Kupo 3-Axis Camera Mounting Plate Kit
$ 253.95 - Vendido
Kupo 3-Axis Camera Mounting Plate Kit
Mfr SKU: KG604312 | Helix SKU: KUKG604312
Overview
The 3-Axis Camera Mounting Plate Kit is designed for mounting a camera on a pipe or truss 48-51mm in diameter. Features three couplers – two couplers with a 5.5in (14cm) long 2in pipe, and the other coupler with a camera mounting plate which allows for greater flexibility in positioning the camera. Perfect for mounting on a pipe boom rig or truss for overhead filming. Constructed from lightweight and solid aluminum alloy.
Features
- Designed for mounting a camera on a pipe or truss 48-51mm in diameter.
- Perfect for mounting on a pipe boom rig or truss for overhead filming
- Features three couplers - two couplers with a 5.5in (14cm) long 2in wide pipe, and the other coupler with a camera mounting plate. This allows for greater flexibility in positioning the camera
- Camera plate features six standard 3/8in holes, spaced every 1in, making it compatible for mounting to most industry-standard cheese plates
- Constructed from lightweight and solid aluminum alloy
Specifications
- Color: Silver
- Material - Primary: Aluminum
- Product Height: 2.36in / 6.0cm
- Product Length: 9.84in / 25.0cm
- Product Width: 5.51in / 14.0cm
- Product Weight: 1.76lb / 0.8kg
- Maximum Jaw Diameter: 2.01in / 51.0mm
- Minimum Jaw Diameter: 1.89in / 48.0mm
- Stand Adapter Type: Camera Plate with 3/8in female
Kupo 3/8 Feet Feet-16 Threaded Mounting Plate with Baby 5/8 Feet Feet (16mm) Stud KG002312
$ 20.19
This round flat plate allows you to mount your tripod head or any other accessory tapped with a female 3/8"-16 thread to a Convi Clamp or any piece of grip equipment that has a baby receiver.
Kupo 3/8-Inch-16 F to 1/4-Inch-20 M Adapter, KG003912
$ 5.39
The KG003912 is a small adapter that converts a 3/8-16 male thread to a 1/4-20 male thread. The KG003912 is made from brass.
Kupo 4 Way Clamp, for 1.4-2.0-Inch (35 to 50mm) Tube, KG900712
$ 54.95 - Vendido
The 4 Way Clamp is another ingenious Kupo innovation. This all metal cast aluminum clamp features a unique spring locking mechanism that allows you to instantly latch and release the locking collar around any tubing sized from 1.4 -2.0 (35 -50mm) in diameter. Just a quick turn of the tension handle to secure it in place and your ready to mount any light fixture or accessory up to 66 lbs (30 Kg) to light stands, scaffolds or Kupoles in a snap! The 4 Way Clamp has four recessed mounting locations distributed in 90 degree increments to accept a series of interchangeable accessories.
Kupo 4" Super Visor End Jaw KG602912
$ 55.95 - Vendido
Kupo 4" Super Visor End Jaw KG602912
Kupo 4-1/2-Inch Grip Head with 1-1/8-Inch Stud and Receiver, KG400512
$ 69.95
The 4-1/2 Grip Head, KG400512 consists of a pair of rotating aluminum discs attached to a junior 1-1/8 (28mm) stud and receiver. The discs have two different sized V shaped jaws to accept any accessory with a 5/8 or 3/8 mounting stud or tubing. The V shaped jaws have teeth that grab whatever is mounted between the plates securely. The KG400512 uses a non-slip aluminum friction disc that will maintain its durability over time that offers the user positive locking strength and precise control. The cine industry also refers to it as a lollipop. When you need to crank down on a large overhead frame to hold it in place, this is the grip head for the job. The KG400512 is designed to convert a junior stand with a combo head into an overhead stand.
Kupo 4-Inch (10cm) Super Viser Clamp with Hex Receiver - End Jaw, KG601512 (NLA)
$ 50.00
The Super Viser is an extremely strong and versatile clamp. It can mount securely onto round and square objects, or just about any unique shape up to 4 (11cm) in diameter. The jaw position remains fixed on one side of the clamp, enabling it to be mounted where limited space is available. The specially formulated grip pad provides a strong grip, yet protects the surface it's clamped around. Another Kupo innovation outfits this clamp with a hexagonal receiver that accepts the full compliment of Convi Clamp accessories. The Super Viser boasts an impressive load capacity of 66.1 lbs (30 Kg) and comes in a silver aluminum finish.
Kupo 40" Master C-Stand with Sliding Leg - Black
$ 149.95
Century Stands or more commonly known as, "C" Stands, have been the most common type of grip equipment used by the filmmaking industry for decades due to their strength and flexibility. Used on its own or in combination with a grip head and grip arm, the C-Stand is used for mounting lighting equipment and a whole variety of light shaping tools and accessories. The Kupo Master C-Stand with Sliding Base has two legs that are spring loaded to open in fixed positions, while the third leg is height adjustable by loosening a locking knob and sliding it up and down the main riser section. This enables the user to raise one leg higher than the others to level out the stand on an incline or uneven terrain. It comes in really handy on some stairs! C-Stands get their sizing from the length of their riser sections. This 40" double riser stand has two telescoping risers and one main section for a total of 120". Add the height of the base and you arrive at your maximum height All Century Stands feature a unique base specially designed with three varied leg heights. This enables the user to stack or "nest" the stand bases so that the risers are just inches apart from one another for use in close proximity mounting of lights and other grip equipment or easy storage. The Master C-Stand features a zinc alloy casting on its base that's five times stronger than aluminum to sustain the weight of heavy sandbags and people standing on it The aluminum casted locking collars are outfitted with a stainless steel heli-coil that protects the aluminum from being damaged by the knob's stainless steel bolt for strength and durability.
Kupo 40" Master C-Stand with Sliding Leg - Silver
$ 149.95
Century Stands or more commonly known as, "C" Stands, have been the most common type of grip equipment used by the filmmaking industry for decades due to their strength and flexibility. Used on its own or in combination with a grip head and grip arm, the C-Stand is used for mounting lighting equipment and a whole variety of light shaping tools and accessories. The Kupo Master C-Stand with Sliding Base has two legs that are spring loaded to open in fixed positions, while the third leg is height adjustable by loosening a locking knob and sliding it up and down the main riser section. This enables the user to raise one leg higher than the others to level out the stand on an incline or uneven terrain. It comes in really handy on some stairs! C-Stands get their sizing from the length of their riser sections. This 40" double riser stand has two telescoping risers and one main section for a total of 120". Add the height of the base and you arrive at your maximum height All Century Stands feature a unique base specially designed with three varied leg heights. This enables the user to stack or "nest" the stand bases so that the risers are just inches apart from one another for use in close proximity mounting of lights and other grip equipment or easy storage. The Master C-Stand features a zinc alloy casting on its base that's five times stronger than aluminum to sustain the weight of heavy sandbags and people standing on it The aluminum casted locking collars are outfitted with a stainless steel heli-coil that protects the aluminum from being damaged by the knob's stainless steel bolt for strength and durability.
Kupo 40" Master C-Stand with Turtle Base - Black
$ 169.95
Century Stands or more commonly known as, "C" Stands, have been the most common type of grip equipment used by the filmmaking industry for decades due to their strength and flexibility. Used on its own or in combination with a grip head and grip arm, the C-Stand is used for mounting lighting equipment and a whole variety of light shaping tools and accessories. The Kupo Master C-Stand with Turtle Base features a unique innovation in the world of C-Stands that enables the still or moving image-maker of any skill level to open and collapse the legs of the base in under two seconds! The Master C-Stand is outfitted with a patented spring ring locking system that removes all tension from the legs so that gravity can do the work for you. A "turtle base" is an industry term where the riser section can be quickly removed from the base for easy transportation and the base can be used with a stand adapter for a low mounting position.C-Stands get their sizing from the length of their riser sections. This 40" double riser stand has two telescoping risers and one main section for a total of 120". Add the height of the base and you arrive at your maximum height All Century Stands feature a unique base specially designed with three varied leg heights. This enables the user to stack or "nest" the stand bases so that the risers are just inches apart from one another for use in close proximity mounting of lights and other grip equipment and easy storage. The Master C-Stand features a zinc alloy casting on its base that's five times stronger than aluminum to sustain the weight of heavy sandbags and people standing on it. The hollow junior pin receiver allows debris to pass through for easier cleaning and maintenance. The aluminum casted locking collars are outfitted with a stainless steel heli-coil that protects the aluminum from being damaged by the knob's stainless steel bolt for strength and durability.
Kupo 40" Master C-Stand with Turtle Base - Silver
$ 169.95
Century Stands or more commonly known as, "C" Stands, have been the most common type of grip equipment used by the filmmaking industry for decades due to their strength and flexibility. Used on its own or in combination with a grip head and grip arm, the C-Stand is used for mounting lighting equipment and a whole variety of light shaping tools and accessories. The Kupo Master C-Stand with Turtle Base features a unique innovation in the world of C-Stands that enables the still or moving image-maker of any skill level to open and collapse the legs of the base in under two seconds! The Master C-Stand is outfitted with a patented spring ring locking system that removes all tension from the legs so that gravity can do the work for you. A "turtle base" is an industry term where the riser section can be quickly removed from the base for easy transportation and the base can be used with a stand adapter for a low mounting position.C-Stands get their sizing from the length of their riser sections. This 40" double riser stand has two telescoping risers and one main section for a total of 120". Add the height of the base and you arrive at your maximum height All Century Stands feature a unique base specially designed with three varied leg heights. This enables the user to stack or "nest" the stand bases so that the risers are just inches apart from one another for use in close proximity mounting of lights and other grip equipment and easy storage. The Master C-Stand features a zinc alloy casting on its base that's five times stronger than aluminum to sustain the weight of heavy sandbags and people standing on it. The hollow junior pin receiver allows debris to pass through for easier cleaning and maintenance. The aluminum casted locking collars are outfitted with a stainless steel heli-coil that protects the aluminum from being damaged by the knob's stainless steel bolt for strength and durability.
Kupo 40" Sliding Leg Kit (Stand, 2.5" Grip Head & 40" Grip Arm with Hex Stud) - Black
$ 211.95
Century Stands or more commonly known as, "C" Stands, have been the most common type of grip equipment used by the filmmaking industry for decades due to their strength and flexibility. Used on its own or in combination with a grip head and grip arm, the C-Stand is used for mounting lighting equipment and a whole variety of light shaping tools and accessories. The Kupo Master C-Stand with Sliding Base has two legs that are spring loaded to open in fixed positions, while the third leg is height adjustable by loosening a locking knob and sliding it up and down the main riser section. This enables the user to raise one leg higher than the others to level out the stand on an incline or uneven terrain. It comes in really handy on some stairs! C-Stands get their sizing from the length of their riser sections. This 40" double riser stand has two telescoping risers and one main section for a total of 120". Add the height of the base and you arrive at your maximum height All Century Stands feature a unique base specially designed with three varied leg heights. This enables the user to stack or "nest" the stand bases so that the risers are just inches apart from one another for use in close proximity mounting of lights and other grip equipment or easy storage. The Master C-Stand features a zinc alloy casting on its base that's five times stronger than aluminum to sustain the weight of heavy sandbags and people standing on it The aluminum casted locking collars are outfitted with a stainless steel heli-coil that protects the aluminum from being damaged by the knob's stainless steel bolt for strength and durability.
Kupo 40" Sliding Leg Kit (Stand, 2.5" Grip Head & 40" Grip Arm with Hex Stud) - Silver
$ 211.95
Century Stands or more commonly known as, "C" Stands, have been the most common type of grip equipment used by the filmmaking industry for decades due to their strength and flexibility. Used on its own or in combination with a grip head and grip arm, the C-Stand is used for mounting lighting equipment and a whole variety of light shaping tools and accessories. The Kupo Master C-Stand with Sliding Base has two legs that are spring loaded to open in fixed positions, while the third leg is height adjustable by loosening a locking knob and sliding it up and down the main riser section. This enables the user to raise one leg higher than the others to level out the stand on an incline or uneven terrain. It comes in really handy on some stairs! C-Stands get their sizing from the length of their riser sections. This 40" double riser stand has two telescoping risers and one main section for a total of 120". Add the height of the base and you arrive at your maximum height All Century Stands feature a unique base specially designed with three varied leg heights. This enables the user to stack or "nest" the stand bases so that the risers are just inches apart from one another for use in close proximity mounting of lights and other grip equipment or easy storage. The Master C-Stand features a zinc alloy casting on its base that's five times stronger than aluminum to sustain the weight of heavy sandbags and people standing on it The aluminum casted locking collars are outfitted with a stainless steel heli-coil that protects the aluminum from being damaged by the knob's stainless steel bolt for strength and durability.
Kupo 40" Turtle Base Kit (Stand, 2.5" Grip Head & 40" Grip Arm with Hex Stud) - Black
$ 236.95
Century Stands or more commonly known as, "C" Stands, have been the most common type of grip equipment used by the filmmaking industry for decades due to their strength and flexibility. Used on its own or in combination with a grip head and grip arm, the C-Stand is used for mounting lighting equipment and a whole variety of light shaping tools and accessories. The Kupo Master C-Stand with Turtle Base features a unique innovation in the world of C-Stands that enables the still or moving image-maker of any skill level to open and collapse the legs of the base in under two seconds! The Master C-Stand is outfitted with a patented spring ring locking system that removes all tension from the legs so that gravity can do the work for you. A "turtle base" is an industry term where the riser section can be quickly removed from the base for easy transportation and the base can be used with a stand adapter for a low mounting position.C-Stands get their sizing from the length of their riser sections. This 40" double riser stand has two telescoping risers and one main section for a total of 120". Add the height of the base and you arrive at your maximum height All Century Stands feature a unique base specially designed with three varied leg heights. This enables the user to stack or "nest" the stand bases so that the risers are just inches apart from one another for use in close proximity mounting of lights and other grip equipment and easy storage. The Master C-Stand features a zinc alloy casting on its base that's five times stronger than aluminum to sustain the weight of heavy sandbags and people standing on it. The hollow junior pin receiver allows debris to pass through for easier cleaning and maintenance. The aluminum casted locking collars are outfitted with a stainless steel heli-coil that protects the aluminum from being damaged by the knob's stainless steel bolt for strength and durability.
Kupo 40" Turtle Base Kit (Stand, 2.5" Grip Head & 40" Grip Arm with Hex Stud) - Silver
$ 236.95
Century Stands or more commonly known as, "C" Stands, have been the most common type of grip equipment used by the filmmaking industry for decades due to their strength and flexibility. Used on its own or in combination with a grip head and grip arm, the C-Stand is used for mounting lighting equipment and a whole variety of light shaping tools and accessories. The Kupo Master C-Stand with Turtle Base features a unique innovation in the world of C-Stands that enables the still or moving image-maker of any skill level to open and collapse the legs of the base in under two seconds! The Master C-Stand is outfitted with a patented spring ring locking system that removes all tension from the legs so that gravity can do the work for you. A "turtle base" is an industry term where the riser section can be quickly removed from the base for easy transportation and the base can be used with a stand adapter for a low mounting position.C-Stands get their sizing from the length of their riser sections. This 40" double riser stand has two telescoping risers and one main section for a total of 120". Add the height of the base and you arrive at your maximum height All Century Stands feature a unique base specially designed with three varied leg heights. This enables the user to stack or "nest" the stand bases so that the risers are just inches apart from one another for use in close proximity mounting of lights and other grip equipment and easy storage. The Master C-Stand features a zinc alloy casting on its base that's five times stronger than aluminum to sustain the weight of heavy sandbags and people standing on it. The hollow junior pin receiver allows debris to pass through for easier cleaning and maintenance. The aluminum casted locking collars are outfitted with a stainless steel heli-coil that protects the aluminum from being damaged by the knob's stainless steel bolt for strength and durability.
Kupo 40-Inch Extension Grip Arm with Big Handle
$ 44.95
Kupo 40-Inch Extension Grip Arm with Big Handle
Kupo 40-Inch Extension Grip Arm with Big Handle - Silver, KG203412
$ 44.95
Kupo 40-Inch Extension Grip Arm with Big Handle - Silver, KG203412
Kupo 40-Inch Hex Grip Arm with Big Handle
$ 53.95
Kupo 40-Inch Hex Grip Arm with Big Handle
Kupo 5/8 Inches (16mm) Receiver
$ 12.95
Kupo 5/8 Inches (16mm) Receiver
Kupo 5/8 Inches (16mm) Receiver with 3/8 Inches-16 Thread KG004611
$ 12.95
Kupo 5/8 Inches (16mm) Receiver with 3/8 Inches-16 Thread KG004611
Kupo 6 Inches (15cm) Chain Clamp with Dual Baby, 5/8 Inches (16mm) Studs KG600412
$ 69.95
This clamp consists of a locking pair of pliers with a 6" length of chain that can be wrapped around odd shaped objects such as a tree branch.
Kupo 6" Pump Cup with 3/8"
$ 62.95 - Vendido
Kupo 6" Pump Cup with 3/8"
Kupo SKU: KG088611 | Helix SKU: KUKG088611
Overview
Kupo’s new range of pumping suction cups offers a temporary solid light mounting solution on smooth, nonporous surfaces. Each Kupo Suction Cup comes with 5/8" baby pin; 3/8" thread bolt or 3/8" thread socket. This permits mounting small lights; cameras and accessories to windows, mirrors, automobiles, boats and any other smooth, nonporous surfaces. Because of the excellent rubber material with silicon, Kupo Suction Cups can be used at temperatures from -12°- 49° C/10.4°- 120°F. A red-line indicator is equipped in most suction cups warning of any vacuum loss due to adverse shooting conditions.
6" pumping suction cup with 3/8” -16 thread x 5/8” length stud for use with ball head camera mounts.( Supplied with pad protector)
| Weight | 0.45 KG (1 lbs) |
|---|---|
| Maximum Load | 32 KG (70 lbs) |
Kupo 6" Pump Cup with 5/8" Baby Pin KG083711
$ 74.95 - Vendido
Kupo 6" Pump Cup with 5/8" Baby Pin KG083711
Kupo 6" Pump Cup with 5/8" Baby Receiver KG088211
$ 91.95 - Vendido
Kupo 6" Pump Cup with 5/8" Baby Receiver KG088211
Kupo 6" Pump Cup with 5/8" Swivel Baby Pin KG083911
$ 144.95 - Vendido
Kupo 6" Pump Cup with 5/8" Swivel Baby Pin KG083911
Kupo 6" Pump Cup with 5/8" Swivel Baby Recceiver KG088111
$ 106.95 - Vendido
Kupo 6" Pump Cup with 5/8" Swivel Baby Recceiver KG088111
Kupo 6" Pump Cup with Det. 5/8" Swiveling Adapter KG083811
$ 145.95 - Vendido
Kupo 6" Pump Cup with Det. 5/8" Swiveling Adapter KG083811
Kupo 6" Suction Cup With Swivel Coupler For 2" Pipe
$ 265.95
Kupo 6" Suction Cup With Swivel Coupler For 2" Pipe
Mfr SKU: KG079512 | Helix SKU: KUKG079512
Overview:
Features:
- Can support up to 44lbs (20kg). 6" suction cup comes with a swivel coupler for 2" tube primary designed for vehicle rigging and offers a temporary mounting solution on a car
- The suction cup can be used at temperatures from -12 degree to 49 degrees
- Red indicator on the suction cup warns of any vacuum loss
- Features a steel ball
- The T handle on the coupler allows to tighten easily and coneniently
Specifications:
- Color: Black and Silver
- Material - Primary: Aluminum
- Material - Secondary: Rubber
- Material - Tertiary: Silicon
- Product Height: 4.92in / 12.5cm
- Product Length: 6.5in / 16.5cm
- Product Width: 5.51in / 14.0cm
- Product Weight: 3.5lb / 1.59kg
- Maximum Payload Capacity: 44.05lb / 20.0kg
- Maximum Jaw Diameter: 2.01in / 51.0mm
- Minimum Jaw Diameter: 1.89in / 48.0mm
- Stand Adapter Type: 2in Coupler
Kupo 7' Click Stand Black KS041611
$ 83.95 - Vendido
Kupo 7' Click Stand Black KS041611
Kupo 75cm long PVC Coated Safety Wire - 3.5mm Diameter, KG060912
$ 10.69
Safety cables are recommended when supporting lights, cameras or accessories from the ceiling in case they unexpectedly come loose from where they are mounted. The KG060912 is a lightweight stainless steel cable coated with PVC. It is 29.52 (75cm) long, and has a diameter of 0.13 (3.5mm) with a load rating of 22lbs (10Kg). The KG060912 comes equipped with a carabiner closure.
Kupo 8' Click Stand Black KS041711
$ 88.95 - Vendido
Kupo 8' Click Stand Black KS041711
Kupo 80mm Caster with Brake, 22mm Round Adapter, Set of Three, KS940322
$ 63.95
Kupo 80mm Caster with Brake, 22mm Round Adapter, Set of Three, KS940322
Kupo 80mm Caster with Brake, 22mm Square Adapter, Set of Three, KS940422
$ 64.95
Kupo 80mm Caster with Brake, 22mm Square Adapter, Set of Three, KS940422
Kupo 9" Super Visor End Jaw KG603012
$ 78.95 - Vendido
Kupo 9" Super Visor End Jaw KG603012
Kupo 9-Inch Super Viser Clamp with Hex Receiver, End Jaw (KG600212)
$ 65.00
Kupo 9-Inch Super Viser Clamp with Hex Receiver, End Jaw (KG600212)
Kupo 9-Inch Super Viser Clamp with Hex Receiver, End Jaw (KG600212) Default
$ 65.00 - Vendido
Kupo 9-Inch Super Viser Clamp with Hex Receiver, End Jaw (KG600212) Default
Kupo Adapter, Junior to Baby, 1-1/8-Inch Stud to 5/8-Inch Stud, KG006312
$ 20.19
Kupo Adapter, Junior to Baby, 1-1/8-Inch Stud to 5/8-Inch Stud, KG006312
Kupo Adapter, Junior to Baby, 1-1/8-Inch Stud to 5/8-Inch Stud, KG006312 Default
$ 15.00 - Vendido
Kupo Adapter, Junior to Baby, 1-1/8-Inch Stud to 5/8-Inch Stud, KG006312 Default
Kupo Adjustable Gaffer Grip, KG500611
$ 41.95
Kupo Adjustable Gaffer Grip, KG500611
Kupo Adjustable Gaffer Grip, KG500611 Default
$ 34.00 - Vendido
Kupo Adjustable Gaffer Grip, KG500611 Default
Kupo Alli Clamp - Black, KG302011
$ 19.95
Kupo Alli Clamp - Black, KG302011
Kupo Alli Clamp - Silver, KG302412
$ 19.95
Kupo Alli Clamp - Silver, KG302412
Kupo Aluminum Core for Seamless - 9 Feet (2.75m) KG084312
$ 56.95
Kupo Aluminum Core for Seamless - 9 Feet (2.75m) KG084312
Kupo Aluminum Core for Seamless - 9 Feet (2.75m) KG084312 Default
$ 41.75 - Vendido
Kupo Aluminum Core for Seamless - 9 Feet (2.75m) KG084312 Default
Kupo Apple Box - Full - 20"x12"x8"
$ 49.95 - Vendido
Kupo Apple Box - Full - 20"x12"x8"
Kupo SKU: KG087311 | Helix SKU: KUKG087311
Overview
The wooden apple box is one of the most useful pieces of grip equipment you'll find on set. They are the ultimate multi-taskers, used for leveling dolly track, giving short people a boost, a quick stool for a weary grip, a workbench, a mounting platform, etc. They come in four standard sizes that are fractions of a standard full apple box which is 20" x 12" x 8". Two halves make a full, four quarters make a full and eight pancakes make a full.
Kupo's Apple Boxes are made from high quality nine ply Baltic Birch. Central bracing for increased strength and durability and rounded edges that are easy on the hands. Natural Finish.
*Full Apple Box only.
Specifications
20" x 12" x 8"
Kupo Apple Box - Half - 20"x12"x4"
$ 42.95
Kupo Apple Box - Half - 20"x12"x4"
Kupo SKU: KG087211 | Helix SKU: KUKG087211
Overview
The wooden apple box is one of the most useful pieces of grip equipment you'll find on set. They are the ultimate multi-taskers, used for leveling dolly track, giving short people a boost, a quick stool for a weary grip, a workbench, a mounting platform, etc. They come in four standard sizes that are fractions of a standard full apple box which is 20" x 12" x 8". Two halves make a full, four quarters make a full and eight pancakes make a full.
Kupo's Apple Boxes are made from high quality nine ply Baltic Birch. Central bracing for increased strength and durability and rounded edges that are easy on the hands. Natural Finish.
Specifications
The half apple box measures 20" x 12" x 4".
Kupo Apple Box - Pancake - 20"x12"x1"
$ 26.95
Kupo Apple Box - Pancake - 20"x12"x1"
Kupo SKU: KG087011 | Helix SKU: KUKG087011
Overview
The wooden apple box is one of the most useful pieces of grip equipment you'll find on set. They are the ultimate multi-taskers, used for leveling dolly track, giving short people a boost, a quick stool for a weary grip, a workbench, a mounting platform, etc. They come in four standard sizes that are fractions of a standard full apple box which is 20" x 12" x 8". Two halves make a full, four quarters make a full and eight pancakes make a full.
Kupo's Apple Boxes are made from high quality nine ply Baltic Birch. Central bracing for increased strength and durability and rounded edges that are easy on the hands. Natural Finish.
The pancake, technically an eighth apple box, measures 20" x 12" x 1". When every inch counts, the pancake is there to lend a hand.
