Kupo Large Gaffer Grip, KG500511
$ 72.95
The Gaffer Grips are quick mount, multi-purpose clamps that will grab on most surfaces flat or round. They reinvent the standard spring clamp by adding strength and versatility. The Large Gaffer Grip is outfitted with a variable tension control knob and comes with a long removable baby 5/8 (16mm) pin mounted in a female baby 5/8 (16mm) receiver. If you're looking for a rapid, down and dirty way to mount a lighting fixture, the Gaffer Grips are always willing and able. The KG500511 jaws can be adjusted from 1/4 to 3-1/8 (0.63-7.93cm) and is clad in a stealthy black finish.
Kupo Low Mighty Baby Stand KS101212
$ 143.95
If you need to support a heavy fixture low to the ground, this small stainless steel brute will handle the load.
Kupo Low Mighty Stand, KS300312
$ 249.95
The KS300312 Low Mighty Stand offers you superior strength without excess height. When you need to position a heavy piece of gear weighing up to 77.2 lbs (35 Kg), anywhere between 36.2 - 80.7 in height (92 - 205cm), this little brute will get the job done. The KS300312 also features the triple function universal combo head with both 1-1/8 (28mm) and 5/8 (16mm) receivers plus a multi-direction 5/8 (16mm) stud to accept any kind of mounting challenge. The KS300312 features a leveling leg that enables the user to extend one leg more than the others to level out the stand on an incline or uneven terrain. It also comes in handy on some stairs! These stands would be ideal for low mounting position for a large Fresnel or an extra support on the bottom bar of a butterfly frame.
Kupo Master Cine Stand, KS500112
$ 265.95 - Vendido
The KS500112 Master Cine Stand gives you the ultimate combination of strength and features. The solid steel construction has a maximum load capacity of 88.2 lbs (40 Kg) The KS500112 also features the triple function universal combo head with both 1-1/8 (28mm) and 5/8 (16mm) receivers plus a multi-direction 5/8 (16mm) stud to accept any kind of mounting challenge. The KS500112 also has a leveling leg. A leveling leg is a feature that enables the user to extend one leg more than the others to level out the stand on an incline or uneven terrain. It also comes in handy on some stairs! Whether you are mounting a boom, large HMI or a green screen, this cine stand can support just about anything 128 (3.25m) high above the ground.
Kupo Master Combo Alu Senior Stand, KS200511
$ 160.95
The Master Combo Alu Senior has all the features you'd expect in a combo stand but in a lighter weight aluminum package. The KS200511 only weighs in at 6.6 lbs (3 Kg) and gives you the flexibility of the triple function universal combo head with both 1-1/8 (28mm) and 5/8 (16mm) receivers plus a multi-direction 5/8 (16mm) stud. The KS200511 also features a leveling leg that enables the user to extend one leg more than the others to level out the stand on an incline or uneven terrain. It also comes in handy on some stairs! When it comes to function being a featherweight, the Master Combo Alu Senior is a great choice.
Kupo Master Combo HD Stand, KS200112
$ 219.95
The KS200112 Master Combo HD Stand is a chrome plated steel combo stand with a load capacity of 88.2 lbs (40 Kg). Combo stands get their name because of their unique head design. The KS200112 features the triple function universal combo head with both 1-1/8 (28mm) and 5/8 (16mm) receivers plus a multi-direction 5/8 (16mm) stud, giving you great versatility when it comes to mounting options. The features a leveling leg that enables the user to extend one leg more than the others to level out the stand on an incline or uneven terrain. It also comes in handy on some stairs! Each riser is spring cushioned as a safety feature to protect lighting fixtures from a sudden drop if the locking collar becomes loose. When it comes to strength and flexibility the KS200112 has no equal.
Kupo Master High Cine Stand, KS500412
$ 276.95
The big brother of the KS500112 Master Cine Stand, the KS500412 Master Cine Stand gives you the ultimate combination of strength and features. The solid steel construction has a maximum load capacity of 88.2 lbs (40 Kg) The KS500412 also features the triple function universal combo head with both 1-1/8 (28mm) and 5/8 (16mm) receivers plus a multi-direction 5/8 (16mm) stud to accept any kind of mounting challenge. The KS500412 features a leveling leg that enables the user to extend one leg more than the others to level out the stand on an incline or uneven terrain. It also comes in handy on some stairs! Whether you are mounting a boom, large HMI or a green screen, this cine stand can support just about anything high above the ground. Due to the increased height, this light stand features a slightly larger footprint diameter and weighs just 2.2 lbs (1 Kg) more.
Kupo Max Arm with Hand Wheel KG100911
$ 102.95
The Max Arm with Hand Wheel is identical to the Max Arm with Adjustable Handle (KG100211) except it has a big hand wheel to adjust the tension as opposed to the ratcheted handle.
Kupo Max Arm, KG100211
$ 102.95
The Max arm is specially designed for lighting, video, film and photography. It's an adjustable arm that allows you to position a camera, lighting fixture or accessory in any position within seconds! The two 5/8 (16mm) studs at either end are attached to ball joints rotate 360 degrees, plus a cut-out in the sleeve surrounding the joint allows the stud to be bent at a 90 degree angle. One stud is tapped to receive a 3/8 -16 thread, while the other is tapped to receive 1/4 - 20 thread. Each stud has six milled flat surfaces, so whatever you mount on the Max Arm will not rotate. The central elbow rotates 360 degrees for infinite adjustability. The Max Arm is equipped with user-replaceable special friction discs with anti-slip rosettes prevent unwanted movement. The adjustable ratcheted handle slowly increases tension until all three joints lock at once making precise positioning a breeze.
Kupo Mini Flex Arm with Alligator Clip, KD700912
$ 28.95
The KD700912 is a mini flex arm with a 3/8-16 female thread inside a baby 5/8 (16mm) adapter on one side and an alligator clip on the other. It's the perfect accessory to hold small items such as a mini flag or reflector. The KD700912 is 11.4 (29mm) in length.
Kupo Mitchell Round Mounting Plate With 1-1/8In (28Mm) Junior Receiver
$ 118.95
Kupo Mitchell Round Mounting Plate With 1-1/8In (28Mm) Junior Receiver
Mfr SKU: KG009012 | Helix SKU: KUKG009012
Overview:
Chrome plated steel adapter, the Mitchell round plate allows for attachment to a Mitchell threaded collar for a 1-1/8in (28mm) junior receiver.
Features:
- Chrome plated steel
- Mitchell round plate allows for attachment to a Mitchell threaded collar for a 1-1/8in (28mm) junior receiver
- The 28mm junior receiver is welded onto a round plate, which enhances the strength
- Mitchell Castle Nut is included
- Mitchell Castle Nut comes with four stainless steel spacers and are 1in length, which can lock easily by hand or wrench
Specifications:
- Color: Silver
- Material - Primary: Steel
- Product Height: 6.57in / 16.7cm
- Product Length: 5.28in / 13.4cm
- Product Width: 5.28in / 13.4cm
- Product Weight: 5.33lb / 2.42kg
- Riser 1 Diameter: 0.98in / 25.0mm
- Riser 2 Diameter: 1.18in / 30.0mm
- Riser 3 Diameter: 1.38in / 35.0mm
- Sections: 3
- Stand Adapter Type: Mitchell to 28mm Receiver
- Leg Diameter: 1.02in / 26.0mm
- Risers: 2
- Riser 4 Diameter: 0.0in / 0.0mm
- Riser 5 Diameter: 0.0in / 0.0mm
Kupo Off Camera Flash Alli Clamp KG302511
$ 69.95
This incredibly handy accessory consists of an Alli Clamp with a mini ball head and hot shoe enabling the user to mount and position an on-camera flash virtually anywhere in seconds!
Kupo Owl Cable Clips, 4 Pack
$ 5.39
Kupo Owl Cable Clips, 4 Pack
Kupo Paper Background Drive Chain Weight, Black KG084811
$ 8.19
This is a replacement Chain Weight for the Background Paper Drive Set (KG084411).
Kupo Paper Drive Baby Stand Adapter KG084911
$ 41.95
This is a pair of adapters designed to hold a Background Paper Drive Set (KG084411) outfitted with baby 5/8" (16mm) receiver to be mounted on any light stand or accessory with a baby pin.
Kupo Petite Clamp for Baby for 5/8 Inches (16mm) Tubing KG600712
$ 26.95
The Petite Clamp uses accessories from the 3 &; 4 Way Clamp system and allows you to mount them easily onto any grip arm or 5/8" (16mm) tubing
Kupo Photo Baby Boom - Black Aluminum, KG601711
$ 110.95
A boom is an essential tool for positioning a light fixture either directly above the photographer, videographer or cinematographer to create a beautiful flat light, or positioned above the subject acting as a hair light. This lightweight aluminum all-metal construction features an ear that is designed to fit between the plates of a grip head. It features a built in hook at the tail end for adding sandbags for counter-weight. This boom extends from 3.8 -7.8' (1.1 -2.4m) and will support 6.6 lbs (3 Kg) when fully extended. The Aluminum Baby Boom comes in a stealthy black finish.
Kupo Pincer Clamp with 3/8-Inch-16F & 1/4-Inch-20F, KG702711
$ 25.00
The Pincer Clamp is a mini version of the Convi Clamp that's super lightweight and compact only weighing 4.58 oz (130 g). The specially formulated pads that line the jaws provide a strong grip on round and rectangular shapes. The Pincer Clamp is tapped with both 1/4'' and 3/8'' threads, ideal for mounting all cameras, lights, monitors and accessories weighing up to 11 lbs (5 Kg).
Kupo Plastic Background Drive Set Chain KG084711
$ 17.95
This is a replacement plastic chain for the Background Paper Drive Set (KG084411).
Kupo Round Stud with 3/8 Inches-16 F and 1/4 Inches
$ 5.29
Kupo Round Stud with 3/8 Inches-16 F and 1/4 Inches
Kupo Runway Stand Base KS301012
$ 110.95
This base with braked wheels features a junior (1-1/8" - 28mm) receiver and the legs fold parallel to one another for easy transport and storage. Perfect for taking your Master C Stand riser columns mobile.
Kupo Scraper with Baby 5/8-Inch (16mm) Stud, KG003812
$ 17.00
The Scraper is stiff bladed putty knife with a built in baby 5/8 (16mm) stud. The 0.04 (1.1mm) thin metal blade is designed for jamming into the gap between a door and its frame, placed under a stack of books or between two books on a shelf, clamped to a ladder step, etc. The baby 5/8 (16mm) stud has a safety indentation for securely hanging small lighting fixtures. There are three holes drilled into the blade designed as anchor points for mounting by screws or nails.
Kupo Shelf Support "L" Bracket, Black (Set of Two) KD703611
$ 20.19
These Convi Clamp accessories are right angle brackets with a hex stud mounted to one side. They are perfect for mounting flat objects such as a piece of wood or glass to a pair of Kupoles to be used as a table to support items for photography, to be used as a shelf to store items or an elegant display in a home or retail environment.
Kupo Single Hook Set for Background Paper Drive KG084511
$ 23.95
This set of hooks is designed to be used with a pair of Convi Clamps and a Background Paper Drive Set to support one roll of seamless paper.
Kupo Square J Hook - Black KD703811
$ 15.95
This Convi Clamp accessory is similar to the Hex "J" Hook, however the bottom part of the "J" is squared off instead of rounded and it's narrow design holds thinner objects. The Square "J" Hooks are perfect for vertically suspending a mirror, piece of wood or anything that is flat and narrow with some Convi Clamps.
Kupo Steel Combo Stand Extension, KS100112
$ 144.95
The KS100112 Steel Combo Stand Extension is a single section, double riser chrome plated stand extension with a Triple Function Universal Head with 1-1/8 (28mm) and 5/8 (16mm) Receivers with a Multi-Direction 5/8 (16mm) Stud. The bottom of the riser section terminates with a junior 1-1/8 (28mm) stud that will fit into a Master C Stand Base, Runway Base or any piece of gear with a junior 1-1/8 (28mm) receiver. With the riser extended, the overall height is 82.6 (2.10m).
Kupo Swivel Extension Arm, Hex Stud to 5/8-Inch (16mm) Receiver, KG001712
$ 35.95
The KG001712 is a mini extension arm with a hexagonal stud on one side, designed for the Convi and Super Viser clamps, and a baby 5/8 (16mm) receiver on the other. It has a double ball elbow joint giving you the ability to articulate the two sides in any direction.
Kupo Tilting Umbrella Adapter with KG000912 & KG001112 Studs KG007012
$ 42.95
This adapter enables you to use an umbrella with light fixtures that don't have a place to accept an umbrella shaft.
Kupo Tiny Clamp with 1/4 Inches-20 M KG300912
$ 14.95
This little clamp is a grip arm's best friend! It consists of a 1/4"-20 male thread on one side and a small receiver to accept any stud or tubing up to 5/8" (16mm) in diameter. This is the perfect accessory to mount monitors, off camera flashes, etc.
Kupo Triple Hook Set for Background Paper Drive KG084611
$ 56.95
This set of hooks is designed to be mounted on a wall with screws or bolted to a pair of Convi Clamps and three Background Paper Drive Sets to support three rolls of seamless paper.
Kupo TVMP - (TV to Motion Picture) Adapter KG005412
$ 14.95
This solid steel adapter has a junior 1-1/8" (28mm) outer diameter and a baby 5/8" (16mm) interior receiver.
Kupo Universal 5/8-Inch (16mm) Stud, 3/8-Inch-16 M and 1/4-Inch-20 M Threads, KG001212
$ 10.59
The KG001212 is a universal double-sided, baby 5/8 (16mm) stud with 1/4-20 male thread on one side and a 3/8-16 thread on the other. The stud is round and will fit into any 5/8 (16mm) receiver. The KG001212 is the replacement stud for the Kupo light stands KS040111 KS040111. The KG001212 is made from brass.
Kupo Wrap & Go Shot Bag - 10lbs
$ 50.95
Kupo Wrap & Go Shot Bag - 10lbs
Kupo SKU: KG088911 | Helix SKU: KUKG088911
Overview
Kupo Wrap & Go Shot Bag 10lbs for stands and booms. Non-slip strap to wrap around the stand base or boom. Premium shot bag made with black cordex textured nylon and a water resistant polyurethane coating on the inside. 2mm size steel balls are encapsulated into the bag making this bag dense to help weigh down stands and offer counterweight to any boom. Loading weight is noted on the Wrap & Go bags.
Kupo Wrap & Go Shot Bag - 15lbs
$ 55.95
Kupo Wrap & Go Shot Bag - 15lbs
Kupo SKU: KG089011 | Helix SKU: KUKG089011
Overview
Kupo Shot Bag 15 Lbs for light stands and booms. Drapes perfectly over the legs of any light stand. Premium shot bag made with black cordex textured nylon and a water resistant polyurethane coating on the inside. 2mm size steel balls are encapsulated into the bag making this bag dense to help weigh down stands and offer counterweight to any boom. Loading weight is noted on the bag.
Kupo Wrap & Go Shot Bag - 5lbs
$ 42.95
Kupo Wrap & Go Shot Bag - 5lbs
Kupo SKU: KG088811 | Helix SKU: KUKG088811
Overview
Kupo Wrap & Go Shot Bag 5lbs for stands and booms. Non-slip strap to wrap around the stand base or boom. Premium shot bag made with black cordex textured nylon and a water resistant polyurethane coating on the inside. 2mm size steel balls are encapsulated into the bag making this bag dense to help weigh down stands and offer counterweight to any boom. Loading weight is noted on the Wrap & Go bags.
Lastolite Hilite Background 7' X 8' LL LB8878
$ 1,129.95 - Vendido
Lastolite Hilite Background 7' X 8' LL LB8878
Lastolite SKU: LL LB8878 | Helix SKU: LLLB8878
Special Order Item
Overview
The HiLite backgrounds range allows the photographer to work in a way that was extremely difficult to achieve in the past. With the HiLite the photographer can achieve 'High Key' photography on location and in restrictive spaces.
By rear lighting the white background itself there is no longer a need to use a background light behind the subject. Furthermore, because the background is actually illuminated it means the subject can stand virtually right in front of it without casting a shadow.
The HiLite backgrounds also works as a large rear softbox and illuminates the subject as well, meaning you can use just one other flash head to light the subject from the front. What's more, the whole thing is collapsible.
Specifications
Weight: 18.06 lbs
In Bag - Depth: 3.15 in
In Bag - Height: 40.55 in
In Bag - Width: 40.55 in
Open Size: 2.5m x 2.15m (7' x 8')
Depth: 24.41 in
Height: 98.43 in
Width: 84.65 in
Weight - In Bag: 19.89 lbs
Weight: 18.06 lbs
Lastolite Super White Vinyl Cleanable Train 7' x 8'
$ 285.95 - Vendido
Lastolite Super White Vinyl Cleanable Train 7' x 8' - LLLB8879
Lowel I-55 12v 55w Replacement Bulb
$ 1.95
Lowel I-55 12v 55w Replacement Bulb
Lowel SKU: I55 | Helix SKU: LOI55
Overview
Manfrotto 015 1/4-Inch-20 Male 20mm Long to 3/8-Inch Female Adapter - Replaces 3358
$ 7.18 - Vendido
28mm male adapter. This replaces the Manfrotto 3358. Attachment: 1/4'' screw; attachment 2: 3/8" female thread; length: 0.79 in.; material: brass; weight: 0.02 lbs.
Manfrotto 028B Black Aluminum Studio Pro Triman Tripod with Geared Column
$ 447.99 - Vendido
This Bogen Manfrotto Black Aluminum Studio Pro Triman Tripod w/Geared Column is Strong, sturdy and reliable, the Triman tripod is the ideal studio tripod. The geared centre column has a non roll-back feature and has a threaded 3/8” mount on the bottom of the column to allow low angle shots. Twin shank leg design, built-in spirit level and rubber feet with retractable spikes are standard features. The tripod uses a centre column strut design for added stability. Includes a mid level spreader and carrying strap. Ideal for cameras up to medium format.
Manfrotto 035 Super Clamp without Stud - Replaces 2915
$ 36.99 - Vendido
This is an Ideal clamp for many photographic applications. Utilizing an ergonomic lever to securely lock clamping position, it clamps easily and securely. This replaces the Manfrotto 2915. Attachment (bottom): 16mm hexagonal + M5 & 1/4" threads; clamp range - max. (round tube): 2.17 in.; clamp range - min (round tube): 0.51 in.; color: black; load capacity: 33.07 lbs.; material: aluminum; weight: 0.90 lbs.
Manfrotto 035RL Super Clamp with 2908 Standard Stud - Replaces 2900 - Black
$ 35.99 - Vendido
The original Super Clamp that has thousands of uses. No camera bag should be without one. The Super Clamp holds just about everything: cameras, lights, umbrellas, hooks, shelves, plate glass, cross bars, even other Super Clamps! And they hold these items to just about everything: poles, posts, tripod legs, pipes, doors, stands, and beams - virtually any support you can get the Super Clamps wide jaws around. This clamp replaces the Manfrotto 2900.
Manfrotto 037 Camera Stud for Super Clamp 035
$ 9.23 - Vendido
Manfrotto 037 Reversible Short Stud,
Manfrotto 038 Double Super Clamp
$ 75.99 - Vendido
This is a special spigot for the De Sisti & laniro lighting fixture.
Manfrotto 041 L-Bracket Shelf Holders - Replaces 2901 (Set of 2)
$ 20.50 - Vendido
this is a set of two brackets to use in combination with Super Clamp 035 to support shelves, etc. This replaces the Manfrotto 2901. color: black; depth: 1.57 in.; length: 6.69 in.; material: aluminum; weight: 0.64 lbs.
