Ikelite DS161 Strobe & Video Light NiMH Battery (AUSTRALIAN)
$ 949.00 - Épuisé
Ikelite DS161 Strobe & Video Light NiMH Battery (AUSTRALIAN) - IK4061AU
Ikelite DS161 Strobe & Video Light with NiMH Battery (EUROPEAN)
$ 949.00 - Épuisé
Ikelite DS161 Strobe & Video Light with NiMH Battery (EUROPEAN) - IK4061EU
Ikelite DS161 Strobe & Video Light with NiMH Battery (USA)
$ 949.00 - Épuisé
Ikelite DS161 Strobe & Video Light with NiMH Battery (USA) - IK4061US
Ikelite DS161 Strobe Kit with Sync Cord + Arm / NiMH 4061.35
$ 1,399.95 - Épuisé
Ikelite DS161 Strobe Kit with Sync Cord + Arm / NiMH
The DS161 combines power with wide angle coverage to give you the most bang for your buck. This kit provides everything you need to add a strobe to any Ikelite TTL system for Compact Digital, Mirrorless, or DSLR camera.
The quality of light is exceptional due to a round flash tube and custom powder coated reflector designed specifically to deliver the softest, most even coverage possible. Strobes with a straight flashtube may be capable of high powers, but require the addition of a diffuser to spread out their sharp, rectangular beam pattern and reduce the harsh hot spot. The DS161 beam is designed to be perfectly soft and wide spread through its reflector design, and is capable of providing you the coverage and power you want and avoiding the one f/stop loss caused by adding a diffuser.
DS160 and DS161 strobes are legendary for their ability to keep up in rapid firing situations—a cut above any flash on the market. Electrical sync connection and a high-capacity battery pack provide the speed you need to capture fast moving subjects like sharks and sailfish at just the right millisecond.
When combined with a compatible TTL system, the DS161 automatically adjusts brightness to provide perfect exposure whether you're shooting macro, portrait or wide angle. Focus on your camera settings and composition and enjoy the increased number of flashes and even faster recycle time you'll get when working with a TTL system.
Ikelite DS161 STROBE NIMH ( UNITED KINGDOM ) (4061UK)
$ 949.00 - Épuisé
Ikelite DS161 Strobe & Video Light with NiMH Battery (UNITED KINGDOM) - IK4061UK
Ikelite DSLR Ball Mount Kit for Gamma
$ 79.95 - Épuisé
Ikelite DSLR Ball Mount Kit for Gamma - 18871
Based on our popular SA-100 1in (2.5 cm) diameter ball socket arm system, this mount kit includes everything you need to use your Gamma as a focus assist or macro video light. Compatible with Ikelite DSLR housings featuring a top mount. Gamma flashlight not included.
Ikelite DSLR Flex Mount Kit for Gamma
$ 59.95
Ikelite DSLR Flex Mount Kit for Gamma - 18872
This mount kit is super lightweight, flexible, and includes everything you need to use your Gamma as a focus assist or macro video light. Compatible with Ikelite DSLR housings featuring a top mount. Gamma flashlight not included.
Ikelite Dual AF35 Tray with T-Mount
$ 39.95 - Épuisé
Ikelite Dual AF35 Tray with T-Mount - 952345
A dual tray designed to combine the AF35 strobe kit with a secondary lighting accessory.
Ikelite Dual AF35 Tray with T-Mount and Flex Ball
$ 59.95 - Épuisé
Ikelite Dual AF35 Tray with T-Mount and Flex Ball - 952344
A dual tray designed to combine the AF35 strobe kit with a secondary lighting accessory.
Ikelite Fiber Optic 1in Ball Arm Kit
$ 324.95
Ikelite Fiber Optic 1in Ball Arm Kit - 407004
Use this kit to attach any DS strobe to a fiber optic housing system. The Ikelite Fiber Optic Adapter automatically configures itself for compatibility with both pre-flash and non pre-flash camera modes. No setting of small switches or confusion over number of pre-flashes. A universal mount kit is included to add fiber optic ports to almost any clear body housing. Strobe not included.
Ikelite Fiber Optic Coiled Cord
$ 80.00 - Épuisé
Ikelite Fiber Optic Coiled Cord - 4501
Features multi-core fiber optic cable for optimum signal transmission and built-in strain relief. Compatible with Fiber Optic Adapter for DS strobes and any Ikelite housing featuring fiber optic ports. Also compatible with SEA&SEA- and Olympus-type fiber optic connections.
Ikelite Fiber Optic Converter for DS Strobes (3rd Gen)
$ 125.00
Ikelite Fiber Optic Converter for DS Strobes (3rd Gen)
Ikelite SKU: 4401.3 | Helix SKU: 44013
Overview
Converts the electrical bulkhead of any Ikelite DS strobe into a fiber optic port.
Updates
This 3rd Generation of the Fiber Optic Converter features a hard anodized aluminum plug connection which reduces weight without sacrificing durability. It is recommended for use with any Ikelite strobe produced September 2018 or later with a hard anodized aluminum bulkhead.
Like the 2nd Generation model, this Fiber Optic Converter features heightened sensitivity for use with SEA&SEA or Nauticam housings with internal electrical-to-optical flash triggering devices. These devices translate the camera's electrical signals into a series of LED flashes which are much less bright than a traditional built-in camera flash. The Fiber Optic Converter is also compatible with any system where the camera's built-in flash can be seen by a fiber optic cord.
Attachment and Use
The Converter simply attaches to the strobe's electrical bulkhead in place of a sync cord connector. The enlarged slave window provides approximately 90 degrees field of view for remote triggering.
The Fiber Optic Converter automatically configures itself for compatibility with both pre-flash and non pre-flash camera modes. No setting of small switches or confusion over number of pre-flashes. Simply turn on your strobe and take one picture to configure. This adapter is a manual exposure (non-TTL) trigger only. The strobe's output may be adjusted using the manual power settings built into the strobe (varies by model).
An individual Fiber Optic Converter and compatible cord is needed for each strobe. Use of two strobes requires two Fiber Optic Converters.
This converter attaches to an Ikelite DS strobe. It is not intended to be attached to a housing and will provide no functionality if attached to an Ikelite bulkhead in a housing.
Alternatives
There are two shooting scenarios where the High Sensitivity Optical Slave Converter # 4405 would be a better option:
- If you're shooting a DSLR or mirrorless camera with Nauticam fiber optic converter and want to shoot at a higher frame rate (4 FPS or faster).
- If your primary purpose is to trigger your strobes remotely at a distance from the housing without a fiber optic cable in between.
Ikelite FL 6 inch Dome for Lenses Up To 2.5 Inches
$ 249.95 - Épuisé
Ikelite FL 6 inch Dome for Lenses Up To 2.5 Inches - IK550315
For lenses with a 110 to 170 degrees angle of coverage. Ikelite acrylic domes are injection molded specifically for underwater photography, and represent the finest optics in the industry. Domes are recommended for lenses 28mm and wider to preserve the full angle of coverage. Zoom lenses that do not focus to 12 inches (30 cm) require a +4 diopter close-up lens.
Accommodates lenses up to 2.5-inch (6.3 cm) long and 3.3-inch (8.4 cm) in diameter. Measure your lens or use our Port Finder to determine compatibility. This port does not allow use of a dome shade.
Ikelite FL 6 inch Dome for Lenses Up To 4 Inches
$ 249.95 - Épuisé
Ikelite FL 6 inch Dome for Lenses Up To 4 Inches - 550350
Ikelite acrylic domes are injection molded specifically for underwater photography, and represent the finest optics in the industry. Domes are recommended for lenses 28mm and wider to preserve the full angle of coverage. Zoom lenses that do not focus to 12 inches (30 cm) require a +4 diopter close-up lens.
Accommodates lenses up to 4-inch (10.1 cm) long and 3.3-inch (8.4 cm) in diameter. Measure your lens or use our Port Finder to determine compatibility.
Ikelite FL 6 inch Dome for Lenses Up To 4.5 Inches
$ 249.95 - Épuisé
Ikelite FL 6 inch Dome for Lenses Up To 4.5 Inches - 550355
Ikelite acrylic domes are injection molded specifically for underwater photography, and represent the finest optics in the industry. Domes are recommended for lenses 28mm and wider to preserve the full angle of coverage. Zoom lenses that do not focus to 12 inches (30 cm) require a +4 diopter close-up lens.
Accommodates lenses up to 4.5-inch (11.4 cm) long and 3.3-inch (8.4 cm) in diameter. Measure your lens or use our Port Finder to determine compatibility.
Ikelite FL 6 inch Dome for Lenses Up To 5 Inches
$ 249.95 - Épuisé
Ikelite FL 6 inch Dome for Lenses Up To 5 Inches - 550380
Ikelite acrylic domes are injection molded specifically for underwater photography, and represent the finest optics in the industry. Domes are recommended for lenses 28mm and wider to preserve the full angle of coverage. Zoom lenses that do not focus to 12 inches (30 cm) require a +4 diopter close-up lens.
Accommodates lenses up to 5-inch (12.7 cm) long and 3.3-inch (8.4 cm) in diameter. Measure your lens or use our Port Finder to determine compatibility.
Ikelite FL Dome Port for Nikon 18-105mm
$ 249.95 - Épuisé
Ikelite FL Dome Port for Nikon 18-105mm - 55382
This port is designed specifically for the Nikkor 18-105mm f/3.5-5.6G ED VR AF-S DX lens. This lens requires the addition of a +4 close-up lens to focus properly behind a dome underwater. Close-up lens not included.
Ikelite acrylic domes are injection molded specifically for underwater photography, and represent the finest optics in the industry.
Ikelite FL Dome Port for Tokina 12-24mm
$ 249.95 - Épuisé
Ikelite FL Dome Port for Tokina 12-24mm - 550351
Ikelite acrylic domes are injection molded specifically for underwater photography, and represent the finest optics in the industry. Domes are recommended for lenses 28mm and wider to preserve the full angle of coverage.
Zoom is operable using the Large Diameter Zoom Set, included with all Ikelite DSLR housings. A +2 close-up lens is not required, but may be added to improve edge sharpness. Auto-focus only.
Ikelite FL Extension for Lenses Up To 5.1 Inches
$ 275.00 - Épuisé
Ikelite FL Extension for Lenses Up To 5.1 Inches - 551028
Ikelite FL Flat Port For Lenses Up To 2.5 Inches
$ 149.95 - Épuisé
Ikelite FL Flat Port For Lenses Up To 2.5 Inches - 5501
Flat ports are recommended for standard, macro and telephoto lenses. Due to refraction, flat ports reduce the angle of coverage of a lens and magnify the image. This makes the flat port ideal when using standard, macro or zoom lenses to shoot small subjects.
Note that if a port is long enough to accommodate the full length of a 1:1 macro lens, the lens may vignette when used at infinity. If access to the lens' full range is desired, then select a dome port instead.
Accommodates lenses up to 2.5-inch (6.3 cm) long and 3.3-inch (8.4 cm) in diameter. Measure your lens or use our Port Finder to determine compatibility.
Ikelite FL Flat Port For Lenses Up To 4.5 Inches
$ 199.95
Ikelite FL Flat Port For Lenses Up To 4.5 Inches - 5505
Flat ports are recommended for standard, macro and telephoto lenses. Due to refraction, flat ports reduce the angle of coverage of a lens and magnify the image. This makes the flat port ideal when using standard, macro or zoom lenses to shoot small subjects.
Note that if a port is long enough to accommodate the full length of a 1:1 macro lens, the lens may vignette when used at infinity. If access to the lens' full range is desired, then select a dome port instead.
Accommodates lenses up to 4.5-inch (11.4 cm) long and 3.3-inch (8.4 cm) in diameter. Measure your lens or use our Port Finder to determine compatibility.
Ikelite FL Port for Nikon 28-105mm D
$ 249.95 - Épuisé
Ikelite FL Port for Nikon 28-105mm D - 550381
This port is designed specifically for the Nikkor 28-105mm 1:3.5-4.5D Macro lens. A control is provided to switch between Normal and Macro focal ranges. This lens requires the addition of a +4 close-up lens to focus properly behind a dome underwater. Close-up lens not included.
Ikelite acrylic domes are injection molded specifically for underwater photography, and represent the finest optics in the industry.
Ikelite Flex Arm Adapter 1/2-to-3/4 inch
$ 12.00
Ikelite Flex Arm Adapter 1/2-to-3/4 inch
Ikelite SKU: 0565.54 | Helix SKU: 056554
Overview
Use to transition between 1/2-inch and 3/4-inch flex arm components. Features male fitting on 1/2-inch end and female fitting on 3/4-inch end.
Ikelite Flex Arm for DS51
$ 49.00 - Épuisé
Ikelite Flex Arm for DS51 - 408721
One of our most popular strobe arms pre-assembled and ready to be attached to your DS50 or DS51 strobe. A great start to any system, providing flexibility to shoot both wide angle and macro photography. Includes flex ball at release handle, flex ball at Micro Tray or DSLR top mount, 12 pieces of 3/4 flex arm extension and mount at DS50 or DS51 type strobe.
Ikelite Flex Light Arm For Action Tray
$ 39.95
Ikelite Flex Light Arm For Action Tray
Ikelite SKU: 4087.26 | Helix SKU: 408726
Overview
A lightweight and flexible arm for the Action Tray II for compact digital housings. The 8.5" (216mm) long flex arm accepts any light mount which is compatible with 1/2" Loc-line flex components, including the 1/2" flex mounts offered by Light & Motion. Mounting of strobes or larger video lights is not recommended. To mount a strobe, use the Flex DS51 Strobe Arm for Action Tray product # 4087.27 instead.
This arm can be attached to the top of a Quick Release Handle using the # 9573.31 mount.
Ikelite Flex Mount for AF35 & Featherweight Tray
$ 20.00 - Épuisé
Ikelite Flex Mount for AF35 & Featherweight Tray - 95735
Mounts to the Featherweight Tray or AF35 strobe tray.
Ikelite Flex Mount for Gamma
$ 19.95 - Épuisé
Ikelite Flex Mount for Gamma
Ikelite SKU: 1882 | Helix SKU: 1882
Overview
Based on our popular flex arm system, this mount kit includes everything you need to attach your Gamma to a 1/2 in or 3/4 in flex arm. Gamma flashlight not included.
Ikelite Flex Mount for Quick Release Handle
$ 35.00 - Épuisé
Ikelite Flex Mount for Quick Release Handle - IK957331
Mounts to the Ikelite Quick Release Handle for attachment of 3/4 in flex arms.
Ikelite Flex Strobe Arm For Action Tray
$ 39.95 - Épuisé
Ikelite Flex Strobe Arm For Action Tray
Ikelite SKU: 4087.27 | Helix SKU: 408767
Ikelite Flex Strobe Arm For Action Tray
$ 39.95
Ikelite Flex Strobe Arm For Action Tray
Ikelite SKU: 4087.27 | Helix SKU: 408727
Overview
A lightweight and flexible arm for the Action Tray for compact digital housings. The 10" (254mm) long flex arm accepts a DS50 or DS51 strobe. Mounting of larger strobes is not supported. To mount a video light, use product # 4087.26 instead.
This arm can be attached to the top of a Quick Release Handle using the # 9573.31 mount.
Ikelite Focus Gear for Canon EF 100mm IS USM Macro Lens
$ 65.00
Ikelite Focus Gear for Canon EF 100mm IS USM Macro Lens
Ikelite SKU: 5509.71 | Helix SKU: 550971
Overview
For use with DL port systems. Refer to the appropriate lens port chart for complete compatibility information.
What's Included
- Zoom sleeve
Ikelite Front Lens Cap for W-20 and W-30 Wide Angle Lenses
$ 14.95
Ikelite Front Lens Cap for W-20 and W-30 Wide Angle Lenses
Ikelite SKU: 0200.93 | Helix SKU: 020093
Overview
Protective cover for W-20 and W-30 lenses.
Ikelite GoPro Mount Kit for DSLR Housing
$ 94.95
Ikelite GoPro Mount Kit for DSLR Housing
Ikelite SKU: 2602.5 | Helix SKU: 26025
Overview
Mount your GoPro to any Ikelite DSLR housing featuring a central top mount.
What's Included
1" Ball Mount at DSLR Top Mount # 4081.6
1" Ball Clamp for Lightweight Accessories # 4081.21
1" Ball Mount for GoPro # 4081.73
Documentation
Ikelite Halogen Bulb for C-Lite 8, Super-8 Lights
$ 17.95
Ikelite Halogen Bulb for C-Lite 8, Super-8 Lights
Ikelite SKU: 0042.58 | Helix SKU: 004258
Overview
High-intensity halogen bulb with standard PR-style base. Compatible with Ikelite 8 cell lights including the C-Lite 8 Halogen and Super-8 Halogen.
Ikelite Halogen Bulb for PC, PCm, RCD, Mini-C
$ 19.95
Ikelite Halogen Bulb for PC, PCm, RCD, Mini-C
Ikelite SKU: 0042.55 | Helix SKU: 004255
Overview
High-intensity halogen bulb with standard PR-style base. Usable with 4-cell PC, PCm, RCD, and Mini-C flashlights.
Ikelite Halogen Bulb for PCa, SS200
$ 19.95
Ikelite Halogen Bulb for PCa, SS200
Ikelite SKU: 0042.56 | Helix SKU: 004256
Overview
High-intensity halogen bulb with standard PR-style base. Usable with 6-cell PCa flashlights and Substrobe 200 modeling light.
Ikelite Left-Hand Quick Release Handle for Steady Tray
$ 34.95
Ikelite Left-Hand Quick Release Handle for Steady Tray - 95313
The Ikelite Quick Release Handle allows for easy attachment and removal of arm components at the touch of a button for added convenience above and below water.
Durable aluminum and ABS construction with soft-touch rubber over-molding for a comfortable grip for large or small hands. Placement of release handle does not interfere with opening and closing the housing.
Compatible with Steady Tray for GoPro and Micro Trays. Left-hand and right-hand handles sold individually. Left-hand handle mounts on the left side when viewing the housing and tray from the back. Left and right handles are not interchangeable.
Ikelite Left-Hand Quick Release Handle with Extension
$ 64.95
Ikelite Left-Hand Quick Release Handle with Extension - IK407701
Ikelite Locking Stainless Steel Lid Snap
$ 19.95
Ikelite Locking Stainless Steel Lid Snap
Ikelite SKU: 0182 | Helix SKU: 0182
Overview
Replacement stainless steel lid snap with lock as used on Ikelite DSLR, compact digital, and video camcorder housings. Lid hook and mounting hardware not included.
Ikelite Modular 0.75 Inch Extension Ring
$ 224.95 - Épuisé
Ikelite Modular 0.75 Inch Extension Ring - 551050
Ikelite Modular 1.75 Inch Extension Ring
$ 224.95 - Épuisé
Ikelite Modular 1.75 Inch Extension Ring - 551058
Ikelite Modular 1.75 Inch Extension Ring with Focus
$ 295.00 - Épuisé
Ikelite Modular 1.75 Inch Extension Ring with Focus - 551075
Ikelite Modular 8 inch Dome for DLM and FL Systems
$ 499.95 - Épuisé
Ikelite Modular 8 inch Dome for DLM and FL Systems - 551045
Ikelite Neoprene Cover for 6-inch Dome, WD-4
$ 29.95
Ikelite Neoprene Cover for 6-inch Dome, WD-4
Ikelite SKU: 0200.1 | Helix SKU: 02001
Overview
Neoprene cover with drawstring to fit Standard 6-inch Dome Port and WD-4 Wide Angle Dome.
Ikelite Neoprene Cover for DSLR Flat Ports
$ 19.95 - Épuisé
Ikelite Neoprene Cover for DSLR Flat Ports
Ikelite SKU: 0200.5 | Helix SKU: 02005
Overview
Neoprene cover with drawstring to fit DSLR Standard Flat Ports featuring a molded plastic front ring.
Ikelite Neoprene Front Cover for 8" Dome Ports
$ 49.95
Ikelite Neoprene Front Cover for 8" Dome Ports
Ikelite SKU: 0200.82 | Helix SKU: 020082
Overview
The new neoprene cover for the 8" dome has a stretch fit with super-soft lining to provide maximum protection for the most important part of your housing.
Two velcro strips on the back of the cover provide an attachment point for the optional Neoprene Rear Cover for 8" Dome Ports which protects the inside of the dome from dust and doubles as a carrying pouch for lubricant, spare o-rings, allen wrenches, and other small parts.
Ikelite Neoprene Rear Cover for 8" Dome Ports
$ 14.95
Ikelite Neoprene Rear Cover for 8" Dome Ports
Ikelite SKU: 0200.83 | Helix SKU: 020083
Overview
Two velcro strips attach this clever pouch to the back of the Neoprene Front Cover for 8" Dome Ports to protect the inside of the dome from dust. A durable plastic top zipper opens a compartment to store lubricant, spare o-rings, allen wrenches, and other small parts right where you need them.
Specifications
Ikelite NT1 TTL Hotshoe for Nikon DSLR
$ 74.95
Ikelite NT1 TTL Hotshoe for Nikon DSLR - IK46061
