Quantum Replacement flashtube QF30 #860940
$ 159.95
Quantum Replacement flashtube QF30 for QFlash models T & T2
Replacement flashtube for all T series Qflash
Quantum Turbo 3 Rechargeable Battery
$ 655.95
Quantum Turbo 3 Rechargeable Battery
Quantum SKU: 860140 | Helix SKU: QU860140
Overview
When you are shooting a big assignment, traveling in remote locations, your camera or flash batteries are drained and your are without access to electricity, then the ideal solution is the Turbo 3 Rechargeable Battery from Quantum Instruments. This is a high voltage battery that works with most shoe- and handle-mount professional quality flash units and all Quantum Qflash, T-series and Trio/Pilot portable flashes. The Turbo 3 has the capacity to provide 1050 full-power flashes for shoe-mount and 750 flashes for handle-mount flash units.
The Turbo 3 has two outlets so you can simultaneously power a digital camera and a flash or two flashes. Cables are secured to the battery with locking sockets so you don't have to worry about a cable falling out while you are in the middle of shooting. Compatible cables for Nikon, Canon and Qflash Trio are available (sold separately).
This NiMH battery is equipped with four "fuel gauge" LED status indicators which keep you aware of how much power you have left. Recycling times average one second and it takes about three hours to fully charge the unit with the included standard battery charger.
Turbo 3 is Quantum's highest-capacity battery. It weighs only 32 oz (900 g) and can be carried around easily with the included belt clip.
- Unlike other types of batteries, the Turbo 3 uses NiMH batteries that have no "memory." You can "top off" your Turbo 3 at any time, or give it a quick charge to get a few more shots.
- Secure locking flash cables for Nikon, Canon and Qflash TRIO with the locking sockets of the Turbo 3 are sold separately.
- The Turbo 3 is supplied with a belt clip, and has fittings for an optional shoulder strap. It can also be conveniently mounted on a light stand or tripod, using the optional Quantum Battery Clamp (QBC).
- Using the two outlets on the Turbo 3, you can simultaneously power a digital camera and a flash or two flashes.
- A standard charger (100-240 volts) is included with the Turbo 3. Chargers are also available for many other countries, and for your vehicle.
- After long and/or frequent use, the internal battery can be replaced by Quantum Instruments at a nominal cost.
- To check the Turbo 3 capacity when it is not connected, depress the ON button until the "fuel gauge" LED display comes on to read the power level. The gauge will automatically turn off.
Specifications
-
Chemistry NiMH Capacity Full Power Flashes
Shoe mount: 1050
Handle mount: 750
Qflash: 600
Trio: 1050
Full Power Flashes with Flash & Digital Camera
Shoe mount: 600
Handle mount: 450
Qflash: 375
Trio: 630
Typical Partial-Power Flashes in Automatic/TTL Mode
Shoe mount: 1275
Handle mount: 900
Qflash: 750
Trio: 630Recycling Time Shoe mount: 1 sec
Handle mount: 1.1 sec
Qflash: 1.9 sec
Trio: 1 secRecharge Time 3 hr Dimensions (LxWxH) 5.87 x 4 x 1.75" (15 x 10 x 4.45 cm) Weight 32 oz (900 g)
R-3 Digital LED Video Light # 323005 - NEW
$ 69.95
R-3 Digital LED Video Light # 323005 - NEW
R-3 II Digital LED Video Light # 323081 - NEW
$ 46.95
R-3 II Digital LED Video Light # 323081 - NEW
The R-3 II features three (3), daylight-balanced Power LEDs that deliver up to 500 lx of illumination, and the unit is dimmable from 20-100%. This light also features a unique barn door system. The barn door system is composed of two (2) barn doors that act as flags to shape your light and of two (2) swing-away filters, one (1) tungsten filter and one (1) diffusion filter. Whether shooting indoors or in tight quarters, the R-3 II offers solutions for adjusting the quality of your light as needed. This light has a standard cold shoe mount that has an integrated 1/4"-20 female thread. The addition of the 1/4"-20 female thread allows for the attachment of mounting accessories such as a Baby Pin, Spigot, or Hand Grip. This R-3 II model comes with a Sony NP-F battery plate. The R-3 II comes in two battery plate options: Sony NP-F and Panasonic D28S.
R-3 LED Video Light - Sony 118111030101
$ 69.95
R-3 LED Video Light - Sony 118111030101
The R-3 features three (3), daylight-balanced Power LEDs that deliver up to 500 lx of illumination, and the unit is dimmable from 20-100%.
This light also features a unique barn door system. The barn door system is composed of two (2) barn doors that act as flags to shape your light and two (2) swing-away filters, one (1) tungsten filter and one (1) diffusion filter. Whether shooting indoors or in tight quarters, the R-3 offers solutions for adjusting the quality of your light as needed.
This R-3 model comes with a Sony NP-F battery plate. This light has a standard cold shoe mount that has an integrated 1/4"-20 female thread. The addition of the 1/4"-20 female thread allows for the attachment of mounting accessories such as a Baby Pin, Spigot, or Hand Grip.
Bulb: Power LEDLight Angle: 80 degrees
Illuminance: 500 lx
Power Variation: 20-100%
Color Rending Index (Ra): 80%
Correlated Color Temperature (CCT): 5600K (3200K w/ Tungsten Filter)
Power Source: Built-in Sony NP-F Battery Pate
Operating Voltage: 5.8-8.4V DC
Lasting Time: 100 minutes with Sony NP-F550
Shoe Type: Standard Cold Shoe w/ integrated 1/4"-20 female thread
Nominal Weight: 11 oz / 325 g (without battery)
Nominal Dimensions: 12.3 x 10 x 7.3 (cm)
Package Contents:
(1) x R-3 Video Light (S)
(1) x Barn Door System
(1) x Operation Manual
(1) x Warranty Card
R-4 Digital LED Video Light (Sony Battery Plate) # ISMND
$ 46.95
R-4 Digital LED Video Light (Sony Battery Plate) # ISMND
R4 is a flicker free and heat-free LED light, which produce 700 lux light,light intensity can be adjusted by the dimmer switch at the back (adjusting without flicker).The R4 produces a 5600K very clean and natural color light.If you need to lower the color temperature, just simply attach Orange Warming filter to the front of the light.You can make the light soft with the White Diffusion filter.
Specification:
Bulb: POWER LED
Illumination Angle: 60 degrees
Watt loss:12w
Luminous: 700Lux
Power Variation: 25-100%
Color Rendering Index(Ri):≥80
Operating Voltage: 5.8V-16.8V
Correlated Colour Temperature(CCT): 5600K/3200K
Battery: F970 battery(not included)
Weight: 325g without battery
Dimensions: 127mm(W) x 72mm(H) x 105mm(D)
Package Contents:
1 x R4 Video Light
1 x Barn Doors Bracket
1 x Diffuser
1 x Color Filter
1 x Manual
R-4 LED Video Light - Panasonic
$ 79.95
R-4 LED Video Light - Panasonic
Description:
This professional LED light features 126 super bright LEDs with an effective light throw of up to 35 feet. The LED light is dimmable so you can adjust the amount of light you need for each project or setting. The base can be tilted so you can aim the light up or down. You can use many type of Sony NP-F, NP-FH series and Panasonic CGR series batteries to power this LED light. Or you can use 6 AA batteries. This light will run for approximately 2.5 hours on a set of AA batteries. The unit is very light weighting only 8.5 oz without batteries. It has a built in battery meter so you will know how much power it has left. There is a power on-off/dimmable switch to adjust the amount light you need. The unit runs very cool and is safe to touch. Mount on any standard size hot shoe. Come with 3 diffusers. Great for shooting wedding ceremony, reception and many other important events.
Features:
- 126 super bright LED's
- LED video light can be tilted up or down
- Built-in Battery Meter
- On-off switch and fully dimmable
- Shoe-mount compatible with all Pro & Consumer video camcorders and DSLR cameras
- Dimensions 4.75" x 6.50" x 2" including shoe mount
(LED Area is 4.75" x 3.75" x 2") - Effective distance - up to 35 feet
- Approx 685+ Lux at 1 Meter
- Approx. 2.5 hours running time on AA Batteries
- Uses standard AA Batteries or Sony & Panasonic batteries that are listed below - Batteries are NOT Included
R-4 LED Video Light - Sony
$ 79.95
R-4 LED Video Light - Sony
The R-4 features four (4), daylight-balanced Power LEDs that deliver up to 700 lx of illumination. This unit is dimmable from 20-100%.
This light also features a unique barn door system. The barn door system is composed of two (2) barn doors that act as flags to shape your light and of two (2) swing-away filters, one (1) tungsten filter and one (1) diffusion filter. Whether shooting indoors, outdoors, or in tight quarters, the R-4 offers solutions for adjusting the quality of your light as needed.
This light has a standard cold shoe mount that has an integrated 1/4"-20 female thread. The addition of the 1/4"-20 female thread allows for the attachment of mounting accessories such as a Baby Pin, Spigot, or Hand Grip.
The R-4 comes with a built-in Sony NP-F battery plate.
Specifications:
- Bulb: Power LED
- Light Beam Angle: 60 degrees
- Illuminance: 700 lx
- Power Variation: Stepless 20-100%
- Color Rending Index (Ra): 80%
- Correlated Color Temperature (CCT): 5600K (3200K w/ Tungsten Filter)
- Power Sources: Sony NP-F Battery
- Operating Voltage: 5.8-8.4V
- Battery Life: 70mins with Sony NP-F550
- Mounting: Standard Cold Shoe w/ integrated 1/4"-20 female thread
- Nominal Weight: 14 oz / 397 g (w/ barn door system)
- Nominal Dimensions: 12.3 x 12 x 6.2 (cm)
Package Contents:
(1) x R-50 LED Light Panel(1) x 1/4;-20" Male Thread to Cold Shoe Adapter
(1) x Swinging Tungsten Filter
(1) x Swinging Diffusion Filter
(1) x Wide-angle Diffuser
(1) x Operation Manual
(1) x Warranty Card
R-50 LED Video Light
$ 69.95
R-50 LED Video Light
The R-50 LED Light Panel features fifty (50), daylight balanced Power LEDs that deliver up to 500 lx of illumination. This light is dimmable from 0-100% and can be powered by either AA batteries or by an external power source through its DC 2.5 jack.
This light features two swing away filters: one (1) tungsten filter and one (1) diffusion filter. The light comes standard with an 1/4"-20 Male Thread to Cold Shoe Adapter which attaches to the R-50 1/4;"-20 female thread-in.
Specifications:
- Bulb: Power LED
- LED Count: 50
- Light Beam Angle: 60 degrees
- Illuminance: 500 lx
- Power Variation: 0-100%
- Color Rending Index (Ra): 85%
- Correlated Color Temperature (CCT): 5600K (3200K w/ Tungsten Filter)
- Power Sources: AA Batteries / DC 2.5 jack
- Operating Voltage: 5-15V
- Battery Type: 4x AA Battery (Not Included)
- Battery Life: 80mins with AA Battery
- Mounting: 1/4;"-20 Female Thread-in; Packaged with 1/4"-20 Male Thread to Cold Shoe Adapter
- Nominal Weight: 6 oz / 192 g
- Nominal Dimensions: 10.5 x 8.8 x 5.6 (cm)
Package Contents:
(1) x R-50 LED Light Panel(1) x 1/4";-20 Male Thread to Cold Shoe Adapter
(1) x Swinging Tungsten Filter
(1) x Swinging Diffusion Filter
(1) x Wide-angle Diffuser
(1) x Operation Manual
(1) x Warranty Card
Ranger Quadra Hybrid Lead Standard Set A
$ 1,819.99 - Sold Out
Ranger Quadra Hybrid Lead Standard Set A
Rosco CalColor Filter Kit - 12"x12"
$ 59.95 - Sold Out
Rosco CalColor Filter Kit - 12"x12"
Rosco SKU: 110116120001 | Helix SKU: RS16120001
Overview
A patented system of lighting filters that is calibrated to produce pure primary, secondary and two tertiary colors for camera. Comprised of at least four densities of each color - 15, 30, 60 and 90 - the kit contains one piece each of the CalColor™ filters available that can be used to predictably add or subtract color from your shot.
Sheet size: One 12" x 12" (30.48 cm x 30.48 cm) cut each of 33 different color filters
- Primary Colors: Red, Green, Blue
- Secondary Colors: Cyan, Yellow, Magenta
- Tertiary Colors: Pink and Lavender
| 4215 CalColor Blue 15 |
| 4230 CalColor Blue 30 |
| 4260 CalColor Blue 60 |
| 4290 CalColor Blue 90 |
| 4307 CalColor Cyan 07 |
| 4315 CalColor Cyan 15 |
| 4330 CalColor Cyan 30 |
| 4360 CalColor Cyan 60 |
| 4390 CalColor Cyan 90 |
| 4415 CalColor Green 15 |
| 4430 CalColor Green 30 |
| 4460 CalColor Green 60 |
| 4490 CalColor Green 90 |
| 4515 CalColor Yellow 15 |
| 4530 CalColor Yellow 30 |
| 4560 CalColor Yellow 60 |
| 4590 CalColor Yellow 90 |
| 4615 CalColor Red 15 |
| 4630 CalColor Red 30 |
| 4660 CalColor Red 60 |
| 4690 CalColor Red 90 |
| 4715 CalColor Magenta 15 |
| 4730 CalColor Magenta 30 |
| 4760 CalColor Magenta 60 |
| 4790 CalColor Magenta 90 |
| 4815 CalColor Pink 15 |
| 4830 CalColor Pink 30 |
| 4860 CalColor Pink 60 |
| 4890 CalColor Pink 90 |
| 4915 CalColor Lavender 15 |
| 4930 CalColor Lavender 30 |
| 4960 CalColor Lavender 60 |
| 4990 CalColor Lavender 90 |
Rosco Cinegel Filter Kit - 12"x12"
$ 55.99
Rosco Cinegel Filter Kit - 12"x12"
Rosco SKU: 110122120001 | Helix SKU: RS22120001
Overview
An all-purpose collection of the most popular, Academy Award® winning Cinegel materials for photographers and filmmakers. The kit contains one piece each of 15 different, light-control materials, which offers complete control over all aspects of the light in the shot.
Sheet size:
One 12" x 12" (30.48 cm x 30.48 cm) cut each of 15 different filters
- Color corrections that balance the various light sources in the shot.
- Diffusion materials for softening and shaping the beam and controlling shadows.
- Roscoflex reflector to bounce warmed light into the shot.
- Color effects filters for adding dramatic, vibrant color.
Rosco Color Correction Filter Kit - 12"x12"
$ 55.99
Rosco Color Correction Filter Kit - 12"x12"
Rosco SKU: 110118120001 | Helix SKU: RS18120001
Overview
A range of the most popular color correction filters from Rosco's Academy Award®; winning range of Cinegel lighting filters for photographers and filmmakers. The kit contains one piece each of 16 different correction filters that will adjust the color rendering of various light sources.
- CTB's for boosting the color temperature of tungsten or other warm light sources.
- CTO's for warming up daylight balanced sources like strobes, HMI's or LEDs.
- Plusgreens for balancing with light fixtures that have a heavy green spike such as fluorescent bulbs.
- Minusgreens for removing the green content found in light fixtures such as inexpensive LED fixtures.
Sheet size:
One 12" x 12" (30.48 cm x 30.48 cm) cut each of 16 different filters
|
Rosco Color Effects Filter Kit - 12"x12"
$ 55.99 - Sold Out
Rosco Color Effects Filter Kit - 12"x12"
Rosco SKU: 110124120001 | Helix SKU: RS24120001
Overview
The filters in this kit represent the most popular colors Rosco has to offer for use in special events, theatrical productions, photography and filmmaking. The kit contains one piece of 15 different colors to add bold color onto backgrounds, dance areas and set pieces and useful flesh tone colors for use on actors and models.
- Vibrant colors for background washes and dance areas.
- Subtle pinks and rosy ambers for skin tone enhancement.
- Contrasting colors like rich yellows and blues, and moody cyans and purples to enhance the visual presence of your production or photograph.
Sheet size:
One 12" x 12" (30.48 cm x 30.48 cm) cut each of 15 different filters
|
Rosco Diffusion Filter Kit - 12"x12"
$ 55.99
Rosco Diffusion Filter Kit - 12"x12"
Rosco SKU: 110120120001 | Helix SKU: RS20120001
Overview
A collection of diffusion material that photographers and filmmakers can use to affect the character, shape and quality of the light in their shot. The kit includes 15 different pieces of diffusion each designed to produce different diffused densities or effects that offer varying amounts of softness and shadow control to the beam of light.
- White Diffusers for heavy to medium diffusion of the beam.
- Tough Spun Diffusers for light diffusion that also adds a subtle texture to the beam.
- Tough Silk Diffusers that offers heavy to medium diffusion and directionality control of the beam.
Sheet size:
One 12" x 12" (30.48 cm x 30.48 cm) cut each of 15 different filters
|
Rosco Digital After Dark Filter Kit - 12''x12"
$ 97.99
Rosco Digital After Dark Filter Kit - 12''x12"
Rosco SKU: 110114120001 | Helix SKU: RS14120001
Overview
Kevin Adams, founder of the Digital After Dark® blog, worked with us to assemble a kit of lighting filters to use after the sun has set. The kit contains one piece each of 27 different color filters that will help you create several different nighttime lighting effects.
- Blue filters, including some CTB's, for creating cool-lit lighting effects such as moonlight or enhancing water or ice elements in your shot.
- Yellow, straw and orange filters for enhancing interior light, fire/candle light and for balancing your strobe to street lights.
- A generous variety of vibrant effect colors for light painting or enhancing other light-elements in your shot such as neon signs or stop lights.
Sheet size: One 12" x 12" (30.48 cm x 30.48 cm) cut each of 27 different color filters
|
Rosco Location Lighting Filter Kit - 12"x12"
$ 97.99
Rosco Location Lighting Filter Kit - 12"x12"
Rosco SKU: 110126120001 | Helix SKU: RS26120001
Overview
A collection of light modifiers inspired by award-winning photographer Rick Friedman.
For over three decades, Rick Friedman has been photographing authors, professors, celebrities and US Presidential Candidates. Rick shares his unique, easy-to-adopt illumination style in his Location Lighting Workshops™ across the US and UK. The Rosco Location Lighting Filter Kit allows photographers the ability to master Rick's lighting techniques using the same Rosco products he uses in his photography and in his workshops.
The kit contains a selection of Rick Friedman's "must-haves" for his camera bag, including: Rosco color correction and color effect lighting filters, as well as two of Rick's favorite light modifiers - Tough Spun diffusion and Rosco Photofoil.
Sheet size:
One 12" x 12" (30.48 cm x 30.48 cm) cut each of 23 different filters and one 24" x 24" (61 cm x 61 cm) sheet of Photofoil that is folded.
|
Rosco Photo Lighting Filter Kit - 12"x12"
$ 73.99 - Sold Out
Rosco Photo Lighting Filter Kit - 12"x12"
Rosco SKU: 110110120001 | Helix SKU: RS10120001
Overview
A selection of filters, hand-picked to be the essential lighting filters photographers need. The kit contains one piece each of 20 different colors that color correct and add colored effects to the light in your shot.
- CTO and other filters that warm up the lights in your shot.
- CTB filters for creating cool-lit lighting effects.
- Neutral Density filters for lowering the overall output of non-dimmable light sources.
- Plusgreen for balancing your strobe to fluorescent lights.
- A range of color effects filters to add bold, dramatic color into your shot.
Savage 700 Watt Bi-Color LED Umbrella 2-Light Kit
$ 199.99 - Sold Out
Savage 700 Watt Bi-Color LED Umbrella 2-Light Kit
Savage SKU: LED700K-BI | Helix SKU: SGLED700KBI
Overview
The Savage 700W Bi-Color LED Studio Light Kit features two energy efficient, dimmable and blendable bi-color LED chip bulbs. Each light generates the equivalent of 350W incandescent light and provides 20,000 hours of lamp life. Color temperature can be adjusted from 3200K to 5600K to match any available light source. Bulbs can be separately controlled with included remote up to 50 feet away. Blue gel domes are included for creative light effects.
Specifications
Blendable LED lighting to match any light source on set
Adjust from tungsten – daylight balanced light
3000 lumens at 1 meter at 5600K
2800 lumens at 1 meter at 4200K
2400 lumens at 1 meter at 3200K
CRI: 90
Each bulb generates equivalent of 350W incandescent light
Actual watts: 50
Low operating temperature
Dimmable bulbs
20,000 Hours of lamp life
Tri-band technology
High-grade output
Remote control included
Detachable blue gel domes included for creative lighting effects
85% Energy savings
E26 base (will also work in an E27 socket)
Voltage: 100 – 230V
Continuous lighting (versus flash) is especially ideal for sensitive subjects like babies and pets
Item Includes
Kit Includes:
(2) 350 Watt color correctable & dimmable LED studio lights
(2) Umbrella sockets & 9ʼ power cords
(2) 33” Translucent umbrellas
(2) 6ʼ Light stands
(2) Detachable blue gel domes
(1) Remote control
(1) Padded carry bag
Savage Chroma Green Gaffer Tape 1" x 55 yards
$ 12.99
Savage Chroma Green Gaffer Tape 1" x 55 yards
Savage SKU: T-GAFFERN-1 | Helix SKU: SGTGAFFERN1
Overview
- Works on smooth & uneven surfaces
- Allows for consistent straight tears
- High tensile strength
Gaffer tape is an essential piece of gear to have on hand at all times. Popular uses include taping down seamless backdrops to the floor to avoid wrinkling, securing cables or adhering other studio accessories together. The cloth backing with polyethylene coating is heat resistant to 175° Fahrenheit for up to 3 hours. The blended resin and natural rubber compound allows for non-transferring adhesion, to deliver a clean removal with no residue!
Not recommended for use on delicate or uncoated surfaces such as Drywall. Users assume responsibility for suitable use.
Savage Chroma Green Gaffer Tape 2" x 55 yards
$ 24.99
Savage Chroma Green Gaffer Tape 2" x 55 yards - SGTGAFFERN
- Works on smooth & uneven surfaces
- Allows for consistent straight tears
- High tensile strength
Gaffer tape is an essential piece of gear to have on hand at all times. Popular uses include taping down seamless backdrops to the floor to avoid wrinkling, securing cables or adhering other studio accessories together. The cloth backing with polyethylene coating is heat resistant to 175° Fahrenheit for up to 3 hours. The blended resin and natural rubber compound allows for non-transferring adhesion, to deliver a clean removal with no residue!
Not recommended for use on delicate or uncoated surfaces such as Drywall. Users assume responsibility for suitable use.
Savage Green Screen Photo Creator Kit with Digital Software
$ 102.99
Savage Green Screen Photo Creator Kit with Digital Software
Overview:
Using dynamic green screen technology and digital software, a simple photograph taken against a green screen cloth can be dropped into a locale or landmark from anywhere around the world. Our Green Screen Photo Creator Kit makes such photographic wizardry a snap with our easy-to-use Green Screen Wizard software, newly upgraded and now featuring 3,500 digital backgrounds and a 5' x 7' professional-grade green screen backdrop. A great introduction to chroma key technology
Features:
- Green Screen Photo Creator Kit, Software
- True Chroma Key Color 5 x 7' Backdrop
- Hanging Pole Pockets & Metal Grommets
- Removable Hanging Hooks Included
- Win/Mac Compatible Software License Key
- Includes 3,500 Background Images
Specifications:
| Color | Chroma Key green backdrop |
| Size | 5.0 x 7.0' / 1.5 x 2.1 m |
| System Requirements | PC Minimum System Requirements: Windows XP, Vista, 7, 8 or 10 2 GHz processor 3.4GB hard-disk space 2 GB RAM MAC Minimum System Requirements: Leopard, Snow Leopard, Lion, Mountain Lion, Mavericks, Yosemite, El Capitan 3.4GB hard-disk space 2 GB RAM |
| Package Weight | 1.6 lb |
| Box Dimensions (LxWxH) | 11 x 8 x 2" |
What's in the Box:
- Savage Green Screen Software with 3500 Background Images
- Removable Hanging Hooks
- 5x7' Green Screen Backdrop
- Savage Warranty
Savage Green Screen Software
$ 54.99 - Sold Out
Savage Green Screen Software
Savage SKU: DBK720 | Helix SKU: SGDBK720
Overview
Using dynamic green screen technology and digital software, a simple photograph taken against a green screen cloth can be dropped into a locale or landmark from anywhere around the world. Our Green Screen Software makes such photographic wizardry a snap! Our easy-to-use, newly upgraded software now features an expanded image library of 3,500 digital backgrounds. Combine that with your own image library and the possibilities are limitless. Easily adjust settings to each image and model’s specifications, including adjustments specific to hair color and shadows, to create a natural and cohesive result! Our beginner software can be used with any green screen backdrop including: seamless paper, collapsibles, vinyl and muslin! A great introduction to chroma key technology!
*This item is not available for immediate digital download after purchase. Customers will receive software license key and software access via regular shipping.
|
3.500 digital images with a wide choice of themed locales, or use your own photos! |
|
SYSTEM REQUIREMENTS: MAC Minimum System Requirements: |
Savage LED 60 Watt 2 Light Kit
$ 168.99 - Sold Out
Savage LED 60 Watt 2 Light kit
The Savage 500 Watt LED Studio Light Kit features two energy efficient, fan cool tri-band technology 30W LED chip bulbs. Each light generates the equivalent of 250W incandescent light, 5500K daylight balanced light and provide 20,000 hours of lamp life.
Kit includes:
- (2) 250W LED studio lights
- (2) Umbrella sockets and 9' power cords
- (2) 33" Translucent reflector umbrellas
- (2) 6' Light stands
- (1) Carry bag
Savage Trans-Lum Diffusion Material - Light Weight - 60" x 18' Roll
$ 104.99 - Sold Out
Savage Trans-Lum Diffusion Material - Light Weight - 60" x 18' Roll
Savage SKU: 36018 | Helix SKU: SG36018
Overview
Add the soft glow of frosted glass to images with Savage's Translum Backdrop. Made from sturdy plastic, this versatile backdrop can be used as a light table, prop setup, or background. Props on the other side of the backdrop are seen as shapes. Easily cut with scissors, our Translum Backdrop is also ideal for cutting silhouettes. Now offered in three grades for a range of diffusion options.
Our lightweight grade creates medium diffusion for a soft light effect in situations where some contrast is still desired.
Translum is a versatile and unique, semi-translucent plastic material designed for transforming light and creating stunning visual effects in the studio. It can be used as a light diffuser, tabletop backdrop, cookaloris or portrait background for silhouettes and other creative projects!
Savage Trans-Lum Diffusion Material Roll - Heavy Weight - 54" x 18'
$ 104.99 - Sold Out
Savage Trans-Lum Diffusion Material Roll - Heavy Weight - 54" x 18'
Add the soft glow of frosted glass to images with Savage's Translum Backdrop. Made from sturdy plastic, this versatile backdrop can be used as a light table, prop setup, or background. Props on the other side of the backdrop are seen as shapes. Easily cut with scissors, our Translum Backdrop is also ideal for cutting silhouettes. Now offered in three grades for a range of diffusion options.
The original, heavy grade creates a dramatic soft light effect where diffusing light over a large area is desired. This grade is an ideal and cleanable surface for shooting tables and table tops.
Translum is a versatile and unique, semi-translucent plastic material designed for transforming light and creating stunning visual effects in the studio. It can be used as a light diffuser, tabletop backdrop, cookaloris or portrait background for silhouettes and other creative projects!
Sekonic Corporation 401-364 5-Degree Viewfinder for L-478 Photographic Light Meter (Black)
$ 140.00 - Sold Out
5 degree viewfinder specifically for the Sekonic L-478
Sekonic Corporation 401-624 Lens Hood for L-758, L-558, L-358 and L-608 (Black)
$ 39.00 - Sold Out
Lens Hood and Filter Thread Attachment for the L-758, L-358, L-558 and L- 608.
Sekonic Corporation 401-801 Sync Cord for All Meters (Black)
$ 62.00 - Sold Out
Sync cord for all Sekonic Meters (“Y” Cord)
Sekonic Corporation 401-805 Slide Set for L-398 (Black)
$ 69.00 - Sold Out
Direct readout set for L-398M & L-398A Meters.
Sekonic Corporation 401-821 Replacemen Lumisphere for L-398 (Black)
$ 15.00
For L-398M & L-398A Meters
Sekonic Corporation 401-822 Lumidisc for L-398A (Black)
$ 15.00 - Sold Out
Replacement Lumidisc for L398A
Sekonic Corporation 401-823 Replacemen Lumigrid for 398 (Black)
$ 15.00 - Sold Out
For L-398M & L-398A Meters
Sekonic Corporation 401-830 Replacemen Lumidisc For L-308B II (Black)
$ 33.00 - Sold Out
Replacement Lumidisc for L-308BII & L-308S Meters
Sekonic Corporation 401-831 High Slide for L-398 and L-398M (Black)
$ 14.00 - Sold Out
Replacement High Slide for L-398M & L-398A Meters
Sekonic Corporation 401-842 Replacement Case for L-308BII, L-308S and L-308DC (Black)
$ 14.00 - Sold Out
Replacement case for L-308B II, L-308S and L308DC Meters
Sekonic Corporation 401-845 Replacement Case for L-398M and L-246 (Black)
$ 28.00 - Sold Out
Replacement case for L-398M & L-398A Meters
Sekonic Corporation 401-850 Replacement Case for L-208 Meter (Black)
$ 22.00 - Sold Out
Replacement case for L-208 Meter
Sekonic Corporation 401-853 Case for L-558/758DR Meter (Black)
$ 75.00 - Sold Out
Replacement case for L-558, L-558R & L-758DR Meters
Sekonic Corporation 401-865 Strap for L-208, L-308, L-558 and L-758 (Black)
$ 3.00 - Sold Out
Replacement strap for L-208, L-308, L-558 and L-758
Sekonic Corporation 401-871 Zoom Lens Cap for L-558 and L-758 (Black)
$ 9.00
Replacement Lens Cap for all L-558 and L-758 Meters
Sekonic Corporation Gray Card
$ 34.95 - Sold Out
Standard gray card for all exposure meters
Sekonic Corporation RT-32CTL Radio Transmitter Module, (Black)
$ 88.00 - Sold Out
Sekonic Corporation RT-32CTL Radio Transmitter Module, (Black)
Sekonic SKU: 401-625 | Helix SKU: SE401625
Overview
Sekonic Corporation RT-32CTL Radio Transmitter Module, (Black)
Sekonic i-346 Illuminometer
$ 257.00 - Sold Out
Sekonic introduces the Illuminometer i-346, a simple, easy-to-use lux/foot candle meter for monitoring illumination in workplace and other environments. Small enough to carry in a shirt pocket, it has large LCD readout and simplified controls. Readings can be made in three ways: Single, continuous, or delayed up to 60 seconds for use when reflection from the operator may affect the reading outcome. The readout can be customized to display in either lux (lx) or footcandle (fc) increments. A single AA-size battery powers the i-346 for up to 20 hours of continuous reading. When not in use, it automatically switches off after 4 minutes to save power.
Sekonic L-208 Twin Mate Light Meter (Black/White)
$ 129.00 - Sold Out
The Sekonic L-208 TWINMATE is a palm-sized analog light meter for hand-held incident and reflected ambient light readings. Small and light, the L-208 TWINMATE can also be mounted onto your camera or bracket - using the included hot-shoe adapter for quick, camera-positioned reference readings as you work. Though designed primarily for entry-level users, long-time shooters look to the Sekonic L-208 TWINMATE as an accurate, easy-to-stow, back-up meter. Owners of rangefinder cameras who desire and incident and reflected meter also appreciate the included shoe mount. A sliding lumisphere enables accurate incident readings. Retract the lumisphere, and you can now take reflective readings. The silicon photo diode receives light at an angle of 33-degrees , which is slightly narrower than the angle-of-view of a normal lens. A hold-and-read function maintains the reading for 15 seconds after releasing the measurement button to allow you time to evaluate your settings. A single, long-lasting CR2032 lithium battery powers the show.
Sekonic L-398A Light Meter Studio Deluxe III (Black)
$ 229.00 - Sold Out
Inexpensive light meters need not be ‘cheap’ light meters. When it comes to accuracy and durability, the Sekonic L-398A Studio Deluxe III has been a mainstay of working photographers and cinematographers for four decades running. Small, compact, and easy to use, the Sekonic L-398A incorporates a battery-less amorphous photocell, which enables you to take accurate ambient light readings anywhere, anytime. The Sekonic L-398A’s swivel head allows you to hold down the metering button and ‘walk the set’ to check light levels. Release the button, and the needle locks down the meter’s analog display needle for easy-to-read exposure calculations. Exposures are displayed for both still and cine applications. Incident measurements can be taken with the over 180-degree Lumisphere for general readings of three-dimensional objects, or with the Lumidisc selective area readings, measuring the lighting ratios between highlights and shadow areas or light falling on flat-field objects such as artwork, measurements outdoors or under bright studio lights. For reflected readings, a flat Lumigrid replaces the Lumisphere. If you plan on shooting with a fixed ISO and shutter speed, an optional Slide Set (Direct Reading Slides) that make it easier to take readings in fast-paced shooting scenarios. The Sekonic L-398A Studio Deluxe III makes an ideal prime or back-up meter for still or motion picture shooters.
Sekonic L-858D-U Speedmaster Light Meter
$ 599.00 - Sold Out
Sekonic L-858D-U Speedmaster Light Meter - SE401858
With it's 2.7" color touch screen and truly innovative and sophisticated features, the Sekonic Speedmaster L-858D-U leads the way to the next generation of light measurement control as the world's first multi-function light meter for photographers and filmmakers. Leveraging over 60 years of experience in the image-making world with cutting-edge technology, the Sekonic Speedmaster L-858D-U has undergone a significant design change and boasts a comprehensive feature set sure to meet and exceed the demands of today's photographers and filmmakers.
The first meter of its kind capable of measuring flash duration, while also being able to achieve an accurate ambient exposure reading in dimly lit scenes as low as 0.1 lx, the Sekonic L-858d-U provides image-makers of all levels with the critical exposure data they need to create stunning and beautiful imagery.
The first to provide wireless compatibility with Elinchrom, Phottix, and PocketWizard products, the Sekonic Speedmaster L-858D-U also provides ultimate control to photographers seeking a faster and more streamlined workflow. Limitless creative possibilities are within reach through the meter’s ability to measure High Speed Sync (HSS) and calculate proper ambient-flash exposure for precision flash exposure control.
With an increased light-sensitivity and extended ISO and Shutter Speed Ranges, the Sekonic Speedmaster L-858D-U enables all image-makers to obtain measurements in extremely low light and turn those readings into creative decisions. Finally, matching the high-ISO capabilities of today’s cameras, by accurately metering in low-light, is finally possible.
L-858D-U Speedmaster Light Meter - Technical Specifications
Measuring System
| Incident light | Swivel head | Horizontal (270 degrees) |
| Lumidisc | Retractable | |
| Reflected ligthg | Switching incident/reflected | Operation on LCD |
| Light receiving angle | 1degree(built-in) | |
| Viewfinder(Optional) | No | |
| Flash light | Multiple flash mode | Yes |
| Cordless/cord-in mode | Yes | |
| Radio triggering mode PocketWizard | Yes (optional) | |
| Radio triggering mode Elinchrom Skyport | Yes (optional) | |
| Radio triggering mode Phottix | Yes (optional) | |
| Flash duration analysis mode | Yes | |
| HSS mode | Yes |
Measuring Range(ISO100)
| Ambient | Incident | EV | -5 to 22.9 |
| Reflected | EV | -1 to 24.4 | |
| Option VF 1deg. | EV | No | |
| Option VF 5 deg. | EV | No | |
| Option VF 10 deg. | EV | No | |
| Illuminance | LUX | 0.1 to 2,000,000 lx | |
| FC(Foot-Candle) | 0.01 to 180,000 fc | ||
| Luminance | Cd/m2 | 0.1 to 980,000 cd/m2 | |
| FL(Foot-Lambert) | 0.03 to 290,000 fl | ||
| Flash | Incident | F | F0.5 to F161.2(=128.9) |
| Reflected | F | F1.0 to F161.2(=128.9) | |
| Option VF 1 deg. | F | No | |
| Option VF 5 deg. | F | No | |
| Option VF 10 deg. | F | No |
Display Range
| ISO Sensitivity | ISO | 3 to 13,107,200 | |
| ISO 2 | No | ||
| Ambient | Aperture | Digital | F0.5 to 161.2(=128.9) |
| Step | 1, 1/2, 1/3AV | ||
| Decimal fraction | 0 to 0.9(digital) | ||
| Step | 1/10AV | ||
| Analog dot scale | Ｆ1.0 to 90 | ||
| Step | 1/3 AV | ||
| Shutter speed | Digital | 30m to 1/64,000s | |
| Step | 1, 1/2, 1/3 TV | ||
| Analog dot scale | 4s to 1/2,000s | ||
| Step | 1/3 AV | ||
| Frame Rate | Digital | 1 to 1,000 f/s | |
| EV | Digital | -73.9 to 103.8 for incident -69.9 to 105.3 for reflected |
|
| Analog dot scale | -3.0 to +3.0 EV for incident -7.0 to +7.0 EV for reflected |
||
| Step | 1/3 EV | ||
| Lux | Digital | 0.1 to 2,000,000 lx | |
| Step | 2 significant digits | ||
| Analog dot scale | 0 to 1,000 lx | ||
| Step | in 50 lx | ||
| Analog dot scale | 0 to 5,000 lx | ||
| Step | in 250 lx | ||
| Analog dot scale | 0 to 25,000 lx | ||
| Step | in 2,500 lx | ||
| FC(Foot-candle) | Digital | 0.01 to 180,000 fc | |
| Step | 2 significant digits | ||
| Analog dot scale | 0 to 100 fc | ||
| Step | in 5 fc | ||
| Analog dot scale | 0 to 500 fc | ||
| Step | in 25 fc | ||
| Analog dot scale | 0 to 5,000 fc | ||
| Step | in 250 fc | ||
| Cd/m2 | Digital | 0.1 to 980,000 cd/m2 | |
| Step | 2 significant digits | ||
| Analog dot scale | 0 to 50 cd/m2 | ||
| Step | in 2.5 cd/m2 | ||
| Analog dot scale | 0 to 250 cd/m2 | ||
| Step | in 12.5 cd/m2 | ||
| Analog dot scale | 0 to 2,500 cd/m2 | ||
| Step | in 125 cd/m2 | ||
| FL(Foot-lambert) | Digital | 0.03 to 290,000 fl | |
| Step | 2 significant digits | ||
| Analog dot scale | 0 to 20 fl | ||
| Step | in 1 fl | ||
| Analog dot scale | 0 to 100 fl | ||
| Step | in 5 fl | ||
| Analog dot scale | 0 to 1,000 fl | ||
| Step | in 50 fl | ||
| Flash | Aperture | Digital | F0.5 to 161.2(=128.9) |
| Step | 1, 1/2, 1/3AV | ||
| Analog dot scale | F0.1 to 90 | ||
| Step | 1/3 AV | ||
| Shutter speed | Digital | 30m to 1/16,000s | |
| Step | 1, 1/2, 1/3TV | ||
| EV | Digital | No | |
| Analog dot scale | -3.0 to +3.0 EV for incident -7.0 to +7.0 EV for reflected |
||
| Step | 1/3 EV | ||
| Flash duration | Digital | 1/40 to 1/55,500（25ms to 18us） |
Setting Range
| ISO Sensitivity | ISO | 3 to 13,107,200 plus 850 | |
| Step | 1/3 SV | ||
| ISO 2 | No | ||
| Step | No | ||
| Ambient | Aperture | F | F0.5 to 161 |
| Step | 1, 1/2, 1/3AV | ||
| Shutter speed | T | 30m to 1/64,000s plus 1/200, 1/400s |
|
| Step | 1, 1/2, 1/3TV | ||
| Shutter angle | degrees | 1 to 358 deg. plus other 20 settings (customized from 0.001 to 360) | |
| Frame Rate | frame per second | 1, 2, 3, 4, 6, 8, 10, 12, 14, 15, 16, 18, 20, 23.976, 24, 25, 29.97, 30, 32, 36, 40, 47.952, 48, 50, 59.94, 60, 64, 72, 75, 90, 96, 100, 120, 125, 128, 150, 180, 200, 240, 250, 256, 300, 360, 375, 500, 625, 750, 1000 plus other 20 settings (customized from 0.001 to 99,999.999) | |
| Flash | Shutter speed | T | 30m to 1/16,000s plus 1/75, 1/80, 1/90, 1/100, 1/200, 1/400s |
| Step | 1, 1/2, 1/3TV | ||
| Flash duration | t value | 0.1 to 0.9 (in 0.1 step) |
Functions
| Multiple cumulative | Yes(Unlimited) |
| Average | Yes |
| Shadow | No |
| High light | No |
| Zone System | No |
| Flash Analyzing | Yes(in 10% step) |
| Memory | Yes(9 times) both incident and spot |
| Memory clear | Yes (individually) |
| Contrast Function | Yes(+/-9.9EV in 1/10 step) |
| Film memory (ISO 2) | No |
| Filter compensation | Yes(-12 to 12EV) |
| Filter factor number compensation | Yes (preset 24 types plus 6 settings) |
| External receptor jack | No |
| USB port | Yes |
| Battery check | Yes |
| Auto power off | Yes (selectable.) |
| Under/Over exposure display | Yes |
| Exposure Warning Indicator | Yes |
| Exposure compensation | Yes(-9.9 to +9.9) |
| Calibration compensation | Yes(-1.0 to +1.0) |
| Exposure Profile | Yes |
| Dip switch (L-358/608) | No |
| Custom settings | Yes (17 items) |
| Synchro terminal | Yes |
| LCD backlight | Yes |
| Water registance | Yes |
| Switching incident/reflected | Yes (software) |
| Retractable lumisphere | Yes |
| Setting lock | Yes (Touch panel) |
| How to change setting | Touch panel operation |
| Diopter adjustment | Yes (-1 to 2.5 D) |
| Tripod socket | Yes |
Others
| Operating temperature | -10 to 50℃ |
| Storage temperature | -20 to 60℃ |
| Power source | 1.5V x 2 (AA battery) and USB bus power |
| Weight | 10.58 oz. (300 g) |
| Dimensions (W x H x D) | 3.7 x 6.94 x 1.94 in. (93.9 x 176.3 x 49.4 mm) |
| LCD | 2.4" color dot matrix LCD |
Standard Accessory
| USB cable | No |
| CD-rom with Software & Manual | No (download from website) |
| Sticker for multi-key &/or CS operation | No |
| Quick Guide / Start Up Guide | Yes |
| Lens Cap | Yes |
| Strap | Yes |
| Synchro terminal cap | Yes (built-in) |
| Soft case | Yes |
| Anti glare film | Yes |
Optional Accessory supplied
| Booster | No |
| Mini light receptor | No |
| Viewfinder | No |
| Lumishphere | Yes |
| Lumidisc | Yes (same as Lumisphere) |
| Lumigrid | No |
| ND diffuser | No |
| Pin point receptor | No |
| Spot mask | No |
| Synchro cord | Yes |
| Radio wave triggering system | Yes |
| Step-up ring | Yes |
| 18% Gray card (folded) | Yes |
| Exposure Profile Target / II | Yes |
Item Includes
| Start-up Guide, Strap, Lens Cap (Installed on the meter), Soft Case, Anti-glare sheet for LCD Screen, Safety precaution guide, USA warranty Card, 2AA batteries are not included |
