ProMaster Air Support Monopod AS425
$ 109.95 - Sold Out
ProMaster Air Support Monopod AS425
ProMaster SKU: 5121 | Helix SKU: PR51211
Overview
Lightning-fast height adjustment without the need for traditional leg locks.
ProMaster's Air Support Monopod is lightning fast to deploy and adjust. Just pull to extend it or squeeze two buttons to retract it. Unlike a traditional monopod, the ProMaster Air Support requires no leg locks. Its unique air pressure system saves time and even allows you to fine-tune the height while shooting!
This Kit includes a folding, 3-leg base as well as a soft monopod foot and a fabric storage case.
Use the 3-leg base for the best stability. A ball joint is built into the 3-leg base which allows the monopod to pan and tilt. This ball joint can be locked so the unit will not tilt but can still pan. The legs of the base can be folded-up for easy transport. A soft foot is attached to the bottom of the 3-leg base for use when the legs are folded. Additionally, the soft foot can be installed directly on to the monopod when the 3-leg base is removed. This creates a smaller, lighter rig with a more traditional, single-foot.
The main connection at the top of the Air Support is a reversible bolt that can be used to attach a camera or head. One side of the bolt is a ¼”-16 thread which is common to most cameras and some heads. The opposite side is a larger 3/8”-16 thread which is common to many heads.
The AS425 is a 4-section monopod kit with a maximum working height of 62 3/4" and a maximum load rating of 8 lbs. 13 oz. It collapses down to 24” (with the 3-leg base installed) for easy transport. For more information see the specifications section of this listing.
Key Features:
- Rapid Height Adjustment, no leg locks to fuss with
- Convertible between 3-leg base and single-foot monopod
- 3-leg base has a built-in ball joint for smooth panning and tilting
- Ball joint lock allows for smooth, even panning without tilt
- Reversible 1/4"-20 / 3/8"-16 bolt for attaching a camera or head
Specifications
Specifications
Kit Specifications
| Maximum Working Height: | 62 3/4" / 159.4 cm |
| Minimum Working Height: | 24 3/4" / 62.9 cm |
| Folded Length: | 24" / 61 cm |
| Maximum Load: | 8 lbs 13 oz / 4 kg |
| Material: | Aluminum |
| Sections: | 4 |
| Weight: | 2 lbs 1/2 oz / 0.92 kg |
Monopod Specifications
| Maximum Working Height: | 59 1/4" / 150.5 cm |
| Minimum Working Height: | 21" / 53.3 cm |
| Closed Length: | 21" / 53.3 cm |
| Weight: | 1 lb 2 oz / 0.51 kg |
Base Specifications
| Height: | 4 1/2" / 11.4 cm |
| Closed Length: | 9 1/8" / 23.2 cm |
| Weight: | 14 1/2 oz / 0.41 kg |
Note: Kit specifications are with 3-leg base installed & soft foot
Note: Monopod specifications are with soft foot installed.
Item Includes
Includes:
- AS425 Monopod
- 3-Leg, Folding Base
- Soft Monopod Foot
- Fabric Storage Case
ProMaster Air Support Monopod AS431
$ 134.95 - Sold Out
ProMaster Air Support Monopod AS431
ProMaster SKU: 5122 | Helix SKU: PR51228
Overview
Lightning-fast height adjustment without the need for traditional leg locks.
ProMaster's Air Support Monopod is lightning fast to deploy and adjust. Just pull to extend it or squeeze two buttons to retract it. Unlike a traditional monopod, the ProMaster Air Support requires no leg locks. Its unique air pressure system saves time and even allows you to fine-tune the height while shooting!
This Kit includes a folding, 3-leg base as well as a soft monopod foot and a fabric storage case.
Use the 3-leg base for the best stability. A ball joint is built into the 3-leg base which allows the monopod to pan and tilt. This ball joint can be locked so the unit will not tilt but can still pan. The legs of the base can be folded-up for easy transport. A soft foot is attached to the bottom of the 3-leg base for use when the legs are folded. Additionally, the soft foot can be installed directly on to the monopod when the 3-leg base is removed. This creates a smaller, lighter rig with a more traditional, single-foot.
The main connection at the top of the Air Support is a reversible bolt that can be used to attach a camera or head. One side of the bolt is a ¼”-16 thread which is common to most cameras and some heads. The opposite side is a larger 3/8”-16 thread which is common to many heads.
The AS431 is a 4-section monopod kit with a maximum working height of 63 1/2" and a maximum load rating of 15 lbs 7 oz. It collapses down to 24 1/8” (with the 3-leg base installed) for easy transport. For more information see the specifications section of this listing.
Key Features:
- Rapid Height Adjustment, no leg locks to fuss with
- Convertible between 3-leg base and single-foot monopod
- 3-leg base has a built-in ball joint for smooth panning and tilting
- Ball joint lock allows for smooth, even panning without tilt
- Reversible 1/4"-20 / 3/8"-16 bolt for attaching a camera or head
Specifications
Specifications
Kit Specifications
| Maximum Working Height: | 63 1/2" / 161.3 cm |
| Minimum Working Height: | 24 7/8" / 63.2 cm |
| Folded Length: | 24 1/8" / 61.3 cm |
| Maximum Load: | 15 lbs 7 oz / 7 kg |
| Material: | Aluminum |
| Sections: | 4 |
| Weight: | 2 lbs 4 1/2 oz / 1.03 kg |
Monopod Specifications
| Maximum Working Height: | 60" / 152.4 cm |
| Minimum Working Height: | 21 1/4" / 54 cm |
| Closed Length: | 21 1/4" / 54 cm |
| Weight: | 1 lb 6 oz / 0.62 kg |
Base Specifications
| Height: | 4 1/2" / 11.4 cm |
| Closed Length: | 9 1/8" / 23.2 cm |
| Weight: | 14 1/2 oz / 0.41 kg |
Note: Kit specifications are with 3-leg base installed & soft foot
Note: Monopod specifications are with soft foot installed.
Item Includes
Includes:
- AS431 Monopod
- 3-Leg, Folding Base
- Soft Monopod Foot
- Fabric Storage Case
ProMaster GH11 Gimbal Head
$ 179.95
ProMaster GH11 Gimbal Head
ProMaster SKU: 4756 | Helix SKU: PR47566
Overview
The ProMaster GH11 Gimbal is a lightweight, precision head with amazing versatility. Not only is it a terrific means of balancing a long, telephoto lens while making swift movements; but it is a terrific videography companion too. The unique smooth-control handle forms a leverage point for excepetional maneuverability in tracking moving objects and capturing video footage. Tension is controlled at both the arm and the base of the GH11. And the dovetail quick release system (arca-type) is highly compatible with a variety of plates, brackets, and lenses.
Specifications
- Dimensions: 7 7/8" H x 8 1/4" W x 3" D (20 cm x 21 cm x 7.6 cm)
- Weight: 1 lb 12 1/2 oz (808 grams)
- Maximum load: 13 lbs 4 oz / 6 kg
- Cold weather performance: -13 F / -25 C
* Note: Dimensions and weight do not include QR plate or smooth-control handle
Item Includes
Includes:- 1 GH11 Gimbal Head
- 1 Smooth-control Handle
- 1 6210 Quick Release Plate
- 1 Soft fabric carry case with shoulder strap
ProMaster Professional MP528 Aluminum Monopod
$ 79.95
ProMaster Professional MP528 Aluminum Monopod
ProMaster SKU: 3564 | Helix SKU: PR3564
Overview
The ProMaster MP528 monopod is super strong and stable yet light enough to take with you anywhere. It is terrific for sports shooters, nature enthusiasts or anyone who requires versatile, lightweight support for their camera. Available in a carbon fiber version as well which, unbelievably, shaves off even more weight.
Specifications
| Monopod Material | Aluminium |
| Sections | 5-Section (28mm) |
| Sections Lock Style | Twist Lock |
| Maximum Working Height | 63" (160cm) |
| Folded Length | 17 ½'' (44cm) |
| Maximum Load | 13lbs (6kg) |
| Monopod Weight | 17.6oz (.5kg) |
| Mounting | Reversible ¼-20 / 3/8'' Mounting Thread |
| Spiked/Retractable Feet | Yes |
Item Includes
1 Qty: Storage/Carry Pouch
ProMaster Professional MPH528 Aluminum Monopod with Head
$ 119.95
ProMaster Professional MPH528 Aluminum Monopod with Head
ProMaster SKU: 4485 | Helix SKU: PR44855
Overview
The ProMaster MPH528 (N) Monopod represents the highest standards of form and function. It is constructed from rugged anodized aluminum and features a comfortable grip, fully adjustable leg, and closes to a compact size for carrying case. The precision head allows for precise vertical and horizontal alighnment along with ultra smooth panning.
For Use With:
+ SLR Cameras with standard or telephoto lens
+ Point and shoot cameras
+ Video cameras
Specifications
- 90° left and right lateral adjustment
- 360° panning with tension adjustment
- Maximum Working Height: 66 15/16" / 170cm
- Folded Length: 21-1/4" / 54cm
- Maximum Load: 13 lbs / 6 kg
- Monopod Weight: 29.3 oz / 0.83 kg
- 28mm 5-section aluminum leg
- Reversible 1/4˝-20 / 3/8˝ mounting thread
- Position of the quick release receiver on the head can be switched by 90 degrees
- Uses Quick Release Plate #7218
Item Includes
ProMaster Professional MPV428+ Monopod
$ 109.95
ProMaster Professional MPV428+ Monopod
ProMaster SKU: 5619 | Helix SKU: PR5619
Overview
The ProMaster MPV428+ Monopod is a great solution for both videography and still photography. Its retractable base incorporates a ball joint with tension lock to provide smooth, easy movements. It has three points of contact for great stability on a variety of surfaces.
The base is also removable, allowing the MPV428+ to convert to a traditional monopod with single, rubber foot. The innovative PROlocks allow for quick opening and powerful closing of the monopod sections with one hand.
Specifications
- Maximum Working Height: 64" / 162.5 cm
- Minimum Working Height: 19.5" / 49.5 cm
- Folded Length: 21 1/4" / 53.9 cm
- Maximum Load: 13 lb / 6 kg
- Monopod Weight: 1 lb 9 oz / .71 kg
- 4-Section 28mm Aluminum Leg
- Reversible 1/4-20 / 3/8" mounting thread
ProMaster Professional MPV432+ Monopod
$ 129.95 - Sold Out
ProMaster Professional MPV432+ Monopod
ProMaster SKU: 5612 | Helix SKU: PR5612
Overview
The ProMaster MPV432+ Monopod is a great solution for both videography and still photography. Its retractable base incorporates a ball joint with tension lock to provide smooth, easy movements.
It has three points of contact for great stability on a variety of surfaces. The base is also removable, allowing the MPV432+ to convert to a traditional monopod with single, rubber foot. The innovative PROlocks allow for quick opening and powerful closing of the monopod sections with one hand. Carry case included.
Specifications
- Maximum Working Height: 67 1/4" / 170.8 cm
- Minimum Working Height: 20 1/8" / 51.1 cm
- Folded Length: 21 7/8" 55.5 cm
- Maximum Load: 15 lb / 7 kg
- Monopod Weight: 1 lb 14 oz / 0.85 kg
- 4-Section 32mm Aluminum Leg
- Reversible 1/4-20 / 3/8" mounting thread
ProMaster SC426K Tripod with Ball Head
$ 109.95
ProMaster SC426K Tripod with Ball Head
ProMaster SKU: 5172 | Helix SKU: PR5172
Overview
The ProMaster Scout Tripod has features carefully chosen and designed for the active photographer. Its 4-section legs can be independently spread and adjusted at multiple angles and heights so you can level your camera on uneven ground. The center column has a retractable weight hook so you can add stability, especially in windy situations. The column can be separated into two parts so the Scout can get your camera down to ground level, perfect for macro photography and/or a unique compositional perspective.
The ProMaster Scout Tripod's ball head operates smoothly, and incorporates the ProMaster dovetail quick release system (arca-swiss compatible) so you can use the included quick release plate, an L-Bracket or a host of other compatible accessories.
The ProMaster Scout Tripod is a pleasure to use so you can enjoy photography even more while advancing your skills.
Kit Specifications
- Maximum Working Height: 67" / 170.3 cm
- Maximum Height with column down: 54" / 137.2 cm
- Minimum Working Height: 5 3/8" / 13.7 cm (legs flat on ground)
- Minimum Working Height: 10 3/4" / 27.3 cm (legs in lowest locked position)
- Folded Length: 18 1/2" / 47 cm
- Maximum Load: 8 lbs 13 oz / 4 kg
- Weight: 3 lbs 7/8 oz / 1.39 kg
Ballhead Specifications
- Height: 3 1/4" / 8.3 cm
- Weight: 8 3/4 oz / .25 kg
- Uses Quick Release Plate #2738
Tripod Leg Specifications
- Maximum Working Height: 63 3/4" / 162 cm
- Maximum Height with column down: 50 3/4" / 128.9 cm
- Minimum Working Height: 2 1/8" / 5.4 cm (legs flat on ground)
- Minimum Working Height: 7 1/2" / 19 cm (legs in lowest locked position)
- Folded Length: 18 1/2" / 47 cm
- Weight: 2 lbs 8 1/8 oz / 1.14 kg
ProMaster SC430K Tripod with Ball Head
$ 129.95 - Sold Out
ProMaster SC430K Tripod with Ball Head
ProMaster SKU: 5179 | Helix SKU: PR5179
Overview
The ProMaster Scout Tripod has features carefully chosen and designed for the active photographer. Its 4-section legs can be independently spread and adjusted at multiple angles and heights so you can level your camera on uneven ground. The center column has a retractable weight hook so you can add stability, especially in windy situations. The column can be separated into two parts so the Scout can get your camera down to ground level, perfect for macro photography and/or a unique compositional perspective.
The Scout ball head operates smoothly, and incorporates the ProMaster dovetail quick release system (arca-swiss compatible) so you can use the included quick release plate, an L-Bracket or a host of other compatible accessories.
The Scout is a pleasure to use so you can enjoy photography even more while advancing your skills.
Specifications
Kit Specifications
Maximum Working Height: 70 ¼” / 178.5 cm
Maximum Height with column down: 56 ½” / 143.6 cm
Minimum Working Height: 6 ¼" / 15.9 cm
Folded Length: 19 ¼” / 48.9 cm
Maximum Load: 11 lbs / 5 kg
Weight: 3 lbs 7 ¼ oz / 1.57 kg
Ballhead Specifications
Height: 3 ¼” / 8.3 cm
Weight: 8 ¾ oz / .25 kg
Uses Quick Release Plate: 2738
ProMaster Scout SC423K Tripod with Ball Head
$ 99.95
ProMaster Scout SC423K Tripod with Ball Head
ProMaster SKU: 5165 | Helix SKU: PR5165
Overview
The ProMaster Scout Tripod has features carefully chosen and designed for the active photographer. Its 4-section legs can be independently spread and adjusted at multiple angles and heights so you can level your camera on uneven ground. The center column has a retractable weight hook so you can add stability, especially in windy situations. The column can be separated into two parts so the Scout can get your camera down to ground level, perfect for macro photography and/or a unique compositional perspective.
The Scout ball head operates smoothly, and incorporates the ProMaster dovetail quick release system (arca-swiss compatible) so you can use the included quick release plate, an L-Bracket or a host of other compatible accessories.
The Scout is a pleasure to use so you can enjoy photography even more while advancing your skills.
Kit Specifications
- Maximum Working Height: 63 1/4" / 160.7 cm
- Maximum Height with column down: 51" / 129.6 cm
- Minimum Working Height: 5 1/4" / 13.4 cm (legs flat on ground)
- Minimum Working Height: 10 1/4" / 26.1 cm (legs in lowest locked position)
- Folded Length: 17 5/8" / 44.8 cm
- Maximum Load: 6 lbs 9 5/8 oz / 3 kg
- Weight: 2 lbs11 7/8 oz / 1.25 kg
Ballhead Specifications
- Height: 3 1/4" / 8.3 cm
- Weight: 8 3/4 oz / .25 kg
- Uses Quick Release Plate #2738
Tripod Leg Specifications
- Maximum Working Height: 60" / 152.4 cm
- Maximum Height with column down: 47 3/4" / 121.3 cm
- Minimum Working Height: 2" / 5.1 cm (legs flat on ground)
- Minimum Working Height: 7" / 17.8 cm (legs in lowest locked position)
- Folded Length: 17 5/8" / 44.8 cm
- Weight: 2 lbs 3 1/8 oz / 1 kg
ProMaster Scout SCM426 Aluminum Monopod
$ 49.95
ProMaster Scout SCM426 Aluminum Monopod
ProMaster SKU: 9918 | Helix SKU: PR99183
Overview
The ProMaster Scout 426 is a great everyday monopod. It uses flip-locks for quick and easy opening and closing of the 4 sections. The mounting screw is reversible so you can add a small ball head or mount your camera directly to the Scout 426. A foam grip for comfort and a wrist lanyard round out the features.
Specifications
- Maximum Working Height: 59 1/8" / 150.2 cm
- Minimum Working Height: 19 1/8" / 48.6 cm
- Folded Length: 19 3/8" / 49.2 cm
- Maximum Load: 8 lbs / 3.6 kg
- Monopod Weight: 12.25 oz / 347 g
- Sections: 4-Section (26mm, 23mm, 20mm, 19mm)
- Material: Aluminum Leg
- Camera/Head Mounting: Reversible 1/4-20 / 3/8" mounting thread
Item Includes
1 Qty: Carry/Storage Pouch.
ProMaster Scout Series SCH30 Ball Head
$ 44.95
ProMaster Scout Series SCH30 Ball Head
ProMaster SKU: 5186 | Helix SKU: PR5186
Overview
The ProMaster Scout Series Ball Head operates smoothly, and incorporates the ProMaster dovetail quick release system (arca-swiss compatible) so you can use the included quick release plate, an L Bracket, and a host of other compatible accessories. A single level adjusts the tension of both the ball and the panning control. Degree marks are etched into the base for precise rotation. And a safety mechanism in the quick release system prevents your camera from being accidentally dropped.
Specifications
- Height: 3 1/4" / 8.3 mm
- Weight: 8 3/4 oz / .25 kg
- Ball Diameter: 1 1/16" / 30 mm
- Base Diameter:
- Maximum Load: 11lbs
- Uses Quick Release Plate #2738
ProMaster Specialist Series SPH45P Ball Head
$ 139.95
ProMaster Specialist Series SPH45P Ball Head
ProMaster SKU: 8097 | Helix SKU: PR8097
Overview
The SP45P is a highly technical ball head. It has both upper and lower panning controls with degree marks. The main tension control is generously large and easy to use. Integrated into the tension control is a memory lock dial for setting a repeatable tension stop. Both a high-rise and low-profile memory lock dial are included so you have the choice of which to use. All controls on the SP45P are colored red for easy identification. The ProMaster dovetail quick release system is easy to use and is compatible with a variety of arca-swiss type quick release products.
+ Machined (not cast) from high grade aluminum. The quality of these heads is evident.
+ QR plates are arca-swiss compatible with an incorporated safety catch mechanism.
+ Knobs are a rich red color so you can easily identify touch points on the head.
+ SP heads can pan from the base or from the top platform and have engraved degree-markings. Use the lower panning base for the initial framing of a shot followed by the upper pan to rotate the camera without affecting its other positioning.
+ A large tension control knob is easy to use, even with gloves.
+ Inside of the tension control knob is a secondary knob called a Memory Lock. It sets a repeatable tension when moving the camera on the ball head.
+ Two memory lock knobs are included with the ball head. Choose the protruding Memory Lock knob for ease of adjustment or switch it for the low profile Memory Lock knob which avoids any accidental changes.
Specifications
- Height: 4 1/8" / 105 mm
- Weight: 1 lb 4 1/4 oz / 577 g
- Ball Diameter: 1 3/4" / 45 mm
- Base Diameter: 2 7/16" / 62 mm
- Maximum Load: 26 lbs 8 oz / 12 kg
- Quick Release Plate: #8104
Item Includes
- 1 ProMaster SP45P ball head
- 1 8104 Quick Release Plate
- Both 1 high-rise and 1 low-profile memory lock dial
ProMaster Specialist SP425 Tripod with Ball Head
$ 229.95
ProMaster Specialist SP425 Tripod with Ball Head
ProMaster SKU: 8118 | Helix SKU: PR8118
Overview
Engineered to exacting standards for the discerning photographer, the ProMaster SP425 Specialist tripod will anchor your camera in difficult shooting situations.
Compact when closed but generously tall when opened it's a pleasure to use at eye level. Red colored touch points are easy to see and operate even in low light. Innovative PROlocks allow for quick opening and powerful closing of leg sections. Threaded connection ports work with a variety of accessories and ProMaster's dovetail quick release system is a fast and secure way of attaching your camera (arca-swiss compatible).
With its advanced features the Specialist SP425 gives you the flexibility to frame unique shots and realize your vision.
Ball Heads:
• Machined (not cast) from high grade aluminum. The quality of these heads is clearly evident.
• QR plates are arca-swiss compatible with an incorporated safety catch mechanism.
• Knobs are a rich red color for a professional look and so you can easily identify touch points on the head.
• SP heads can pan from the base or from the top platform and have engraved degree-markings. Use the lower panning base for the initial framing of a shot followed by the upper pan to rotate the camera without affecting its other positioning.
• A large tension control knob is easy to use, even with gloves.
• Inside of the tension control knob is a secondary knob called a Memory Lock. It sets a repeatable tension when moving the camera on the ball head.
• Two memory lock knobs are included with the ball head. Choose the protruding Memory Lock knob for ease of adjustment or switch it for the low profile Memory Lock knob which avoids any accidental changes.
Tripod Legs:
• All leg locks are PROlocks which are powerful yet easy to open, even while wearing gloves.
• Tripod feet are made of heavy duty rubber and twist to expose retractable spikes.
• Columns are easy to adjust, reversible, and can be separated into two parts for ultra low angle photography.
• Leg angle adjustments are made with an all-new slide switch.
• The yolk of each tripod is extremely strong to avoid unwanted movement.
• A bubble level is incorporated along with two 3/8" threaded accessory ports. ProMaster flex arms make a perfect companion by connecting to these ports providing an extra set of ‘hands’ for flashes, LED lights, etc…
• All touch points on the tripod are also colored red for easy identification.
• Specialist tripods are extra tall, which is a special benefit when setting up on uneven ground since a tripod is normally restricted by the lowest point it touches.
Specifications
KIT SPECIFICATIONS
- Maximum Working Height: 68 3/4" / 174.6 cm
- Maximum Height with column down: 55 5/8" / 141.3 cm
- Minimum Working Height: 7" / 17.8 cm
- Folded Length: 23 1/8" / 58.7 cm
- Maximum Load: 22 lbs / 10 kg
- Weight: 4 lbs 9 3/4 oz / 2.09 kg
BALL HEAD SPECIFICATIONS
- Height: 3 7/8" / 9.8 cm
- Weight: 15 3/8 oz / .44 kg
- Uses Quick Release Plate #8090
TRIPOD LEG SPECIFICATIONS
- Maximum Working Height: 64 7/8" / 164.8 cm
- Maximum Height with column down: 51 3/4" / 131.5 cm
- Minimum Working Height: 3 1/8" / 8 cm
- Folded Length: 19 1/4" / 48.9 cm
- Weight: 3 lbs 10 3/8 oz / 1.65 kg
ProMaster Specialist SP528 Tripod with Ball Head
$ 269.95
ProMaster Specialist SP528 Tripod with Ball Head
ProMaster SKU: 8125 | Helix SKU: PR8125
Overview
Engineered to exacting standards for the discerning photographer, the ProMaster SP528K Specialist tripod will anchor your camera in difficult shooting situations.
This ProMaster professional tripod is compact when closed but generously tall when opened it's a pleasure to use at eye level. Red colored touch points are easy to see and operate even in low light. Innovative PROlocks allow for quick opening and powerful closing of leg sections. Threaded connection ports work with a variety of accessories and ProMaster's dovetail quick release system is a fast and secure way of attaching your camera (arca-swiss compatible). With its advanced features the Specialist SP528 gives you the flexibility to frame unique shots and realize your vision.
Ball Heads:
• Machined (not cast) from high grade aluminum. The quality of these heads is clearly evident.
• QR plates are arca-swiss compatible with an incorporated safety catch mechanism.
• Knobs are a rich red color for a professional look and so you can easily identify touch points on the head.
• SP heads can pan from the base or from the top platform and have engraved degree-markings. Use the lower panning base for the initial framing of a shot followed by the upper pan to rotate the camera without affecting its other positioning.
• A large tension control knob is easy to use, even with gloves.
• Inside of the tension control knob is a secondary knob called a Memory Lock. It sets a repeatable tension when moving the camera on the ball head.
• Two memory lock knobs are included with the ball head. Choose the protruding Memory Lock knob for ease of adjustment or switch it for the low profile Memory Lock knob which avoids any accidental changes.
Tripod Legs:
• All leg locks are PROlocks which are powerful yet easy to open, even while wearing gloves.
• The ProMaster's professional tripod feet are made of heavy duty rubber and twist to expose retractable spikes.
• Columns are easy to adjust, reversible, and can be separated into two parts for ultra low angle photography.
• Leg angle adjustments are made with an all-new slide switch.
• The yolk of each tripod is extremely strong to avoid unwanted movement.
• A bubble level is incorporated along with two 3/8" threaded accessory ports. ProMaster flex arms make a perfect companion by connecting to these ports providing an extra set of ‘hands’ for flashes, LED lights, etc…
• All touch points on the ProMaster professional tripod are also colored red for easy identification.
• Specialist tripods are extra tall, which is a special benefit when setting up on uneven ground since a tripod is normally restricted by the lowest point it touches.
Specifications
KIT SPECIFICATIONS
- Maximum Working Height: 80 5/8" / 204.8 cm
- Maximum Working Height with column down: 67 1/8" / 170.5 cm
- Minimum Working Height: 7 1/4" / 18.4 cm
- Folded Length: 23 3/4" / 60.3 cm
- Maximum Load: 24 lbs 4 oz / 11 kg
- Weight: 5 lbs 11 5/8 oz / 2.6 kg
BALL HEAD SPECIFICATIONS
- Height 4 1/8" / 10.5 cm
- Weight: 1 lb 4 1/4 oz / .57 kg
- Uses Quick Release Plate #8104
TRIPOD LEG SPECIFICATION
- Maximum Working Height: 76 1/2" / 194.3 cm
- Maximum Height with column down: 63" / 160 cm
- Minimum Working Height: 3 1/8" / 8 cm
- Folded Length 19 5/8" / 49.8 cm
- Weight: 4 lbs 7 3/8 oz / 2.03 kg
ProMaster Specialist SP528C Carbon Fiber Tripod with Ball Head
$ 369.95
ProMaster Specialist SP528C Carbon Fiber Tripod with Ball Head
ProMaster SKU: 8132 | Helix SKU: PR8132
Overview
Engineered to exacting standards for the discerning photographer, the ProMaster SP528C Specialist Carbon Fiber tripod will anchor your camera in difficult shooting situations. Compact when closed but generously tall when opened it's a pleasure to use at eye level.
Red colored touch points are easy to see and operate even in low light. Innovative PROlocks allow for quick opening and powerful closing of leg sections. Threaded connection ports work with a variety of accessories and ProMaster's dovetail quick release system is a fast and secure way of attaching your camera (arca-swiss compatible). With its advanced features the Specialist SP528C gives you the flexibility to frame unique shots and realize your vision.
Ball Heads:
+ Machined (not cast) from high grade aluminum. The quality of these heads is clearly evident.
+ QR plates are arca-swiss compatible with an incorporated safety catch mechanism.
+ Knobs are a rich red color for a professional look and so you can easily identify touch points on the head.
+ SP heads can pan from the base or from the top platform and have engraved degree-markings. Use the lower panning base for the initial framing of a shot followed by the upper pan to rotate the camera without affecting its other positioning.
+ A large tension control knob is easy to use, even with gloves.
+ Inside of the tension control knob is a secondary knob called a Memory Lock. It sets a repeatable tension when moving the camera on the ball head.
+ Two memory lock knobs are included with the ball head. Choose the protruding Memory Lock knob for ease of adjustment or switch it for the low profile Memory Lock knob which avoids any accidental changes.
Carbon Fiber Legs:
+ Light weight yet incredibly strong
+ All leg locks are PROlocks which are powerful yet easy to open, even while wearing gloves.
+ Tripod feet are made of heavy duty rubber and twist to expose retractable spikes.
+ Columns are easy to adjust, reversible, and can be separated into two parts for ultra low angle photography.
+ Leg angle adjustments are made with an all-new slide switch.
+ The yolk of each tripod is extremely strong to avoid unwanted movement.
+ A bubble level is incorporated along with two 3/8" threaded accessory ports. ProMaster flex arms make a perfect companion by connecting to these ports providing an extra set of ‘hands’ for flashes, LED lights, etc…
+ All touch points on the tripod are also colored red for easy identification.
+ Specialist tripods are extra tall, which is a special benefit when setting up on uneven ground since a tripod is normally restricted by the lowest point it touches.
Specifications
KIT SPECIFICATIONS
- Maximum Working Height: 80 5/8" / 204.8 cm
- Maximum Height with column down: 67 1/8" / 170.5 cm
- Minimum Working Height: 7 1/4" / 18.4 cm (legs flat on ground)
- Minimum Working Height:11 1/4" / 28.6 cm (legs in lowest locked position)
- Folded Length: 23 3/4" / 60.3 cm
- Maximum Load: 24 lbs 4 oz / 11 kg
- Weight: 4 lbs 14 5/8 oz / 2.22 kg
BALL HEAD SPECIFICATIONS
- Height: 4 1/8" / 10.5 cm
- Weight: 1 lb 4 1/4 oz / .57 kg
- Uses Quick Release Plate #8104
TRIPOD LEG SPECIFICATION
- Maximum Working Height: 76 1/2" / 194.3 cm
- Maximum Height with column down: 63" / 160 cm
- Minimum Working Height: 3 1/8" / 8 cm (legs flat on ground)
- Minimum Working Height: 7 1/8" / 18.1 cm (legs in lowest locked position)
- Folded Length: 19 5/8" / 49.8 cm
- Weight: 3 lbs 10 3/8 oz / 1.65 kg
Item Includes
- SP528C Carbon Fiber Tripod Legs
- SPH45P Ball Head
- 8104 Quick Release Plate
- Tool kit with storage pouch
- 2 thread adapters (1/4"-20 to 3/8")
- Standard & low profile memory lock dials for ball head
ProMaster Specialist SP532 Tripod with Ball Head
$ 299.95
ProMaster Specialist SP532 Tripod with Ball Head
ProMaster SKU: 8139 | Helix SKU: PR8139
Overview
Engineered to exacting standards for the discerning photographer, the ProMaster SP532 Specialist professional photography tripod will anchor your camera in difficult shooting situations.
Compact when closed but generously tall when opened it's a pleasure to use at eye level. Red colored touch points are easy to see and operate even in low light. Innovative PROlocks allow for quick opening and powerful closing of leg sections. Threaded connection ports work with a variety of accessories and ProMaster's dovetail quick release system is a fast and secure way of attaching your camera to this professional photography tripod (arca-swiss compatible). With its advanced features the Specialist SP532 gives you the flexibility to frame unique shots and realize your vision.
Ball Heads:
• Machined (not cast) from high grade aluminum. The quality of these heads is clearly evident.
• QR plates are arca-swiss compatible with an incorporated safety catch mechanism.
• Knobs are a rich red color for a professional look and so you can easily identify touch points on the head.
• SP heads can pan from the base or from the top platform and have engraved degree-markings. Use the lower panning base on this professional photography tripod for the initial framing of a shot followed by the upper pan to rotate the camera without affecting its other positioning.
• A large tension control knob is easy to use, even with gloves.
• Inside of the tension control knob is a secondary knob called a Memory Lock. It sets a repeatable tension when moving the camera on the ball head.
• Two memory lock knobs are included with the ball head. Choose the protruding Memory Lock knob for ease of adjustment or switch it for the low profile Memory Lock knob which avoids any accidental changes.
Tripod Legs:
• All leg locks are PROlocks which are powerful yet easy to open, even while wearing gloves.
• Tripod feet are made of heavy duty rubber and twist to expose retractable spikes.
• Columns are easy to adjust, reversible, and can be separated into two parts for ultra low angle photography.
• Leg angle adjustments are made with an all-new slide switch.
• The yolk of each professional photography tripod is extremely strong to avoid unwanted movement.
• A bubble level is incorporated along with two 3/8" threaded accessory ports. ProMaster flex arms make a perfect companion by connecting to these ports providing an extra set of ‘hands’ for flashes, LED lights, etc…
• All touch points on the tripod are also colored red for easy identification.
• Specialist professional photography tripods are extra tall, which is a special benefit when setting up on uneven ground since a tripod is normally restricted by the lowest point it touches.
Specifications
KIT SPECIFICATIONS
- Maximum Working Height: 84 1/2" / 214.6 cm
- Maximum Height with column down: 70 1/4" / 178.4 cm
- Minimum Working Height: 7 1/4" / 18.4 cm (legs flat on ground)
- Minimum Working Height:11 1/4" / 28.6 cm (legs in lowest locked position)
- Folded Length: 24 1/2" / 62.2 cm
- Maximum Load: 26 lbs 8 oz / 12 kg
- Weight: 6 lbs 8 5/8 oz / 2.97 kg
BALL HEAD SPECIFICATIONS
- Height: 4 1/8" / 10.5 cm
- Weight: 1 lb 4 1/4 oz / .57 kg
- Uses Quick Release Plate #8104
TRIPOD LEG SPECIFICATION
- Maximum Working Height: 80 3/8" / 204.1 cm
- Maximum Height with column down: 66 1/8" / 167.9 cm
- Minimum Working Height: 3 1/8" / 8 cm (legs flat on ground)
- Minimum Working Height: 7 1/8" / 18.1 cm (legs in lowest locked position)
- Folded Length: 20 3/8" / 51.7 cm
- Weight: 5 lbs 4 3/8 oz / 2.40 kg
ProMaster XC-M 522K Professional Tripod Kit with Head - Black
$ 169.95
ProMaster XC-M 522K Professional Tripod Kit with Head - Black
ProMaster SKU: 3405 | Helix SKU: PR34054
Overview
The PROMASTER XC-M 522 tripod's 5-section, transverse legs fold 180° making the entire unit just over 12" long for storage and travel. Yet, fully extended it reaches a comfortable working height. Each leg's angle and length are independently adjustable, allowing the XC-M 522 to properly support your camera on uneven ground. Its dual-action ball head is strong, precise, and lightweight with an independent pan control. It has an integrated memory lock for repeatable tension control and uses ProMaster's dovetail quick release system for a fast camera connection.
The XC-M 522 is more than just a tripod, it's part of an expansive modular system.
FEATURES:
- Built-in monopod
- Transverse 180° folding legs
- Dual-action ball head with tension memory lock
- Independently adjustable leg angles
- 2-Stage, reversible center column
- Bubble levels on tripod and ball head
- Retractable weight hook
- ProMaster dovetail Q/R system (arca-swiss compatible)
- Soft, comfortable grips on touch points
- Modular design is expandable & customizable
Specifications
KIT SPECIFICATIONS
-
Maximum Working Height: 53 1/8" / 135 cm
-
Maximum Height with Column Down: 41 3/8" / 105 cm
-
Minimum Working Height: 12 1/2" / 31.8 cm *Minimum working height can be improved to 6" / 15.25 cm by adding a 3517 XC-M 522 Ground Level Adapter (sold separately)
-
Folded Length: 12 3/16" / 31 cm
-
Maximum Load: 11 lbs / 5 kg
-
Weight: 2 lbs 8 1/2 oz / 1.15 kg
-
Cold Weather Performance: -4° F / -20° C
- 5-Section Aluminum Legs
* Kit specifications include tripod with head attached
BALL HEAD SPECIFICATIONS
-
Height: 3 1/4" / 8.3 cm
-
Base Diameter: 1 5/8" / 4.1 cm
-
Weight: 8 oz / 226 grams
TRIPOD LEG SPECIFICATIONS
-
Maximum Working Height: 49 7/8" / 126.7 cm
-
Maximum Height with Column Down: 38 1/8" / 96.7 cm
-
Minimum Working Height: 9 1/4" / 23.5 cm
- Leg Angles: 20° / 50° / 80° / 180°
- Platform Diameter: 1 9/16" / 4 cm
-
Folded Length: 12 3/16" / 31 cm
-
Weight: 2 lbs 1/2 oz / .92 kg
CA Residents: Prop 65 WARNING(S)
ProMaster XC-M 525CK Professional Carbon Fiber Tripod Kit with Head - Black
$ 289.95
ProMaster XC-M 525CK Professional Carbon Fiber Tripod Kit with Head - Black
ProMaster SKU: 3482 | Helix SKU: PR34825
Overview
The PROMASTER XC-M 525C tripod's 5-section, transverse legs fold 180° making the entire unit just over 15" long for storage and travel. Yet, fully extended it reaches an incredible working height of nearly 6'! Each leg's angle and length are independently adjustable, allowing the XC-M 525C to properly support your camera on uneven ground. Its dual-action ball head is strong, precise, and lightweight with an independent pan control. It has an integrated memory lock for repeatable tension control and uses ProMaster's dovetail quick release system for a fast camera connection.
The XC-M 525C is more than just a tripod, it's part of an expansive modular system.
FEATURES:
- Built-in monopod
- Transverse 180° folding legs
- Dual-action ball head with tension memory lock
- Independently adjustable leg angles
- 2-Stage, reversible center column
- Bubble levels on tripod and ball head
- Retractable weight hook
- ProMaster dovetail Q/R system (arca-swiss compatible)
- Soft, comfortable grips on touch points
- Modular design is expandable & customizable
Specifications
KIT SPECIFICATIONS
-
Maximum Working Height: 70 3/8" / 178.8 cm
-
Maximum Height with Column Down: 54 1/4" / 137.8 cm
-
Minimum Working Height: 15 1/8" / 38.4 cm *Minimum working height can be improved to 6 1/4" / 15.88 cm by adding a 3538 XC-M 525 Ground Level Adapter (sold separately)
-
Folded Length: 15" / 38.1 cm
-
Maximum Load: 17 lbs 10 oz / 8 kg
-
Weight: 2 lbs 13 5/16 oz / 1.29 kg
-
Cold Weather Performance: -4° F / -20° C
- 5-Section Carbon Fiber Legs
* Kit specifications include tripod with head attached
BALL HEAD SPECIFICATIONS
-
Height: 3 1/4" / 8.3 cm
-
Base Diameter: 1 13/16" / 4.6 cm
-
Weight: 8 5/8 oz / 245 grams
TRIPOD LEG SPECIFICATIONS
-
Maximum Working Height: 67 1/8" / 170.5 cm
-
Maximum Height with Column Down: 51" / 129.5 cm
-
Minimum Working Height: 11 7/8" / 30.1 cm
- Leg Angles: 20° / 50° / 80° / 180°
- Platform Diameter: 1 9/16" / 4 cm
-
Folded Length: 15" / 38.1 cm
-
Weight: 2 lbs 4 11/16 oz / 1.04 kg
CA Residents: Prop 65 WARNING(S)
ProMaster XC-M 525K Professional Tripod Kit with Head - Black
$ 199.95
ProMaster XC-M 525K Professional Tripod Kit with Head - Black
ProMaster SKU: 3447 | Helix SKU: PR34474
Overview
The PROMASTER XC-M 525 tripod's 5-section, transverse legs fold 180° making the entire unit just over 15" long for storage and travel. Yet, fully extended it reaches an incredible working height of nearly 6'! Each leg's angle and length are independently adjustable, allowing the XC-M 525 to properly support your camera on uneven ground. Its dual-action ball head is strong, precise, and lightweight with an independent pan control. It has an integrated memory lock for repeatable tension control and uses ProMaster's dovetail quick release system for a fast camera connection.
The XC-M 525 is more than just a tripod, it's part of an expansive modular system.
FEATURES:
- Built-in monopod
- Transverse 180° folding legs
- Dual-action ball head with tension memory lock
- Independently adjustable leg angles
- 2-Stage, reversible center column
- Bubble levels on tripod and ball head
- Retractable weight hook
- ProMaster dovetail Q/R system (arca-swiss compatible)
- Soft, comfortable grips on touch points
- Modular design is expandable & customizable
Specifications
KIT SPECIFICATIONS
-
Maximum Working Height: 70 3/8" / 178.8 cm
-
Maximum Height with Column Down: 54 1/4" / 137.8 cm
-
Minimum Working Height: 15 1/8" / 38.4 cm *Minimum working height can be improved to 6 1/4" / 15.88 cm by adding a 3531 XC-M 525 Ground Level Adapter (sold separately)
-
Folded Length: 15" / 38.1 cm
-
Maximum Load: 17 lbs 10 oz / 8 kg
-
Weight: 3 lbs 4 7/8 oz / 1.5 kg
-
Cold Weather Performance: -4° F / -20° C
- 5-Section Aluminum Legs
* Kit specifications include tripod with head attached
BALL HEAD SPECIFICATIONS
-
Height: 3 1/4" / 8.3 cm
-
Base Diameter: 1 13/16" / 4.6 cm
-
Weight: 8 5/8 oz / 245 grams
TRIPOD LEG SPECIFICATIONS
-
Maximum Working Height: 67 1/8" / 170.5 cm
-
Maximum Height with Column Down: 51" / 129.5 cm
-
Minimum Working Height: 11 7/8" / 30.1 cm
- Leg Angles: 20° / 50° / 80° / 180°
- Platform Diameter: 1 9/16" / 4 cm
-
Folded Length: 15" / 38.1 cm
-
Weight: 2 lbs 12 1/4 oz / 1.25 kg
CA Residents: Prop 65 WARNING(S)
ProMaster XC-M 525K Professional Tripod Kit with Head - Blue
$ 199.95
ProMaster XC-M 525K Professional Tripod Kit with Head - Blue
ProMaster SKU: 4077 | Helix SKU: PR40772
Overview
The PROMASTER XC-M 525 tripod's 5-section, transverse legs fold 180° making the entire unit just over 15" long for storage and travel. Yet, fully extended it reaches an incredible working height of nearly 6'! Each leg's angle and length are independently adjustable, allowing the XC-M 525 to properly support your camera on uneven ground. Its dual-action ball head is strong, precise, and lightweight with an independent pan control. It has an integrated memory lock for repeatable tension control and uses ProMaster's dovetail quick release system for a fast camera connection.
The XC-M 525 is more than just a tripod, it's part of an expansive modular system.
FEATURES:
- Built-in monopod
- Transverse 180° folding legs
- Dual-action ball head with tension memory lock
- Independently adjustable leg angles
- 2-Stage, reversible center column
- Bubble levels on tripod and ball head
- Retractable weight hook
- ProMaster dovetail Q/R system (arca-swiss compatible)
- Soft, comfortable grips on touch points
- Modular design is expandable & customizable
Specifications
KIT SPECIFICATIONS
-
Maximum Working Height: 70 3/8" / 178.8 cm
-
Maximum Height with Column Down: 54 1/4" / 137.8 cm
-
Minimum Working Height: 15 1/8" / 38.4 cm *Minimum working height can be improved to 6 1/4" / 15.88 cm by adding a 3531 XC-M 525 Ground Level Adapter (sold separately)
-
Folded Length: 15" / 38.1 cm
-
Maximum Load: 17 lbs 10 oz / 8 kg
-
Weight: 3 lbs 4 7/8 oz / 1.5 kg
-
Cold Weather Performance: -4° F / -20° C
- 5-Section Aluminum Legs
* Kit specifications include tripod with head attached
BALL HEAD SPECIFICATIONS
-
Height: 3 1/4" / 8.3 cm
-
Base Diameter: 1 13/16" / 4.6 cm
-
Weight: 8 5/8 oz / 245 grams
TRIPOD LEG SPECIFICATIONS
-
Maximum Working Height: 67 1/8" / 170.5 cm
-
Maximum Height with Column Down: 51" / 129.5 cm
-
Minimum Working Height: 11 7/8" / 30.1 cm
- Leg Angles: 20° / 50° / 80° / 180°
- Platform Diameter: 1 9/16" / 4 cm
-
Folded Length: 15" / 38.1 cm
-
Weight: 2 lbs 12 1/4 oz / 1.25 kg
ProMaster XC-M 525K Professional Tripod Kit with Head - Red
$ 199.95
ProMaster XC-M 525K Professional Tripod Kit with Head - Red
ProMaster SKU: 3468 | Helix SKU: PR34689
Overview
The PROMASTER XC-M 525 tripod's 5-section, transverse legs fold 180° making the entire unit just over 15" long for storage and travel. Yet, fully extended it reaches an incredible working height of nearly 6'! Each leg's angle and length are independently adjustable, allowing the XC-M 525 to properly support your camera on uneven ground. Its dual-action ball head is strong, precise, and lightweight with an independent pan control. It has an integrated memory lock for repeatable tension control and uses ProMaster's dovetail quick release system for a fast camera connection.
The XC-M 525 is more than just a tripod, it's part of an expansive modular system.
FEATURES:
- Built-in monopod
- Transverse 180° folding legs
- Dual-action ball head with tension memory lock
- Independently adjustable leg angles
- 2-Stage, reversible center column
- Bubble levels on tripod and ball head
- Retractable weight hook
- ProMaster dovetail Q/R system (arca-swiss compatible)
- Soft, comfortable grips on touch points
- Modular design is expandable & customizable
Specifications
KIT SPECIFICATIONS
-
Maximum Working Height: 70 3/8" / 178.8 cm
-
Maximum Height with Column Down: 54 1/4" / 137.8 cm
-
Minimum Working Height: 15 1/8" / 38.4 cm *Minimum working height can be improved to 6 1/4" / 15.88 cm by adding a 3531 XC-M 525 Ground Level Adapter (sold separately)
-
Folded Length: 15" / 38.1 cm
-
Maximum Load: 17 lbs 10 oz / 8 kg
-
Weight: 3 lbs 4 7/8 oz / 1.5 kg
-
Cold Weather Performance: -4° F / -20° C
- 5-Section Aluminum Legs
* Kit specifications include tripod with head attached
BALL HEAD SPECIFICATIONS
-
Height: 3 1/4" / 8.3 cm
-
Base Diameter: 1 13/16" / 4.6 cm
-
Weight: 8 5/8 oz / 245 grams
TRIPOD LEG SPECIFICATIONS
-
Maximum Working Height: 67 1/8" / 170.5 cm
-
Maximum Height with Column Down: 51" / 129.5 cm
-
Minimum Working Height: 11 7/8" / 30.1 cm
- Leg Angles: 20° / 50° / 80° / 180°
- Platform Diameter: 1 9/16" / 4 cm
-
Folded Length: 15" / 38.1 cm
-
Weight: 2 lbs 12 1/4 oz / 1.25 kg
CA Residents: Prop 65 WARNING(S)
ProMaster XC-MH26 Ball Head - Black
$ 79.95
ProMaster XC-MH26 Ball Head - Black
ProMaster SKU: 3489 | Helix SKU: PR34894
Overview
The PROMASTER XC-MH26 BALL HEAD is well featured, technical ball head with incredible strength in a compact and lightweight form factor. It is made of machined (not cast) high grade aluminum.
The XC-MH26's dual action design uses separate knobs to adjust the ball tension and the panning control. An etched, numbered scale is applied to the base of this head for precise panning movements. The tension control knob has an integrated memory lock dial which allows you to set a repeatable tension stop. Its quick release system uses a dovetail style plate (arca-type) with safety bolts. All knobs are covered in a soft yet grippy material that is comfortable and easy on your fingers, even in cold weather. Multiple bubble levels (1 bullseye and 2 line levels) are integrated so you can precisely level your camera in either a horizontal or vertical position. The included quick release plate has a strap slot which is compatible with a variety of straps and hand grips.
Specifications
INCLUDES:
- 1 XC-M26 Ball Head
- 1 3608 Quick Release Plate
SPECIFICATIONS:
-
Height: 3 1/4" / 8.3 cm
-
Base Diameter: 1 5/8" / 4.1 cm
-
Weight: 8 oz / 226 grams
- Maximum Load: 11 lbs / 5 kg
- Cold Weather Performance: -4° F / -20° C
CA Residents: Prop 65 WARNING(S)
