Cactus Wireless HHS Flash Transceiver V6 IIS - Sony
$ 95.00 $ 85.00 - Épuisé
Cactus Wireless HHS Flash Transceiver V6 IIS - Sony
Cactus SKU: CACV6IIS | Helix SKU: CUCACV6IIS
Overview
Product Description
The Cactus V6 IIs is a wireless flash trigger dedicated for Sony camera and flash that supports HSS and can remote control power output and zoom angle of Sony system flashes. It can also triggers the Cactus V6 II, which makes the V6 IIs the World’s First Sony-supported wireless flash trigger that supports cross-brand high-speed sync (HSS) and control power output and zoom angle of Canon, Fujifilm, Nikon, Olympus, Panasonic and Pentax system flashes all at the same time.*
Equipped with two (2) high-speed sync modes (Normal HSS and Power Sync), AF-assist, auto-detect camera and flash system, Multi-master, and remote control abilities of power and zoom, Cactus V6 IIs packs all that you need for your Sony system in a compact body with simplistic controls.
* With the exception of Sony system flashes due to special timing requirements so it must be paired with a Sony camera in order to support HSS.
UPC: 4897035130521
Specifications
Cactus Wireless Flash Transceiver V6 IIs
Major features:
- Cross-brand wireless manual power and zoom control with HSS support of Canon, Fujifilm, Nikon, Olympus, Panasonic and Pentax flashes with the Cactus V6 II
- Specifically designed for Sony camera and flashes with the Multi-Interface (MI) shoe
-
Two cross-brand high-speed sync modes:
- Normal HSS supports shutter speeds up to 1/8000s
- Power Sync boosts flash contribution above camera’s x-sync speed
- Multi-master supports up to 20 photo¬graphers firing the same set of flashes at their own power settings
- AF-assist light assists focusing in low light environment1
- Flash profile customization ensures accurate power output
- Work seamlessly with the Cactus RF60 Wireless Flash series to support HSS and Power Sync
- Other useful features inherited from the V6 including:
- Lo Power
- Absolute Power
- TTL Pass-through
- Group Sequence
- Sport Shutter
- Remote Shutter
- Relay Mode
- Delay Mode
- Firmware Update support
Compatible flash models
Sony ADI / P-TTL HS models:
- Metz 44AF-14, 64AF-1;
- Nissin i40, i60*;
- Sony F43M, F58AM4, F60M
* tested with Auto flash profile
Notes on compatibility:
- Cactus V6 IIs is not compatible with Cactus V6 on the current firmware. After updating to new firmware (version pending) on the V6, V6 II will be backward-compatible within camera’s x-sync speed;
- Cactus V6 (RX) does not support Normal HSS when triggered by the V6 IIs;
- Cactus V6 (RX) supports Power Sync by updating to new firmware (version pending) when triggered by the V6 IIs;
- Cactus RF60 (RX) supports Normal HSS and Power Sync by updating to new firmware (version 200 and onwards) when triggered by the V6 IIs;
- Cactus V6 IIs does not work with any other flash trigger model including Cactus V4, V2s or V2;
- Cactus V6 IIs does not transmit TTL information wirelessly;
- Cactus V6 IIs is not compatible with flashes or strobes with reversed polarity connectors;
- Cactus V6 IIs is compatible with practically all Sony cameras that come with either (1) a Sony Multi-interface Shoe, (2) a Minolta / Sony iISO hot shoe via an adapter, or (3) a female sync port connection (supports only basic flash triggering;
- Cactus V6 IIs is compatible with the Wireless Flash Transceiver V5 and Laser Trigger LV5 for basic flash triggering and shutter release.
1 AF-assist works when the camera sends out a corresponding signal.
2 Requires a hot shoe adapter such as Sony ADP-MAA.
Item Includes
ProMaster SM1S Speedlight Master Transmitter for Sony M.I.S.
$ 69.95 - Épuisé
ProMaster SM1S Speedlight Master Transmitter for Sony M.I.S.
ProMaster SKU: 4959 | Helix SKU: PR49591
Overview
The ProMaster SM1S Wireless Speedlight Master Transmitter works over a long range (325' 100m) to control a ProMaster 200ST-R Speedlight as a slave flash. It can fire the slave(s) in up to 3 groups with up to 15 slaves per group using features such as TTL exposure control, slow sync. HSS high-speed sync., flash bracketing, exposure compensation, and more.
The SM1S utilizes an internal Li-Ion, rechargeable battery as its power source. The unit is incredibly efficient and the battery lasts a very long time. Plus, the SM1S can operate while connected to a charger, for times when you need even more run time. OK, wait a minute, let's explore this a bit more. Let's say your SM1S has sat dormant for 6 months and then you decide to use it extensively for a couple of days. Near the end of day-two you suddenly notice its battery is getting low and realize you had never thought about charging it. Perhaps you can take a 2-hour break and plug it into a wall outlet, since that's all it takes to bring the battery back up to 100%. But, maybe that's not a good option. It's cool. You can use the SM1S while it's plugged-in for charging. Maybe having a cord running to a wall outlet is not convenient. No worries! Grab a common power bank (like the one you use for your phone) and simply connect that to the SM1S. You'll be golden! The USB micro-b to USB-A charging cord is included with the SM1S and is s common cord that can be bought at any corner store (in case you forget it at home). In fact, you may already have one or a dozen laying around from other devices.
Specifications
- 2.4GHz radio operating frequency
- Wireless range: 325' / 100 m
- 15 Channels + auto
- 3 Groups A/B/C with ratio control (up to 15 units in a group)
- Manual output power range: 1 - 1/128th
- Net Weight: 3.6 oz / 102 g
- Dimensions: 3 5/16" x 2 9/16" x 1 11/16" (84.1 mm x 65.1 mm x 42.9 mm)
- Power Source: Integrated, rechargeable Li-Ion battery (3.7 V 1,000 mAh)
- Charging input: DC 5V 0.5 A
- USB port: Micro B
- ProMaster 5398 USB firmware downloading cable for computer connection
