Azden 1201 Series System (1201VMX)
$ 1,199.00
Azden 1201VMX Series System
The Azden 1201VMX wireless microphone system combines the 1201URX/VM (V-Mount) receiver with the 1201XT plug-in transmitter.
The Azden 1201URX/VM Receiver comes equipped with a V-Mount adapter for direct mounting on your camera's battery. In addition to the receiver's slot-in design, the 1201-series also offers 188 user selectable, DTV compliant frequencies. True-diversity technology with two complete front-ends and high-gain antennas maximize reception and range while greatly reducing interference and drop-out. The transmitter features a multi-function digital display and rugged construction. 12VDC power is supplied from the camera.
The Azden 1201XT Plug-in Transmitter is designed for use with the 1201 Series receivers. The 1201-series offers 188 user selectable, DTV compliant frequencies. A 3-pin XLR connector accommodates your favorite microphone and provides +48V phantom power if needed. There is a multi-function digital display, and its rugged construction ensures reliable use outdoors, on the road, etc. The transmitter is powered via 2-AA alkaline batteries for up to 8-hours.
Features
- V-Mount battery adapter case
- Plug-in transmitter works w/ any 3-pin XLR mic
- 188 DTV frequencies / 4 UHF TV bands
- True diversity system
- Improved image rejection, S/N ratio & superior diversity isolation
- Multi-function LCD shows channel, frequency, battery info, AF level, and diversity operation
Specifications
1201URX/VM
- RF Carrier Frequency Range: 188 steps ~ 638.125 – 661.875 MHz
- Micro Computer Controlled PLL Synth.
- Noise Reduction: Expander (THAT)
- Effective Operating Range: 200 – 300 ft ~ 60 – 100m
- Frequency Response: 50 – 15kHz (± 1.5dB)
- RF Sensitivity: (12dB SINAD) 1.2μV
- Adjacent Channel Selectivity: > 70dB (± 250kHz)
- Image Rejection: > 93dB
- IF Rejection: > 93dB
- Audio THD: 62dB (± 5kHz Deviation) “A” Weighted
- Power Requirements: 11 – 15V DC @ 220mA
- Dimensions: 82W x 150H x 60D mm – 1201URX/VM
- Operating Temperature Range: -50 – +122 F ~ -10 – +50 C
- Weight: 26.45ounces ~ 750g for 1201URX/VM
1201XT
- Output Power: 30mW
- Max Modulation Sensitivity: +20dBM ~ 0dBm
- MIC Level / Imped. (Dynamic): -60dBm / 2.2kΩ (± 5kHz Dev.)
- Phantom Power: 48V ±2V @ 2mA
- Power Requirements: 3V DC (2 “AA” Alkaline) @ < 180mA – 290 mA w/Phantom Power ON
- Dimensions: 1.57 (W) x 4.49 (H) x 1.57 (D) inches
- 40 (W) x 114 (H) x 40 (D) mm
- Weight w/Battery: 6.35 ounces ~ 180g
In the Box
- 1201URX/VM receiver
- 1201XT plug-in transmitter
- Hardshell carrying case
- Manual
Canon Canon BG-R10 Battery Grip
$ 409.99 - Épuisé
Canon Canon BG-R10 Battery Grip
Canon SKU: 4365C001 | Helix SKU: CA4365C001
Overview
Dedicated to the Canon EOS R5 and EOS R6 mirrorless cameras, the BG-R10 Battery Grip offers extended shooting times as well as improved handling, especially when working in the vertical shooting orientation. The grip's design permits working with two LP-E6NH/LP-E6N/LP-E6 batteries to effectively double battery life. Additionally, the extended design of the grip facilitates a more stable hold and secondary controls, dials, and an additional shutter release permit effective control over the camera. Additionally, the grip is designed to the same weather-resistant standards as the camera bodies for use in inclement conditions.
Compatible Cameras
- EOS R5
- EOS R6
Specifications:
| Battery Type | 2 x Battery Pack (LP-E6NH) |
| Tripod Mounting Thread | 1/4"-20 Female |
| Dimensions (L x W x H) | 3.2 x 5.6 x 4.3" / 8.1 x 14.2 x 10.9 cm |
| Weight | 12.38 oz / 351 g |
Canon Speedlite Transmitter ST-E2
$ 350.00 - Épuisé
Canon Speedlite Transmitter ST-E2
Canon SKU: CA2478A002 | Helix SKU: CA2478A002
Overview
With the Speedlite 550EX and the Speedlite Transmitter ST-E2, it is now possible to use multiple Speedlites under full E-TTL control and without the need for any interconnecting wires. Developed in conjunction with the Speedlite 550EX and the EOS-3 camera, this master control device for a wireless Speedlite flash system meets professional and advanced amateur standards. Its dedicated transmitter controls up to 3 Canon 550EX Speedlites as slave units 33 feet away outdoors and 49.5 feet away indoors. It is mounted as a clip-on with a shoe lock lever and locking pin.
Compatibility:
• PowerShot G15 Refurbished
• Speedlite 580EX II Refurbished
• Speedlite 320EX
• PowerShot G5 X
• Speedlite 430EX II
• PowerShot G3 X
• Speedlite 600EX-RT Refurbished
• PowerShot G3 X Refurbished
• PowerShot G15
• Speedlite 600EX-RT
The Canon ST-E2 is commonly used for Fill flash, General purpose, Night photography, Portraits and more.The Canon ST-E2 is most used by customers who consider themselves to be a Photo enthusiast, Professional, Semi-pro photographer among others.The Canon ST-E2 is popular because customers like the following qualities of the Canon ST-E2: Consistent output, Durable, Easy to use, Fast recycling, Good power output, Lightweight and Versatile
Canon ST-E2 Features
- Advanced Features: E-TTL Compatible Since it is compatible with E-TTL auto flash functions, groups of 550EX Speedlites are able to take advantage of High-Speed Sync, FE Lock, Flash Exposure Bracketing, and Pre-flash evaluative metering.
- Built-in AF-Assist Beam: The AF-Assist Beam automatically fires in low-light and low-contrast situations to assist the camera's auto focusing system.
- Sets and Controls Flash Ratios: Transmitter ST-E2 sets and controls all functions of its Speedlite 550EX slave units. Flash ratios,for example,are controllable between 2 Speedlite 550EX groups.
- High Speed FP Flash: High Speed FP (Focal Plane) flash for synchronization at all shutter speeds is available, even the EOS-3s top speed of 1/8000. Larger apertures can be used to obtain better background blur. And fill flash can be used for moving subjects in daylight. Weight:3.5 oz./100 g (Including battery).
Canon Wireless File Transmitter WFT-E9A
$ 729.99 - Épuisé
Canon Wireless File Transmitter WFT-E9A
Canon SKU: 3830C001 | Helix SKU: CA3830C001
Overview
- Supports Wireless LAN: IEEE 802. 11ac 2X2 MIMO/ac/a/n/g/b for Ultra High-speed Image Transfer using both 2. 4 GHz or 5 GHz.
- Conveniently Transfer Images using FTP transfer, EOS Utility, or Browser Remote* (WFT server).
- Improved User Interface to help Create Wireless Configurations of all Levels of Complexity.
- Compact, Durable and Lightweight Body sealed for Dust- and Water- Resistance.
| Product Dimensions | 1.32 x 0.98 x 2.54 inches |
|---|---|
| Item Weight | 0.81 ounces |
| ASIN | B08358C8PR |
| Item model number | 3830C001 |
| Best Sellers Rank | #418 in MP3 Player FM Transmitters |
| Date First Available | January 7, 2020 |
| Manufacturer | Canon USA |
Canon Wireless File Transmitter WFT-R10A
$ 1,199.00 - Épuisé
Canon Wireless File Transmitter WFT-R10A
Canon SKU: 4366C001 | Helix SKU: CA4366C001
Overview
Canon’s new Wireless File Transmitter WFT-R10A — which also serves as a vertical battery grip — makes wired and wireless data transfer setups simple and easy. Designed specifically with the new EOS R5 camera, the WFT-R10A supports IEEE 802.11ac 2X2 MIMO/ac/a/n/g/bfor fast and secure connections, helping you to quickly and effortlessly transfer JPEG, RAW and HDR PQ HEIF files. By using the FTP transfer, as a studio photographer you can check the image you shot on a larger display, or deliver an image file to a remote editor — even from a faraway distance. With expanded versatility and an enhanced user interface, the WFT-R10A not only boasts incredible speed, but also streamlines wireless photography configurations, whether in the studio or on location.High-performance Pro Workflow Support via Wired/Wireless LAN with Integrated Vertical Battery Grip
Pro-level performance for transfer of large data files with high-speed communication is possible through use of supported standards of IEEE 802.11ac 2x2 MIMO over 5Ghz, and 802.11n 2x2 MIMO over 2.4Ghz frequencies. 2x2 MIMO Technology (Multi-Input Multi Output) uses dual antennas to transfer two streamsof data to a receiving device enabling theoretical transfer speeds of up to 867 Mbps with 802.11ac 2x2 MIMO and supporting substantially longer distance transmission compared to EOS R5's built-in Wireless support. Other supported standards include 802.11b/g/n over 2.4Ghz frequency and 802.11 ac/a/n over 5GHZ for further versatility in connection. All of this communication capability is integrated in to a easy to use and ergonomic grip.
Vertical Battery Grip
The WFT-R10A holds two battery packs* of LP-E6NH, LP-E6N or LP-E6 battery, and also serves as a vertical battery grip. The ergonomic grip allows you to operate the multi-controller for easy AF operation, and is designed for vertical shooting – making portrait photography even easier. The WFT-R10A has adust proof and moisture-proof design, which matches that of the EOS R5 camera.
Supports FTP, FTPS, and SFTP for Various Options of Encryption and Secure File Transfer
The Wireless File Transmitter WFT-R10A offers a number of convenient ways to transfer images based on the available equipment and the task at hand. Image transfer directly from the camera to local or offsite servers is facilitated via easily configurable FTP transfer. When the WFT-R10A is attached, SFTP can be used, and FTP mode is further enhanced.
EOS Utility and Network Setting Tool support
With Canon's refined EOS Utility software installed on a PC, full-featured Live View remote shooting and image transfer are made simple. The Network Setting Tool assists with wire service shooters in creating, editing and deleting network settings on a larger screen. This tool also helps with the ability to export and import communication setting files (NIF*), setup LAN settings, and even check access to FTP servers and create folders.
Easy to use Interface to help Create Wireless Configurations of all Levels of Complexity
The Wireless File Transmitter WFT-R10A provides a fast throughput for image uploading and user interface to help enable speedy set-up and configuration of wireless networks.
Enhanced Linked Multi-Camera Shooting and Wireless Time Syncing
Connect up to ten receiver cameras (EOS R5＋WFT-R10A) to one EOS R5＋WFT-R10A via wireless LAN or sync the time of the receiver cameras (EOS R5＋WFT-R10A) with the time of the sender camera. While at your computer, images taken with multiple cameras can be displayed and managed in chronological order.
Durable and Dust-and Water-Resistance
The Wireless File Transmitter WFT-R10A makes it ideal to take along for just about any activity due to its design. Built to withstand inclement weather, this transmitter has the same dustproof and water-resistant construction used in the EOS R5 camera body. A durable design helps ensure that equipment can be safely used in various conditions, making the WFT-R10A an ideal accessory for demanding photographers constantly on the move.
Type
Wireless File Transmitter (WFT)
Compatible Cameras
EOS Utility
Linked Shooting
Transmission Range: Approx. 492 ft. / 150m from the sender camera (when signal strength is favorable)
WFT Server Start: Possible at manual connection with receiver camera
Transmission Range
Linked shooting: Max. approx. 164 ft. / 50m
Smartphone connection: Not supported
* With no obstructions between the transmitting and receiving antennas and no radio interference
Charging / Power Supply
W x H x D
Ounces/grams
Temperature
Humidity
85% or less
Nikon WT-4A WIRELESS TRANSMITTER
$ 1,000.00
Nikon WT-4A WIRELESS TRANSMITTER
Mfr SKU: 25365 | Helix SKU: NK25365
Overview:
Wireless transmitter for D3, D700 and D300 allows WiFi remote operation (with optional Camera Control 2 software) and image transfer (with FTP software) or wired Ethernet connection.
Supports wireless LAN conforming to IEEE 802.11b/g, IEEE 802.11a, (WiFi a/b/g) and wired LAN conforming to IEEE 802.3u (100BASE-TX) and IEEE 802.3 (10BASE-T).
Transmission Range: Transmission range when wireless LAN is used is approx. 590 feet (IEEE 802.11b/g) or 850 feet (IEEE 802.11a). (Varies according to transmission conditions.)
Power Requirements:: EN-EL3e battery (sold separately) and MH-18a charger for EN-EL3e battery or AC Adapter EH-6 (sold separately).
WiFi Support: Supports wireless LAN conforming to IEEE 802.11b/g, IEEE 802.11a (WiFi a/b/g), and wired LAN conforming to IEEE 802.3u (100BASE-TX) and IEEE 802.3 (10BASE-T).
Transfer Modes: Ad-hoc mode enables peer-to-peer connection of a WT-4A and a computer or FTP server. Infrastructure mode enables connection via an access point.
Image Transfer mode: Images stored in a memory card and those just taken can be transferred and saved on a computer or FTP server.
Thumbnail Select mode: Thumbnail images can be displayed on a connected computer, and selected images can be downloaded and saved.
PC mode: With Camera Control Pro 2 (optional), camera settings can be controlled and images taken can be transferred and saved on a computer.
Printer mode: JPEG images stored in a memory card can be transferred to a printer connected with a computer.
Nominal Data Transfer Rates: IEEE 802.11a 54M/48M/36M/24M/18M/12M/9M/6M (bps) IEEE 802.11g 54M/48M/36M/24M/18M/12M/9M/6M (bps) IEEE 802.11b 11M/5.5M/2M/1M (bps)
Specifications:
Wireless transmitter for D3, D700 and D300 allows WiFi remote operation (with optional Camera Control 2 software) and image transfer (with FTP software) or wired Ethernet connection.
Supports wireless LAN conforming to IEEE 802.11b/g, IEEE 802.11a, (WiFi a/b/g) and wired LAN conforming to IEEE 802.3u (100BASE-TX) and IEEE 802.3 (10BASE-T).
Transmission Range: Transmission range when wireless LAN is used is approx. 590 feet (IEEE 802.11b/g) or 850 feet (IEEE 802.11a). (Varies according to transmission conditions.)
Power Requirements: EN-EL3e battery (sold separately) and MH-18a charger for EN-EL3e battery or AC Adapter EH-6 (sold separately).
WiFi Support: Supports wireless LAN conforming to IEEE 802.11b/g, IEEE 802.11a (WiFi a/b/g), and wired LAN conforming to IEEE 802.3u (100BASE-TX) and IEEE 802.3 (10BASE-T).
Transfer Modes: Ad-hoc mode enables peer-to-peer connection of a WT-4A and a computer or FTP server. Infrastructure mode enables connection via an access point.
Connection Modes:
Image Transfer mode: Images stored in a memory card, and those just taken, can be transferred and saved on a computer or FTP server.
Thumbnail Select mode: Thumbnail images can be displayed on a connected computer, and selected images can be downloaded and saved.
PC mode: With Camera Control Pro 2 (optional), camera settings can be controlled and images taken can be transferred and saved on a computer.
Printer mode: JPEG images stored on a memory card can be transferred to a printer connected with a computer.
Nominal Data Transfter Rates:
IEEE 802.11a 54M/48M/36M/24M/18M/12M/9M/6M (bps)
IEEE 802.11g 54M/48M/36M/24M/18M/12M/9M/6M (bps)
IEEE 802.11b 11M/5.5M/2M/1M (bps)
Sekonic Corporation RT-32CTL Radio Transmitter Module, (Black)
$ 88.00 - Épuisé
Sekonic Corporation RT-32CTL Radio Transmitter Module, (Black)
Sekonic SKU: 401-625 | Helix SKU: SE401625
Overview
Sekonic Corporation RT-32CTL Radio Transmitter Module, (Black)
