Kupo Ku-Hand Grip Gloves, Goatskin - Medium, Black KG086013
$ 35.95
Kupo Ku-Hand Grip Gloves, Goatskin - Medium, Black KG086013
Kupo Kupole Drop Ceiling Adapter KD301612
$ 39.95
This adapter allows you to use your Kupoles with drop ceilings. The adapter will clip on to the metal grid that supports the ceiling tiles and the other side presses into the top of the Kupole to secure it in place.
Kupo Kupole Extends from 100cm (39.4-Inch) to 170cm (66.9-Inch) - Silver, KD1...
$ 114.95
Kupo Kupole Extends from 100cm (39.4-Inch) to 170cm (66.9-Inch) - Silver, KD1...
Kupo Kupole Extends from 150cm (59.0-Inch) to 270cm (106.3-Inch) - Black, KD1...
$ 131.95
Kupo Kupole Extends from 150cm (59.0-Inch) to 270cm (106.3-Inch) - Black, KD1...
Kupo Kupole Extends from 150cm (59.0-Inch) to 270cm (106.3-Inch) - Silver, KD...
$ 131.95
Kupo Kupole Extends from 150cm (59.0-Inch) to 270cm (106.3-Inch) - Silver, KD...
Kupo Kupole Extends from 210cm (82.7 Inches) to 370cm (145.0 Inches) - Black,...
$ 142.95
Kupo Kupole Extends from 210cm (82.7 Inches) to 370cm (145.0 Inches) - Black,...
Kupo Kupole Extends from 210cm (82.7 Inches) to 370cm (145.0 Inches) - Silver...
$ 142.95
Kupo Kupole Extends from 210cm (82.7 Inches) to 370cm (145.0 Inches) - Silver...
Kupo Kupole Extension 6.6 Feet (2.0m) - Black KD200911
$ 47.95
Kupo Kupole Extension 6.6 Feet (2.0m) - Black KD200911
Kupo Kupole Extension 6.6 Feet (2.0m) - Silver KD201012
$ 47.95
Kupo Kupole Extension 6.6 Feet (2.0m) - Silver KD201012
Kupo Kupole Rubber Bottom Pad, Black KD103411
$ 7.49
This is a replacement bottom pad for the black Kupoles.
Kupo Kupole Rubber Top Pad, Black KD103311
$ 7.49
This is a replacement top pad for the black Kupoles.
Kupo Kupole Top Pad Cover, White KD103012
$ 1.09
This pad keeps you from leaving a circular mark from a dirty rubber pad on your nice clean ceilings. It’s always good to have extra ones when using in a client’s home so that the only mark you leave behind is a good impression!
Kupo Kupole Tripod Base KD200412
$ 96.95
The Kupole Tripod Base allows you to use your Kupoles in a free standing environment where a solid ceiling surface may be too high to reach, too fragile such as with a drop ceiling or even outdoors.
Kupo Large Gaffer Grip, KG500511
$ 70.95
The Gaffer Grips are quick mount, multi-purpose clamps that will grab on most surfaces flat or round. They reinvent the standard spring clamp by adding strength and versatility. The Large Gaffer Grip is outfitted with a variable tension control knob and comes with a long removable baby 5/8 (16mm) pin mounted in a female baby 5/8 (16mm) receiver. If you're looking for a rapid, down and dirty way to mount a lighting fixture, the Gaffer Grips are always willing and able. The KG500511 jaws can be adjusted from 1/4 to 3-1/8 (0.63-7.93cm) and is clad in a stealthy black finish.
Kupo Low Mighty Baby Stand KS101212
$ 143.95
If you need to support a heavy fixture low to the ground, this small stainless steel brute will handle the load.
Kupo Low Mighty Stand, KS300312
$ 242.95
The KS300312 Low Mighty Stand offers you superior strength without excess height. When you need to position a heavy piece of gear weighing up to 77.2 lbs (35 Kg), anywhere between 36.2 - 80.7 in height (92 - 205cm), this little brute will get the job done. The KS300312 also features the triple function universal combo head with both 1-1/8 (28mm) and 5/8 (16mm) receivers plus a multi-direction 5/8 (16mm) stud to accept any kind of mounting challenge. The KS300312 features a leveling leg that enables the user to extend one leg more than the others to level out the stand on an incline or uneven terrain. It also comes in handy on some stairs! These stands would be ideal for low mounting position for a large Fresnel or an extra support on the bottom bar of a butterfly frame.
Kupo Master Cine Stand, KS500112
$ 265.95 - Sold Out
The KS500112 Master Cine Stand gives you the ultimate combination of strength and features. The solid steel construction has a maximum load capacity of 88.2 lbs (40 Kg) The KS500112 also features the triple function universal combo head with both 1-1/8 (28mm) and 5/8 (16mm) receivers plus a multi-direction 5/8 (16mm) stud to accept any kind of mounting challenge. The KS500112 also has a leveling leg. A leveling leg is a feature that enables the user to extend one leg more than the others to level out the stand on an incline or uneven terrain. It also comes in handy on some stairs! Whether you are mounting a boom, large HMI or a green screen, this cine stand can support just about anything 128 (3.25m) high above the ground.
Kupo Master Combo Alu Senior Stand, KS200511
$ 160.95
The Master Combo Alu Senior has all the features you'd expect in a combo stand but in a lighter weight aluminum package. The KS200511 only weighs in at 6.6 lbs (3 Kg) and gives you the flexibility of the triple function universal combo head with both 1-1/8 (28mm) and 5/8 (16mm) receivers plus a multi-direction 5/8 (16mm) stud. The KS200511 also features a leveling leg that enables the user to extend one leg more than the others to level out the stand on an incline or uneven terrain. It also comes in handy on some stairs! When it comes to function being a featherweight, the Master Combo Alu Senior is a great choice.
Kupo Master Combo HD Stand, KS200112
$ 212.95
The KS200112 Master Combo HD Stand is a chrome plated steel combo stand with a load capacity of 88.2 lbs (40 Kg). Combo stands get their name because of their unique head design. The KS200112 features the triple function universal combo head with both 1-1/8 (28mm) and 5/8 (16mm) receivers plus a multi-direction 5/8 (16mm) stud, giving you great versatility when it comes to mounting options. The features a leveling leg that enables the user to extend one leg more than the others to level out the stand on an incline or uneven terrain. It also comes in handy on some stairs! Each riser is spring cushioned as a safety feature to protect lighting fixtures from a sudden drop if the locking collar becomes loose. When it comes to strength and flexibility the KS200112 has no equal.
Kupo Master High Cine Stand, KS500412
$ 276.95
The big brother of the KS500112 Master Cine Stand, the KS500412 Master Cine Stand gives you the ultimate combination of strength and features. The solid steel construction has a maximum load capacity of 88.2 lbs (40 Kg) The KS500412 also features the triple function universal combo head with both 1-1/8 (28mm) and 5/8 (16mm) receivers plus a multi-direction 5/8 (16mm) stud to accept any kind of mounting challenge. The KS500412 features a leveling leg that enables the user to extend one leg more than the others to level out the stand on an incline or uneven terrain. It also comes in handy on some stairs! Whether you are mounting a boom, large HMI or a green screen, this cine stand can support just about anything high above the ground. Due to the increased height, this light stand features a slightly larger footprint diameter and weighs just 2.2 lbs (1 Kg) more.
Kupo Max Arm with Hand Wheel KG100911
$ 102.95
The Max Arm with Hand Wheel is identical to the Max Arm with Adjustable Handle (KG100211) except it has a big hand wheel to adjust the tension as opposed to the ratcheted handle.
Kupo Max Arm, KG100211
$ 102.95
The Max arm is specially designed for lighting, video, film and photography. It's an adjustable arm that allows you to position a camera, lighting fixture or accessory in any position within seconds! The two 5/8 (16mm) studs at either end are attached to ball joints rotate 360 degrees, plus a cut-out in the sleeve surrounding the joint allows the stud to be bent at a 90 degree angle. One stud is tapped to receive a 3/8 -16 thread, while the other is tapped to receive 1/4 - 20 thread. Each stud has six milled flat surfaces, so whatever you mount on the Max Arm will not rotate. The central elbow rotates 360 degrees for infinite adjustability. The Max Arm is equipped with user-replaceable special friction discs with anti-slip rosettes prevent unwanted movement. The adjustable ratcheted handle slowly increases tension until all three joints lock at once making precise positioning a breeze.
Kupo Midi Pro Stand with Air Cushion, KS040511
$ 84.95
Kupo Midi Pro Stand with Air Cushion, KS040511
Kupo Mini Alli Clamp - Silver, KG301712
$ 18.19
Kupo Mini Alli Clamp - Silver, KG301712
Kupo Mini Flex Arm with Alligator Clip, KD700912
$ 28.95
The KD700912 is a mini flex arm with a 3/8-16 female thread inside a baby 5/8 (16mm) adapter on one side and an alligator clip on the other. It's the perfect accessory to hold small items such as a mini flag or reflector. The KD700912 is 11.4 (29mm) in length.
Kupo Mitchell Round Mounting Plate With 1-1/8In (28Mm) Junior Receiver
$ 118.95
Kupo Mitchell Round Mounting Plate With 1-1/8In (28Mm) Junior Receiver
Mfr SKU: KG009012 | Helix SKU: KUKG009012
Overview:
Chrome plated steel adapter, the Mitchell round plate allows for attachment to a Mitchell threaded collar for a 1-1/8in (28mm) junior receiver.
Features:
- Chrome plated steel
- Mitchell round plate allows for attachment to a Mitchell threaded collar for a 1-1/8in (28mm) junior receiver
- The 28mm junior receiver is welded onto a round plate, which enhances the strength
- Mitchell Castle Nut is included
- Mitchell Castle Nut comes with four stainless steel spacers and are 1in length, which can lock easily by hand or wrench
Specifications:
- Color: Silver
- Material - Primary: Steel
- Product Height: 6.57in / 16.7cm
- Product Length: 5.28in / 13.4cm
- Product Width: 5.28in / 13.4cm
- Product Weight: 5.33lb / 2.42kg
- Riser 1 Diameter: 0.98in / 25.0mm
- Riser 2 Diameter: 1.18in / 30.0mm
- Riser 3 Diameter: 1.38in / 35.0mm
- Sections: 3
- Stand Adapter Type: Mitchell to 28mm Receiver
- Leg Diameter: 1.02in / 26.0mm
- Risers: 2
- Riser 4 Diameter: 0.0in / 0.0mm
- Riser 5 Diameter: 0.0in / 0.0mm
Kupo Off Camera Flash Alli Clamp KG302511
$ 69.95
This incredibly handy accessory consists of an Alli Clamp with a mini ball head and hot shoe enabling the user to mount and position an on-camera flash virtually anywhere in seconds!
Kupo Owl Cable Clips 1.6 - 2.0 Inches (40-50mm), 4 Pack KG086512
$ 5.39
Kupo Owl Cable Clips 1.6 - 2.0 Inches (40-50mm), 4 Pack KG086512
Kupo Paper Background Drive Chain Weight, Black KG084811
$ 8.19
This is a replacement Chain Weight for the Background Paper Drive Set (KG084411).
Kupo Paper Drive Baby Stand Adapter KG084911
$ 41.95
This is a pair of adapters designed to hold a Background Paper Drive Set (KG084411) outfitted with baby 5/8" (16mm) receiver to be mounted on any light stand or accessory with a baby pin.
Kupo Petite Clamp for Baby for 5/8 Inches (16mm) Tubing KG600712
$ 26.95
The Petite Clamp uses accessories from the 3 &; 4 Way Clamp system and allows you to mount them easily onto any grip arm or 5/8" (16mm) tubing
Kupo Photo Baby Boom - Black Aluminum, KG601711
$ 110.95
A boom is an essential tool for positioning a light fixture either directly above the photographer, videographer or cinematographer to create a beautiful flat light, or positioned above the subject acting as a hair light. This lightweight aluminum all-metal construction features an ear that is designed to fit between the plates of a grip head. It features a built in hook at the tail end for adding sandbags for counter-weight. This boom extends from 3.8 -7.8' (1.1 -2.4m) and will support 6.6 lbs (3 Kg) when fully extended. The Aluminum Baby Boom comes in a stealthy black finish.
Kupo Pincer Clamp with 3/8-Inch-16F & 1/4-Inch-20F, KG702711
$ 25.00
The Pincer Clamp is a mini version of the Convi Clamp that's super lightweight and compact only weighing 4.58 oz (130 g). The specially formulated pads that line the jaws provide a strong grip on round and rectangular shapes. The Pincer Clamp is tapped with both 1/4'' and 3/8'' threads, ideal for mounting all cameras, lights, monitors and accessories weighing up to 11 lbs (5 Kg).
Kupo Plastic Background Drive Set Chain KG084711
$ 17.95
This is a replacement plastic chain for the Background Paper Drive Set (KG084411).
Kupo Professional Sand Bag 13.2LBS KG083011
$ 36.95 - Sold Out
Kupo Professional Sand Bag 13.2LBS KG083011
Kupo Professional Sand Bag 22.4LBS KG083411
$ 48.95 - Sold Out
Kupo Professional Sand Bag 22.4LBS KG083411
Kupo Round Stud with 3/8 Inches-16 F and 1/4 Inches
$ 5.29
Kupo Round Stud with 3/8 Inches-16 F and 1/4 Inches
Kupo Round Stud with 3/8 Inches-16M and 1/4 Inches-20M KG000912
$ 6.39
Kupo Round Stud with 3/8 Inches-16M and 1/4 Inches-20M KG000912
Kupo Runway Stand Base KS301012
$ 110.95
This base with braked wheels features a junior (1-1/8" - 28mm) receiver and the legs fold parallel to one another for easy transport and storage. Perfect for taking your Master C Stand riser columns mobile.
Kupo Scraper with Baby 5/8-Inch (16mm) Stud, KG003812
$ 17.00
The Scraper is stiff bladed putty knife with a built in baby 5/8 (16mm) stud. The 0.04 (1.1mm) thin metal blade is designed for jamming into the gap between a door and its frame, placed under a stack of books or between two books on a shelf, clamped to a ladder step, etc. The baby 5/8 (16mm) stud has a safety indentation for securely hanging small lighting fixtures. There are three holes drilled into the blade designed as anchor points for mounting by screws or nails.
Kupo Shelf Support "L" Bracket, Black (Set of Two) KD703611
$ 20.19
These Convi Clamp accessories are right angle brackets with a hex stud mounted to one side. They are perfect for mounting flat objects such as a piece of wood or glass to a pair of Kupoles to be used as a table to support items for photography, to be used as a shelf to store items or an elegant display in a home or retail environment.
Kupo Shoulder Strap for Click Stands KG080812
$ 8.49 - Sold Out
Kupo Shoulder Strap for Click Stands KG080812
Kupo Single Hook Set for Background Paper Drive KG084511
$ 23.95
This set of hooks is designed to be used with a pair of Convi Clamps and a Background Paper Drive Set to support one roll of seamless paper.
