The NTG4 builds on the platform created by RØDE's award-winning NTG1 shotgun microphone. A broadcast-quality directional condenser microphone designed to provide premium audio recording in a versatile range of applications including on-camera and boom mounted.
|Acoustic Principle||Line Gradient|
|Frequency Range||20Hz - 20kHz(selected HPF @75Hz)|
|Maximum SPL||135dB SPL (@ 1kHz, 1% THD into 1KΩ load)|
|Sensitivity||-32.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz|
|Equivalent Noise Level (A-weighted)||16dB-A|
+12V phantom power required from mixer or interface
|Dimensions||225mmH x 22mmW x 22mmD|
|Warranty||1 year with free extension to 10 years following registration|
ProMaster SKU: 8069 | Helix SKU: PR8069
The ProMaster SGM1 Compact Shotgun Microphone concentrates your camera's audio on the subject while reducing distracting, surrounding noise. Your videos will have clearer, more understandable sound.
The SGM1's compact design makes it easy to store in your camera bag. It balances well even on smaller cameras. The aluminum housing and gold contacts are designed for quality and durability to provide years of great sound for all your videos.
- 1 SGM1 compact directional shotgun microphone
- 1 Shoe-mount microphone holder for camera-top mounting
- 1 Coiled 3.5 mm to 3.5 mm male audio connection cable
- 2 Foam windscreens
- 1 AA battery
- Frequency response: 30-18,000Hz
- Sensitivity: -40dB (0dB=1V/Pa at 1KHz)
- Direction: Unidirectional
- Polar pattern: Cardioid
- Output impedance: 200ohms
- Signal to noise ratio: 76dB (1KHz at 1 Pa)
- Max SPL (sound pressure level): 120dB (at 1KHzs 1% T.H.D.)
- Power: 1.5V AA
- Length of coiled cable: 25 cm, strechable to 50 cm
- Dimensions: 185 mm x 22 mm / 7 3/16" x 7/8" (microphone body only)
- Weight: 75 g / 2 5/8 oz (not including battery, windscreen or cable)
The RØDE Blimp is a complete windshield and shock mounting accessory for the NTG1, NTG2, NTG3, NTG4 and NTG4+ microphones, as well as any third party shotgun microphone up to 325mm (12 ¾”) in length. Now featuring the Rycote® Lyre suspension system, the Blimp provides the ultimate in microphone suspension and isolation. Constructed from a single piece of hard-wearing thermoplastic, the Lyre provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap. The Blimp’s handle has also been completely redesigned, reducing the product weight significantly, while increasing the ergonomics for handheld use. Housed inside the grip is a heavy-duty Mogami cable which splits via a junction box to a highly-flexible thin cable inside the Blimp, to minimise the transference of vibration to the microphone. With the lightweight design of the handle and suspension system the new Blimp design is over 25% lighter (550gm without microphone or DeadWombat fitted). The Blimp attaches to any standard boompole via 3/8" thread attachment at the base. The Universal Blimp Mount is available as an option to remove the handle when the Blimp is being used primarily on a boompole to reduce weight. The Dead Wombat windshield, caring brush and tail/patch cable are included. The added confidence of a full ten year warranty* ensures that the Blimp is by far the best microphone windshield system available, further evidenced by a 2009 Red Dot Award and Australian International Design Award for outstanding product design. *Excludes normal wear and tear of Dead Wombat furry cover or any misuse, modification or improper storage and transportation of the product.
|Dimensions||285.00mmH x 490.00mmW x 125.00mmD|
|Warranty||10 year warranty|
The DeadCat GO is a furry wind cover for the VideoMic GO, designed for use in windy environments. Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent.