection: IP54
Includes:
- Axis phone stabilizer
- USB charging cable
- Additional grip handle
- Note: A USB cable is included for charging the Axis from a common USB-A port. For wall AC charging, a USB household adapter is required but no included.
ProMaster B&W PHOTO PAPER - 5X7 E 100SH
$ 54.95
ProMaster B&W PHOTO PAPER - 5X7 E 100SH
ProMaster B&W PHOTO PAPER - 5X7 F 100SH
$ 54.95
ProMaster B&W PHOTO PAPER - 5X7 F 100SH
ProMaster B&W PHOTO PAPER - 8X10 E 100SH
$ 109.95
ProMaster B&W PHOTO PAPER - 8X10 E 100SH
ProMaster B&W PHOTO PAPER - 8X10 F 100SH
$ 109.95
ProMaster B&W PHOTO PAPER - 8X10 F 100SH
ProMaster B&W PHOTO PAPER - 8X10 F 25SH
$ 34.95
ProMaster B&W PHOTO PAPER - 8X10 F 25SH
PROMASTER B&W Photo Paper 8" x10" E Luster 25 sheets - 8 x 10'' Luster - 25 Sheets
$ 34.95
PROMASTER B&W Photo Paper 8" x10" E Luster 25 sheets - 8 x 10'' Luster - 25 Sheets
PROMASTER SKU: 3045 | Helix SKU: PR3045
Overview
Variable contrast black and white photographic paper • Compatible with Kodak Polycontrast® filters
ProMaster PhotoImage Black and White Photographic Paper is a black and white variable contrast enlargement paper. It is medium weight with a resin coating that can be used in both enlargers and automatic printers. PhotoImage Black and White Photographic Paper is available 5x7" and 8x10" sizes in both a professional glossy "F" surface and fingerprint resistant luster "E" surface.
ProMaster Background Crossbar Kit
$ 49.00
ProMaster Background Crossbar Kit
ProMaster Basis BR130D Daylight LED Ringlight - 14"
$ 139.95
ProMaster Basis BR130D Daylight LED Ringlight - 14"
ProMaster SKU: 8798 | Helix SKU: PR87982
Overview
The ProMaster Basis BR130D Ringlight creates an attractive, glowing light that appears soft and even on your subject, with reduced shadows. It’s great for still photography and videography in portraiture, fashion, interviews, and more. A natural, round catchlight will appear in the subject’s eyes. This light also decreases the appearance of blemishes due to its direct, near-shadowless illumination. A center-mounting camera bracket is included. Attach your camera directly to the bracket or add a tripod head for a greater range of adjustments. The BR130D is daylight balanced with an adjustable brightness of 10 – 100%. It runs on AC power and includes a generously long power cord.
Specifications
SPECIFICATIONS:
+ LEDs: 180
+ Output Power:
1100 lux at 3’ / 1 m at maximum power
130 lux at 10’ / 3 m at maximum power
Luminous Flux: 4,000 lm
+ Output Adjustment: 10 – 100%
+ Color Temperature: 5600 +/- 200K
+ Color Accuracy: CRI 95+
+ Power: AC 100 – 240 V 50 – 60 Hz
+ Dimensions:
Height: 17 ½” / 44.5 cm
Outer diameter: 14” / 35.6 cm
Inner diameter: 9” / 22.9 cm
Thickness: 1 ¾” / 44 mm
Weight: 2 lbs 4 oz / 1.02 kg
Item Includes
+ 1 BASIS BR130D RINGLIGHT
+ 1 Camera mounting bracket (also accepts a tripod head)
CA Residents: Prop 65 WARNING(S)
ProMaster Battery Cable for VL-1144 LED Studio Light
$ 39.95
ProMaster Battery Cable for VL-1144 LED Studio Light
ProMaster Battery Pack for VL-1144 Studio Light
$ 199.95
ProMaster Battery Pack for VL-1144 Studio Light
ProMaster SKU: 9483 | Helix SKU: PR9483
Overview
ProMaster battery pack for the VL-1144 Studio Light. 12V battery pack allows for portable use.
Dimensions: Aprox. 7 1/2" x 7 1/2" x 3 1/2"
Includes carrying case with shoulder strap, charger, and interface cable
ProMaster Battery Pack for VL380 LED Light
$ 69.95
ProMaster Battery Pack for VL380 LED Light
ProMaster Binocular Tripod Adapter
$ 15.00
ProMaster Binocular Tripod Adapter
ProMaster BLACK WIDOW THIN PLATE (W/NUT)
$ 15.99
ProMaster BLACK WIDOW THIN PLATE (W/NUT)
ProMaster Body Cap - 4/3
$ 9.95
ProMaster Body Cap - 4/3
ProMaster SKU: 4344 | Helix SKU: PR4344
Overview
ProMaster Body Caps keep dust and dirt out of your camera body when you are storing it with the lens removed.
ProMaster Body Cap - Canon EOS
$ 9.95
ProMaster Body Cap - Canon EOS
ProMaster SKU: 4358 | Helix SKU: PR4358
Overview
Protects your Camera from dust and damage while lenses are detached.
Fits all Canon EOS Bodies, film and digital.
ProMaster Body Cap - Canon M
$ 9.95
ProMaster Body Cap - Canon M
ProMaster SKU: 3795 | Helix SKU: PR3795
Overview
ProMaster Body Caps keep dust and dirt out of your camera body when you are storing it with the lens removed.
ProMaster Body Cap - Fuji X
$ 9.95
ProMaster Body Cap - Fuji X
ProMaster SKU: 1989 | Helix SKU: PR1989
Overview
Body Caps keep dust and dirt out of your camera body when you are storing it with the lens removed.
ProMaster Body Cap - Micro 4/3
$ 9.95
ProMaster Body Cap - Micro 4/3
ProMaster SKU: 7130 | Helix SKU: PR7130
Overview
ProMaster Body Caps keep dust and dirt out of your camera body when you are storing it with the lens removed.
ProMaster Body Cap - Nikon
$ 9.95
ProMaster Body Cap - Nikon
ProMaster SKU: 4351 | Helix SKU: PR4351
OVERVIEW
ProMaster Body Caps keep dust and dirt out of your camera body when you are storing it with the lens removed.
ProMaster Body Cap - Pentax
$ 9.95
ProMaster Body Cap - Pentax
ProMaster SKU: 4330 | Helix SKU: PR4330
OVERVIEW
ProMaster Body Caps keep dust and dirt out of your camera body when you are storing it with the lens removed.
ProMaster Body Cap - Samsung NX
$ 9.95
ProMaster Body Cap - Samsung NX
ProMaster SKU: 7137 | Helix SKU: PR7137
OVERVIEW
ProMaster Body Caps keep dust and dirt out of your camera body when you are storing it with the lens removed
ProMaster Body Cap - Sony A-Mount
$ 9.95
ProMaster Body Cap - Sony A-Mount
ProMaster SKU: 4337 | Helix SKU: PR4337
Overview
ProMaster Body Caps keep dust and dirt out of your camera body when you are storing it with the lens removed.
ProMaster Body Cap - Sony E-Mount
$ 9.95
ProMaster Body Cap - Sony E-Mount
ProMaster SKU: 7732 | Helix SKU: PR7732
OVERVIEW
ProMaster Body Caps keep dust and dirt out of your camera body when you are storing it with the lens removed.
ProMaster Bowens Mount Adapter for P180/PD300
$ 29.95
ProMaster Bowens Mount Adapter for P180/PD300
ProMaster BP-511A Li-ion Battery for Canon
$ 31.95
ProMaster BP-511A Li-ion Battery for Canon
ProMaster SKU: 9767 | Helix SKU: PR9767
Overview
ProMaster batteries are a high quality, long lasting power source for your digital camera or camcorder. ProMaster replacement batteries are manufactured to meet or exceed the equipment manufacturer's specifications.
7.4V 1600 mAH Lithium Ion
Replaces Canon BP-511, BP-511A, BP-512, BP-522 batteries
