Quantum Turbo 3 Rechargeable Battery
$ 655.95
Quantum Turbo 3 Rechargeable Battery
Quantum SKU: 860140 | Helix SKU: QU860140
Overview
When you are shooting a big assignment, traveling in remote locations, your camera or flash batteries are drained and your are without access to electricity, then the ideal solution is the Turbo 3 Rechargeable Battery from Quantum Instruments. This is a high voltage battery that works with most shoe- and handle-mount professional quality flash units and all Quantum Qflash, T-series and Trio/Pilot portable flashes. The Turbo 3 has the capacity to provide 1050 full-power flashes for shoe-mount and 750 flashes for handle-mount flash units.
The Turbo 3 has two outlets so you can simultaneously power a digital camera and a flash or two flashes. Cables are secured to the battery with locking sockets so you don't have to worry about a cable falling out while you are in the middle of shooting. Compatible cables for Nikon, Canon and Qflash Trio are available (sold separately).
This NiMH battery is equipped with four "fuel gauge" LED status indicators which keep you aware of how much power you have left. Recycling times average one second and it takes about three hours to fully charge the unit with the included standard battery charger.
Turbo 3 is Quantum's highest-capacity battery. It weighs only 32 oz (900 g) and can be carried around easily with the included belt clip.
- Unlike other types of batteries, the Turbo 3 uses NiMH batteries that have no "memory." You can "top off" your Turbo 3 at any time, or give it a quick charge to get a few more shots.
- Secure locking flash cables for Nikon, Canon and Qflash TRIO with the locking sockets of the Turbo 3 are sold separately.
- The Turbo 3 is supplied with a belt clip, and has fittings for an optional shoulder strap. It can also be conveniently mounted on a light stand or tripod, using the optional Quantum Battery Clamp (QBC).
- Using the two outlets on the Turbo 3, you can simultaneously power a digital camera and a flash or two flashes.
- A standard charger (100-240 volts) is included with the Turbo 3. Chargers are also available for many other countries, and for your vehicle.
- After long and/or frequent use, the internal battery can be replaced by Quantum Instruments at a nominal cost.
- To check the Turbo 3 capacity when it is not connected, depress the ON button until the "fuel gauge" LED display comes on to read the power level. The gauge will automatically turn off.
Specifications
-
Chemistry NiMH Capacity Full Power Flashes
Shoe mount: 1050
Handle mount: 750
Qflash: 600
Trio: 1050
Full Power Flashes with Flash & Digital Camera
Shoe mount: 600
Handle mount: 450
Qflash: 375
Trio: 630
Typical Partial-Power Flashes in Automatic/TTL Mode
Shoe mount: 1275
Handle mount: 900
Qflash: 750
Trio: 630Recycling Time Shoe mount: 1 sec
Handle mount: 1.1 sec
Qflash: 1.9 sec
Trio: 1 secRecharge Time 3 hr Dimensions (LxWxH) 5.87 x 4 x 1.75" (15 x 10 x 4.45 cm) Weight 32 oz (900 g)
Quantum Turbo Slim Compact - AUS/NZ TSCA
$ 368.95
Quantum Turbo Slim Compact - AUS/NZ TSCA
Quantum Turbo Slim Compact - EURO TSCE
$ 368.95
Quantum Turbo Slim Compact - EURO TSCE
Quantum Turbo Slim Compact - UK TSCUK
$ 368.95
Quantum Turbo Slim Compact - UK TSCUK
Quantum Turbo Slim Compact - US/CAN/JPN TSCUS
$ 368.95
Quantum Turbo Slim Compact - US/CAN/JPN TSCUS
Quantum Two step MD cord for Maxxum 7, 9 FW42
$ 114.95
Quantum Two step MD cord for Maxxum 7, 9 FW42
Quantum Two step MD cord FW47
$ 114.95
Quantum Two step MD cord FW47
Quantum UK 230 VAC charger PR1UK
$ 53.95
Quantum UK 230 VAC charger PR1UK
Quantum UK 230 VAC charger QB24
$ 55.95
Quantum UK 230 VAC charger QB24
Quantum UK 230 VAC charger QB29
$ 51.95
Quantum UK 230 VAC charger QB29
Quantum UK73 Triggersmart Cable - Nikon
$ 22.95
Quantum UK73 Triggersmart Cable - Nikon
Quantum Universal AC Power Supply PR4
$ 404.95
Quantum Universal AC Power Supply PR4
Quantum V-mount battery cable OM41
$ 49.95
Quantum V-mount battery cable OM41
Quantum Vehicle charger QB35
$ 110.95
Quantum Vehicle charger QB35
Quantum Vehicle charger QB36
$ 108.95
Quantum Vehicle charger QB36
Quantum Vehicle charger QT46
$ 110.95
Quantum Vehicle charger QT46
Quantum Vehicle charger TCV
$ 96.95
Quantum Vehicle charger TCV
Quantum Video rig rail mounting bracket OM42
$ 96.95
Quantum Video rig rail mounting bracket OM42
Quantum Wide angle diffuser QF67A
$ 38.95
Quantum Wide angle diffuser QF67A
Quantum Wireless TTL adapter for Contax 645 FW64
$ 109.95
Quantum Wireless TTL adapter for Contax 645 FW64
Quantum Wireless TTL adapter for Hasselblad FW59
$ 130.95
Quantum Wireless TTL adapter for Hasselblad FW59
Quantum Wireless TTL adapter for Mamiya 645AF FW65
$ 109.95
Quantum Wireless TTL adapter for Mamiya 645AF FW65
Quantum Wireless TTL adapter for Nikon FW52
$ 109.95
Quantum Wireless TTL adapter for Nikon FW52
R-3 Digital LED Video Light # 323005 - NEW
$ 69.95
R-3 Digital LED Video Light # 323005 - NEW
R-3 II Digital LED Video Light # 323081 - NEW
$ 46.95
R-3 II Digital LED Video Light # 323081 - NEW
The R-3 II features three (3), daylight-balanced Power LEDs that deliver up to 500 lx of illumination, and the unit is dimmable from 20-100%. This light also features a unique barn door system. The barn door system is composed of two (2) barn doors that act as flags to shape your light and of two (2) swing-away filters, one (1) tungsten filter and one (1) diffusion filter. Whether shooting indoors or in tight quarters, the R-3 II offers solutions for adjusting the quality of your light as needed. This light has a standard cold shoe mount that has an integrated 1/4"-20 female thread. The addition of the 1/4"-20 female thread allows for the attachment of mounting accessories such as a Baby Pin, Spigot, or Hand Grip. This R-3 II model comes with a Sony NP-F battery plate. The R-3 II comes in two battery plate options: Sony NP-F and Panasonic D28S.
R-3 LED Video Light - Sony 118111030101
$ 69.95
R-3 LED Video Light - Sony 118111030101
The R-3 features three (3), daylight-balanced Power LEDs that deliver up to 500 lx of illumination, and the unit is dimmable from 20-100%.
This light also features a unique barn door system. The barn door system is composed of two (2) barn doors that act as flags to shape your light and two (2) swing-away filters, one (1) tungsten filter and one (1) diffusion filter. Whether shooting indoors or in tight quarters, the R-3 offers solutions for adjusting the quality of your light as needed.
This R-3 model comes with a Sony NP-F battery plate. This light has a standard cold shoe mount that has an integrated 1/4"-20 female thread. The addition of the 1/4"-20 female thread allows for the attachment of mounting accessories such as a Baby Pin, Spigot, or Hand Grip.
Bulb: Power LEDLight Angle: 80 degrees
Illuminance: 500 lx
Power Variation: 20-100%
Color Rending Index (Ra): 80%
Correlated Color Temperature (CCT): 5600K (3200K w/ Tungsten Filter)
Power Source: Built-in Sony NP-F Battery Pate
Operating Voltage: 5.8-8.4V DC
Lasting Time: 100 minutes with Sony NP-F550
Shoe Type: Standard Cold Shoe w/ integrated 1/4"-20 female thread
Nominal Weight: 11 oz / 325 g (without battery)
Nominal Dimensions: 12.3 x 10 x 7.3 (cm)
Package Contents:
(1) x R-3 Video Light (S)
(1) x Barn Door System
(1) x Operation Manual
(1) x Warranty Card
R-4 Digital LED Video Light (Sony Battery Plate) # ISMND
$ 46.95
R-4 Digital LED Video Light (Sony Battery Plate) # ISMND
R4 is a flicker free and heat-free LED light, which produce 700 lux light,light intensity can be adjusted by the dimmer switch at the back (adjusting without flicker).The R4 produces a 5600K very clean and natural color light.If you need to lower the color temperature, just simply attach Orange Warming filter to the front of the light.You can make the light soft with the White Diffusion filter.
Specification:
Bulb: POWER LED
Illumination Angle: 60 degrees
Watt loss:12w
Luminous: 700Lux
Power Variation: 25-100%
Color Rendering Index(Ri):≥80
Operating Voltage: 5.8V-16.8V
Correlated Colour Temperature(CCT): 5600K/3200K
Battery: F970 battery(not included)
Weight: 325g without battery
Dimensions: 127mm(W) x 72mm(H) x 105mm(D)
Package Contents:
1 x R4 Video Light
1 x Barn Doors Bracket
1 x Diffuser
1 x Color Filter
1 x Manual
R-4 LED Video Light - Panasonic
$ 79.95
R-4 LED Video Light - Panasonic
Description:
This professional LED light features 126 super bright LEDs with an effective light throw of up to 35 feet. The LED light is dimmable so you can adjust the amount of light you need for each project or setting. The base can be tilted so you can aim the light up or down. You can use many type of Sony NP-F, NP-FH series and Panasonic CGR series batteries to power this LED light. Or you can use 6 AA batteries. This light will run for approximately 2.5 hours on a set of AA batteries. The unit is very light weighting only 8.5 oz without batteries. It has a built in battery meter so you will know how much power it has left. There is a power on-off/dimmable switch to adjust the amount light you need. The unit runs very cool and is safe to touch. Mount on any standard size hot shoe. Come with 3 diffusers. Great for shooting wedding ceremony, reception and many other important events.
Features:
- 126 super bright LED's
- LED video light can be tilted up or down
- Built-in Battery Meter
- On-off switch and fully dimmable
- Shoe-mount compatible with all Pro & Consumer video camcorders and DSLR cameras
- Dimensions 4.75" x 6.50" x 2" including shoe mount
(LED Area is 4.75" x 3.75" x 2") - Effective distance - up to 35 feet
- Approx 685+ Lux at 1 Meter
- Approx. 2.5 hours running time on AA Batteries
- Uses standard AA Batteries or Sony & Panasonic batteries that are listed below - Batteries are NOT Included
R-4 LED Video Light - Sony
$ 79.95
R-4 LED Video Light - Sony
The R-4 features four (4), daylight-balanced Power LEDs that deliver up to 700 lx of illumination. This unit is dimmable from 20-100%.
This light also features a unique barn door system. The barn door system is composed of two (2) barn doors that act as flags to shape your light and of two (2) swing-away filters, one (1) tungsten filter and one (1) diffusion filter. Whether shooting indoors, outdoors, or in tight quarters, the R-4 offers solutions for adjusting the quality of your light as needed.
This light has a standard cold shoe mount that has an integrated 1/4"-20 female thread. The addition of the 1/4"-20 female thread allows for the attachment of mounting accessories such as a Baby Pin, Spigot, or Hand Grip.
The R-4 comes with a built-in Sony NP-F battery plate.
Specifications:
- Bulb: Power LED
- Light Beam Angle: 60 degrees
- Illuminance: 700 lx
- Power Variation: Stepless 20-100%
- Color Rending Index (Ra): 80%
- Correlated Color Temperature (CCT): 5600K (3200K w/ Tungsten Filter)
- Power Sources: Sony NP-F Battery
- Operating Voltage: 5.8-8.4V
- Battery Life: 70mins with Sony NP-F550
- Mounting: Standard Cold Shoe w/ integrated 1/4"-20 female thread
- Nominal Weight: 14 oz / 397 g (w/ barn door system)
- Nominal Dimensions: 12.3 x 12 x 6.2 (cm)
Package Contents:
(1) x R-50 LED Light Panel(1) x 1/4;-20" Male Thread to Cold Shoe Adapter
(1) x Swinging Tungsten Filter
(1) x Swinging Diffusion Filter
(1) x Wide-angle Diffuser
(1) x Operation Manual
(1) x Warranty Card
R-50 LED Video Light
$ 69.95
R-50 LED Video Light
The R-50 LED Light Panel features fifty (50), daylight balanced Power LEDs that deliver up to 500 lx of illumination. This light is dimmable from 0-100% and can be powered by either AA batteries or by an external power source through its DC 2.5 jack.
This light features two swing away filters: one (1) tungsten filter and one (1) diffusion filter. The light comes standard with an 1/4"-20 Male Thread to Cold Shoe Adapter which attaches to the R-50 1/4;"-20 female thread-in.
Specifications:
- Bulb: Power LED
- LED Count: 50
- Light Beam Angle: 60 degrees
- Illuminance: 500 lx
- Power Variation: 0-100%
- Color Rending Index (Ra): 85%
- Correlated Color Temperature (CCT): 5600K (3200K w/ Tungsten Filter)
- Power Sources: AA Batteries / DC 2.5 jack
- Operating Voltage: 5-15V
- Battery Type: 4x AA Battery (Not Included)
- Battery Life: 80mins with AA Battery
- Mounting: 1/4;"-20 Female Thread-in; Packaged with 1/4"-20 Male Thread to Cold Shoe Adapter
- Nominal Weight: 6 oz / 192 g
- Nominal Dimensions: 10.5 x 8.8 x 5.6 (cm)
Package Contents:
(1) x R-50 LED Light Panel(1) x 1/4";-20 Male Thread to Cold Shoe Adapter
(1) x Swinging Tungsten Filter
(1) x Swinging Diffusion Filter
(1) x Wide-angle Diffuser
(1) x Operation Manual
(1) x Warranty Card
Ranger Quadra Hybrid Lead Standard Set A
$ 1,819.99 - Vendido
Ranger Quadra Hybrid Lead Standard Set A
Ray Flash Universal Long (Most Full Size DSLR Bodies)
$ 139.95
Ray Flash Universal Long (Most Full Size DSLR Bodies)
Ray Flash Universal Short (Most Compact DSLR Bodies)
$ 139.95
Ray Flash Universal Short (Most Compact DSLR Bodies)
RE)S-V (401228) RS2 6.5' LIGHT STD
$ 39.95
RE)S-V (401228) RS2 6.5' LIGHT STD
RE)S-V (401293) RS6 6' STAND
$ 51.95
RE)S-V (401293) RS6 6' STAND
ReefMaster RM-4K Camera
$ 349.00 - Vendido
SeaLife ReefMaster RM-4K Underwater Camera and Housing
- Depth up to 130f
- Compact design for portability and storage
- Powered by a removable lithium-ion rechargeable battery
- Wi-Fi sharing to easily preview, download and share to a smartphone or tablet
- Expand memory with a Micro SDHC memory card up to 120GB
- 2.0” LCD screen to review images and video
- Waterproof housing covers inner camera with Moisture Muncher to avoid fogging
ReefMaster RM-4K Camera
Adjustable wrist strap (SL50102)
Lens Cap (SL50113)
USB cable adapter (SL50103)
USB cable (3ft /90 cm) (SL51004)
Wall Charger w/ US plug(110-240V, 50/60 Hz) (SL50105)
Int’l wall Charger adapters (EU, UK, AU) (SL50106)
Camera pouch (SL50107)
Remote Switch 60-T3 , 2'
$ 5.00
Electromagnetic cable release. Operates AF & metering separately from shutter release, also features Running Lock.
For the T70, T90, EOS 650, 620, 750, 850, 630, 1, RT, A2, A2e, 1N & 1N-RS Cameras 1V, 1V-HS & EOS 3 Cameras Require Adapters
Retaining Ring 59mm x 0.5mm Thread - Jam Nut / Retainer
$ 0.00 - Vendido
Retaining Ring 59mm x 0.5mm Thread - Jam Nut / Retainer
Retrospective 20 -Black
$ 174.75
Created for the professional photographer that wants to blend in with the crowd and remain inconspicuous in any situation. This bag combines the look and feel of "old-school" camera bags with "new-school" features and technology for the digital imaging age. KEY FEATURES Minimalist outer appearance conceals expensive photo equipment Carries a gripped DSLR with zoom lens attached Taller size to fit a 70-200mm f/2.8 lens attached to camera Black (1100D 'polyspun' polyester exterior fabric), Pinestone (sand washed cotton canvas) and Blue State (sand washed cotton canvas) GEAR PROFILE 1 gripped DSLR with up to a 70-200mm f/2.8 lens attached, plus 1-3 additional lenses 1 gripped DLSR (body only) in front pocket and 2-4 lenses in main compartment, including a 70-200mm f/2.8 1 standard body attached to a 70-200mm f/2.8 alongside a 300mm f/2.8 lens unattached TECHNICAL SPECIFICATIONS Interior Dimensions: 12" W x 11.75" H x 6" D (30.5 x 29.8 x 15.2 cm)* *Bag softness and flexibility allows expansion to carry a pro size DSLR with lens attached, facing down Exterior Dimensions: 13" W x 12.5" H x 7" D (33 x 31.7 x 17.8 cm) Weight: 3.2 lbs (1.5 kg) MATERIALS Exterior: For superior water-resistance, all exterior fabric has a durable water-repellent (DWR) coating, plus the underside of the fabric has a polyurethane coating. It's also constructed with 1100D polyspun polyester, antique nickel-plated metal hardware, YKK® RC Fuse (abrasion resistant) zippers, nylon webbing, 3-ply bonded nylon thread. Interior: Removable closed cell foam inserts with reinforced PE board, 210D silver-toned nylon, polyurethane-backed Velex, 2x polyurethane-coated nylon 210T seam-sealed rain cover, 3-ply bonded nylon thread.
Right Angle Baby Plate
$ 24.95 - Vendido
This wall plate contains a 5/8" baby stud bent at a 90 degree angle, with eight mounting holes for screws or nails.
RODE 3.5mm TRRS to TRRS patch 1.6m cable
$ 30.00 - Vendido
RODE 3.5mm TRRS to TRRS patch 1.6m cable
Rode SKU: SC9 | Helix SKU: RMSC9
Overview
The SC9 is a high-quality 1.5m TRRS to TRRS cable for easy and reliable connection of smartphones to the RØDECaster Pro.
Specifications:
Connector-1 1 x 1/8" / 3.5 mm TRRS Male Straight
Connector-2 1 x 1/8" / 3.5 mm TRRS Male Straight
Cable Length 4.92' / 1.5 m
RODE 3/8" Pivoting Boom Adaptor
$ 30.00 - Vendido
RODE 3/8" Pivoting Boom Adaptor
The RØDE Pivot Adaptor is a durable machined-aluminium, brass and high-grade polymer adaptor for mounting on boom stands and boompoles, allowing for up to 210 degrees of pivot. A 5/8" to 3/8" adaptor is included.
| Weight | 92.00gm |
| Dimensions | 70.00mmH x 45.00mmW x 33.00mmD |
| Warranty | 1 year |
RODE Blimp with Rycote Lyre Suspension System
$ 299.00 - Vendido
RODE Blimp with Rycote Lyre Suspension System
- Greatly reduces handling and wind noise
- Accommodates most shotgun microphones 325mm in length and 19-22mm diameter
- Rycote Lyre suspension system onboard with internal spacing guide
- Lightweight skeleton handle with 3/8” thread mount
- Mogami cable with Neutrik and Switchcraft XLR connectors
- Dead Wombat windshield included
- 10 year warranty (no registration required)
The RØDE Blimp is a complete windshield and shock mounting accessory for the NTG1, NTG2, NTG3, NTG4 and NTG4+ microphones, as well as any third party shotgun microphone up to 325mm (12 ¾”) in length. Now featuring the Rycote® Lyre suspension system, the Blimp provides the ultimate in microphone suspension and isolation. Constructed from a single piece of hard-wearing thermoplastic, the Lyre provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap. The Blimp’s handle has also been completely redesigned, reducing the product weight significantly, while increasing the ergonomics for handheld use. Housed inside the grip is a heavy-duty Mogami cable which splits via a junction box to a highly-flexible thin cable inside the Blimp, to minimise the transference of vibration to the microphone. With the lightweight design of the handle and suspension system the new Blimp design is over 25% lighter (550gm without microphone or DeadWombat fitted). The Blimp attaches to any standard boompole via 3/8" thread attachment at the base. The Universal Blimp Mount is available as an option to remove the handle when the Blimp is being used primarily on a boompole to reduce weight. The Dead Wombat windshield, caring brush and tail/patch cable are included. The added confidence of a full ten year warranty* ensures that the Blimp is by far the best microphone windshield system available, further evidenced by a 2009 Red Dot Award and Australian International Design Award for outstanding product design. *Excludes normal wear and tear of Dead Wombat furry cover or any misuse, modification or improper storage and transportation of the product.
| Weight | 550gm |
| Dimensions | 285.00mmH x 490.00mmW x 125.00mmD |
| Warranty | 10 year warranty |
RODE Boompole Bag for Boompole, Shotgun Mic, Softie and Shock Mount
$ 39.95 - Vendido
Designed to carry the Boompole with attached mic and shock mount.
| Weight | 575.00gm |
| Dimensions | 960.00mmH x 200.00mmW x 20.00mmD |
| Warranty | 1 year |
RODE Boompole Cips (Pack of 5)
$ 12.99 - Vendido
The RØDE Boompole Clips are designed to quickly and easily mount onto any RØDE boompole to secure the microphone lead and minimise any movement. Pack of 5.
Rode Boompole Microphone Boom Arm
$ 149.00 - Vendido
View larger
Rode Boompole Microphone Boom Arm
Designed for the professional, the Rode Boompole is a high grade professional boom pole for location recording. The boom pole allows you to mount your microphone securely and swivel it in a range of directions that will allow you to easily change positions and follow your sound source. Machine from high grade aluminium.
Features
- Lightweight aluminium construction
- New ultra smooth extension and retraction system
- Easy to use locking mechanism
- Precision balanced
- Extends from 33 inches to 10 feet
- Compatible with NTG1, NTG2, NTG3, NT4, NT5, NT55 and M3 microphones
