$ 21.38
Good Sound ; Excellent Sensitivity & Feedback Rejection ; Included In All Vhf Body Packs ; Omni-directional Microphone
Discreet and lightweight, with included lapel clip and windscreen. Omni-directional element sounds good clipped anywhere near a speaker’s voice.
$ 29.95
Azden EX503L Omni lavalier Microphone with lock-down mini for 15BT, 35BT and 32BT Transmitters
$ 34.49
AZDEN EX505U Uni-Directional Lavaliere Microphone
$ 83.89
This Azden microphone is a good choice for indulging you with realistic audio tracks time and time again. It's equal parts comfortable and pro-grade. This Azden microphone is intended for many different uses, which means you are able to use it for speeches, sermons, and ceremonies. Weighing in at 3.4 ounces, this condenser microphone is very light, enabling you to quickly hold it for long periods of time at concerts or recording sessions. The Azden WLT-PRO is extremely sensitive, enabling you to catch all kinds of sounds from the subtle to the loud. Since this Azden microphone includes an omnidirectional pattern, you can pick up your subjects equally well from any direction around the mic. The expanded 50 Hz to 18 kHz frequency response of this condenser microphone helps you to easily catch ultra-low bass notes and crystalline treble tones. Plus, the Azden WLT-PRO is wireless, featuring a 76.2 meter transmit range, which means you are able to benefit from tangle-free performances.
$ 158.95
The "all-time" best selling wireless microphone for videography. This versatile system consists of the WM-PRO belt-pack transmitter 2 plug-in electret condenser microphones, a lavalier (EX-503) and handheld (EX-413) and the WR-PRO receiver which comes with both shoe-mount and hook and loop fastener. All receivers and transmitters in the "PRO" Series are on the same 2 frequencies (169.445MHz and 170.245MHz).
$ 149.00 - Sold Out
Designed for the professional, the Rode Boompole is a high grade professional boom pole for location recording. The boom pole allows you to mount your microphone securely and swivel it in a range of directions that will allow you to easily change positions and follow your sound source. Machine from high grade aluminium.
$ 149.00 - Sold Out
Made from carbon fibre, the RØDE Boompole Pro weighs only 535gm (18oz) and, from a compact 810mm (2‘ 8”), extends to a full 3m (10’). Designed for use with professional shotgun microphones such as the RØDE NTG3 as well as the Blimp windshield system, the Boompole Pro joins RØDE’s popular boom pole range which now consists of five models ranging in size, weight, and construction material. Each of the five pole sections is comprised completely from carbon fibre making it incredible lightweight while maintaining high levels of strength. The sections are easily extendable with one hand thanks to an intuitive twist-lock mechanic. RØDE offers boom pole cable clips as an optional accessory, however the company’s new RØDELink wireless XLR adaptor allows users to record audio from a shotgun microphone on the end of the Boompole Pro without the hassle and possible handling noise of cables.
Weight | 535gm |
Dimensions | 810mmH x 40mmW x 40mmD |
Warranty | 1 year |
$ 99.00 - Sold Out
Rode SKU: M1 | Helix SKU: RMM1
M1 Live performance cardioid dynamic microphone with lifetime warranty
With rock-solid build quality and a high-power neodymium capsule, the RØDE M1 live dynamic microphone is designed to provide the very best performance, night after night. Its durability is backed-up by a lifetime warranty, following registration of purchase.
The M1's ergonomically designed all-metal body is engineered for maximum comfort when used as a handheld microphone. It feels robust, solid and perfectly balanced without being heavy, and handling noise is almost completely eliminated by the microphone's internal design.
Featuring a warm response that is incredibly defined for a dynamic microphone, the M1's smooth character and defined clarity offer incredible performance as a live vocal microphone. A tightly controlled cardioid polar pattern minimises spill and feedback.
Renowned as one of the industry's best live vocal microphones, the M1 is an equally strong performer on guitar amplifiers as well as kick drum, snare drum, toms and percussion.
Acoustic Principle | Dynamic |
Polar Pattern | |
Address Type | End |
Frequency Range | 75Hz - 18kHz |
Output Impedance | 320Ω |
Sensitivity | -56.0dB re 1 Volt/Pascal (1.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
Weight | 360.00gm |
Dimensions | 171.00mmH x 51.50mmW x 51.50mmD |
Output | |
Warranty | 1 year with free extension to lifetime warranty following registration |
$ 115.00 - Sold Out
Rode SKU: M1-S | Helix SKU: RMM1S
M1-S Switchable live performance cardioid dynamic microphone. Fully lockable low-noise switch.
With rock-solid build quality and a high-power neodymium capsule, the RØDE M1-S switchable live dynamic microphone is designed to provide the very best performance, night after night. Its durability is backed-up by a ten year warranty, following registration of purchase.
The M1's ergonomically designed all-metal body is engineered for maximum comfort when used as a handheld microphone. It feels robust, solid and perfectly balanced without being heavy, and handling noise is almost completely eliminated by the microphone's internal design.
Featuring a warm response that is incredibly defined for a dynamic microphone, the M1's smooth character and defined clarity offer incredible performance as a live vocal microphone. A tightly controlled cardioid polar pattern minimises spill and feedback.
The addition of an on/off switch adds versatility for artists, engineers and presenters that prefer control while on stage. A flush-mounted lock ensures the microphone cannot be accidentally switched.
For additional security the M1-S features an XLR lock that can be used to fix the microphone to the cable.
Renowned as one of the industry's best live vocal microphones, the M1 is an equally strong performer on guitar amplifiers as well as kick drum, snare drum, toms and percussion.
$ 179.00 - Sold Out
Rode SKU: M2 | Helix SKU: RMM2
The RØDE M2 is a rugged live-performance condenser microphone designed to provide a full frequency response and premium performance on stage. Combining sound quality equal to that of the finest studio microphones, the M2 live performance handheld condenser microphone benefits from RØDE’s extensive experience. With features such as integrated shock mounting to reduce handling noise and a tailored response to reduce feedback, the M2 is a sturdy and versatile addition to your live microphone kit.
Featuring a tailored-for-stage super-cardioid polar pattern and an internally shock mounted 1/2" condenser capsule, the M2 provides a high quality alternative to dynamic microphones for live performance. The addition of an on/off switch adds versatility for artists that prefer greater control over their sound, while a lock ensures that the microphone cannot be accidentally switched.
The RØDE M2 live condenser microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
Acoustic Principle | Pressure Gradient |
Active Electronics | JFET impedance converter with bipolar output buffer |
Capsule | 0.50" |
Polar Pattern | |
Address Type | End |
Frequency Range | 35Hz - 20kHz |
Output Impedance | 50Ω |
Maximum SPL | 141dBSPL |
Maximum Output Level | 5.2mV (@ 1kHz, 1% THD into 1KΩ load) |
Sensitivity | -44.0dB re 1 Volt/Pascal (6.30mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
Equivalent Noise Level (A-weighted) | 23dBA |
Power Options | |
Weight | 308.00g |
Dimensions | 187.00mmH x 47.00mmW x 47.00mmD |
Output | |
Warranty | 1 year with free extension to 10 years following registration |
$ 149.00 - Sold Out
Rode SKU: M3 | Helix SKU: RMM3
Studio and location multi-powered cardioid condenser microphone with switchable HPF and PAD.
The RØDE M3 is a highly versatile end-address condenser microphone, designed to be completely at home in the studio, on stage or on location. It is equally suitable as an instrument microphone for guitars, drums and percussion or even vocals.
Featuring a heavy duty metal body and internally shock mounted 1/2" condenser capsule mounted for end-address, the M3 can be powered either via P48 phantom power, or an internal 9V battery.
A -10dB and -20dB level attenuator (pad), selectable from inside the battery compartment, allows recording of loud sound sources, such as a guitar amplifier or snare drum. A high-pass filter selectable on the microphone power switch introduces a filter at 80Hz to reduce low frequency sounds and handling noise.
The RØDE M3 microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
Acoustic Principle | Pressure Gradient |
Active Electronics | JFET impedance converter with bipolar output buffer |
Capsule | 0.50" |
Address Type | End |
Frequency Range | 40Hz - 20kHz(selected HPF @80Hz) |
Output Impedance | 200Ω |
Maximum SPL | 142dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
Maximum Output Level | 9.2mV |
Sensitivity | -40.0dB re 1 Volt/Pascal (6.30mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
Equivalent Noise Level (A-weighted) | 21dB-A |
Weight | 390.00gm |
Dimensions |
225.00mmH x 33.00mmW x 33.00mmD |
Warranty |
1 year with free extension to 10 years following registration |
$ 199.00 - Sold Out
Rode SKU: M5-MP | Helix SKU: RMM5MP
Matched pair of compact 1/2" cardioid condenser microphones. Includes 2 x RM5 mic clips and 2 x WS5 windshields
Designed and made in Australia, the M5 is a compact ½” cardioid condenser microphone with low noise and a full frequency response. A result of many years’ experience building the award-winning NT5 microphone, RØDE has succeeded in making a high-quality ‘pencil’ style permanently polarized condenser that will impress even the most demanding of artists and engineers. Ideal for studio recording and live on stage, the M5 is equally at home on a range of acoustic instruments, choirs, or anywhere you would employ a small diaphragm condenser microphone, either individually or as a stereo array. This matched pair has been carefully selected to ensure a variation of no more than 1dB sensitivity between the microphones. A premium foiled certificate is supplied to verify the authenticity of the pair. The M5 is finished with RØDE’s proprietary ceramic coating which offers a sleek matt black finish, and is supplied with WS5 windshields and RM5 stand mounts.
Acoustic Principle | Pressure Gradient |
Active Electronics | JFET impedance converter with bipolar output buffer |
Capsule | 0.50" |
Polar Pattern | |
Address Type | End |
Frequency Range | 20Hz - 20kHz |
Output Impedance | 200Ω |
Maximum SPL | 140dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
Maximum Output Level | 13.5mV |
Sensitivity | -34.0dB re 1 Volt/Pascal (20.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
Equivalent Noise Level (A-weighted) | 19dB-A |
Power Options | |
Weight | 80.00gm |
Dimensions | 100.00mmH x 20.00mmW x 20.00mmD |
Output | |
Warranty | 1 year with free extension to 10 years following registration |
$ 129.00 - Sold Out
A lightweight, high grade professional boom pole, the Mini Boompole allows you to mount your microphone securely. Plus you can swivel it in a range of directions that will allow you to easily change positions and follow your sound source. The Mini Boompole extends from 0.84m (33 inches) to 2.05m (81 inches).
Weight | 580.00gm |
Dimensions | 2100.00mmH x 32.00mmW x 32.00mmD |
Warranty | 1 year |
$ 529.00 - Sold Out
Rode SKU: NT4 | Helix SKU: RMNT4
Fixed X/Y stereo 1/2" condenser microphone with 3.5mm minijack and dual XLR connectivity. P48 and 9V battery powered.
The RØDE NT4 stereo microphone offers a perfect X/Y stereo array without the need for matched pair microphones, complex stereo bars and equipment. Simply place the microphone and capture a realistic stereo field using a single microphone.
Combining an acoustically matched pair of 1/2” cardioid condenser capsules fixed in a perfect 90 degree near-coincident alignment, the NT4 instantly creates a faithful stereo array that is ideal for drum overheads, percussion, choir vocals, environmental recording and sound design in a studio or in the field.
The NT4's versatility is further extended by its ability to be powered by a 9V battery, in addition to 48V phantom power. Both stereo XLR and 3.5mm minijack cables are supplied to ensure the NT4 is ready to record to mixing console, portable recorder or camera.
The RØDE NT4 microphone is designed and made in Australia, and covered by RØDE's industry leading 10 year warranty.
Acoustic Principle | Pressure Gradient |
Active Electronics | JFET impedance converter with bipolar output buffer |
Capsule | 0.50" |
Polar Pattern | |
Address Type | End |
Frequency Range | 20Hz - 20kHz |
Output Impedance | 200Ω |
Maximum SPL | 143dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
Maximum Output Level | 13.9mV |
Sensitivity | -38.0dB re 1 Volt/Pascal (12.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
Equivalent Noise Level (A-weighted) | 16dB-A |
Power Options |
9V battery powered
|
Weight | 480.00gm |
Dimensions | 231.00mmH x 61.00mmW x 33.00mmD |
Output | |
Warranty | 1 year with free extension to 10 years following registration |
$ 429.00 - Sold Out
Rode SKU: NT5 Matched Pair | Helix SKU: RMNT5MatchedPair
Pair of acoustically matched NT5 1/2" cardioid condenser microphones.
The Rode NT5 is a matched pair of small diaphragm microphones featuring full frequency response and low-noise output circuitry. Designed for general instrument recording and sound reinforcement.
The cardioid polar pattern effectively minimizes audio at the off-axis sections, reducing noise caused by, leakage, monitors, additional instruments etc. The NT5 offers a frequency response of 20 Hz to 20 kHz allowing the microphones to be used in a wide variety of applications such as drum over-head miking, stereo capturing of instruments, vocal capturing etc. The NT5 is powered via +24V or +48V phantom power. The package includes dual windscreens and stand mounts in a durable road case.
Operating Principle | Pressure Gradient |
Transducer | Condenser |
Diaphragm | 0.5" (12.70 mm) |
Polar Pattern | Cardioid |
Frequency Range | 20 Hz to 20 kHz |
Signal to Noise Ratio | 78 dB |
Equivalent Noise Level | 16 dB A-Weighted |
Maximum SPL | 143 dB SPL 1% |
Impedance | 100 ohms |
Sensitivity | -38 dB, re: 1 V/Pa |
Power Requirements | 24 V, 48 V |
Output Connectors | 3-Pin XLR |
Dynamic Range | 128 dB |
Length | 4.65" (118 mm) |
Diameter | 0.79" (20 mm) |
Weight | 0.22 lb (100 g) |
Packaging Info:
Package Weight 3.5 lb
Box Dimensions (LxWxH) 15.6 x 12.3 x 4.4"
$ 219.00 - Sold Out
Rode SKU: NT5 | Helix SKU: RMNT5
Compact 1/2" cardioid condenser microphone.
The NT5 is RØDE's premier small-diaphragm cardioid condenser microphone, sometimes referred to as a 'pencil mic'.
Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a 1/2" capsule, an active J-FET impedance converter with bipolar output buffer.
Its tight cardioid pickup pattern also makes it ideal for use as an indoor dialogue microphone for filmmaking on a mic stand or boom.
Expanding the NT5's versatility, an interchangeable omnidirectional capsule (NT45-O) is available.
Finished in durable satin nickel, the NT5 available as a single microphone or as an acoustically matched pair.
The NT5 is designed and made in Australia, and covered by RØDE's industry leading 10 year warranty.
Acoustic Principle | Pressure Gradient |
Active Electronics | JFET impedance converter with bipolar output buffer |
Capsule | 0.50" |
Polar Pattern | |
Address Type | End |
Frequency Range | 20Hz - 20kHz |
Output Impedance | 100Ω |
Maximum SPL | 143dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
Maximum Output Level | 13.9mV |
Sensitivity | -38.0dB re 1 Volt/Pascal (12.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
Equivalent Noise Level (A-weighted) | 16dB-A |
Power Options |
+24V phantom power required from mixer or interface
|
Weight | 101.00gm |
Dimensions | 118.00mmH x 20.00mmW x 20.00mmD |
Output | |
Warranty |
1 year with free extension to 10 years following registration |
$ 829.00 - Sold Out
Rode SKU: NT55 Matched Pair | Helix SKU: RMNT55MatchedPair
Pair of acoustically matched NT55 1/2" cardioid condenser microphones.
The Rode NT55 is a matched pair of compact condenser microphones designed to accurately reproduce vocals and general instruments in recording and sound reinforcement applications. The NT55 features a 3-position pad switch for added headroom while capturing loud, peaking audio signal. A 3-position low-cut filter switch eliminates low frequency noise. The NT55 is a great choice for vocals, guitar, drums, cabinets and more. The NT55 includes interchangeable omnidirectional and cardioid capsules for even further flexibility.
Interchangeable Capsules
Omnidirectional and cardioid capsules are included for added flexibility.
3-Position Pad Switch
0, -10 and -20 dB pad switch enhances headroom and minimizes distortion.
3-Position Low Frequency Roll Off
Flat, 75 Hz and 150 Hz roll-off filter switch minimizes low frequency noise.
Operating Principle | Pressure Gradient |
Transducer | Condenser |
Diaphragm | 0.5" (12.70 mm) |
Polar Pattern | Cardioid, Omnidirectional |
Frequency Range | 20 Hz to 20 kHz |
Signal to Noise Ratio | 79 dB |
Equivalent Noise Level | 15 dB A-Weighted |
Maximum SPL | 136 dB SPL 1% |
Impedance | 100 ohms |
Sensitivity | -38 dB, re: 1 V/Pa |
Power Requirements | 48 V |
Output Connectors | 3-Pin XLR |
Dynamic Range | 121 dB |
Length | 5.71" (145 mm) |
Diameter | 0.79" (20 mm) |
Weight | 0.22 lb (100 g) |
Package Weight 3.5 lb
Box Dimensions (LxWxH) 14.5 x 12.0 x 4.5"
$ 369.00 - Sold Out
Rode SKU: NT55 | Helix SKU: RMNT55
Compact 1/2" cardioid and omni condenser microphone.
Like the NT5, the RØDE NT55 is a small-diaphragm, true-condenser cardioid microphone, sometimes referred to as a 'pencil mic'. The NT55 adds both a three position pad (0, -10dB, -20dB) and three stage high pass filter (Off, 75Hz, 150Hz), and includes the interchangeable NT45-O omnidirectional capsule.
Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a 1/2" capsule, an active J-FET impedance converter with bipolar output buffer.
Its tight cardioid pickup pattern also makes it ideal for use as an indoor dialogue microphone for filmmaking on a mic stand or boom.
Finished in durable satin nickel, the NT55 available as a single microphone or as an acoustically matched pair.
The NT55 is designed and made in Australia, and covered by RØDE's industry leading 10 year warranty.
Acoustic Principle | Pressure Gradient |
Active Electronics | JFET impedance converter with bipolar output buffer |
Capsule | 0.50" |
Polar Pattern | |
Address Type | End |
Frequency Range | 20Hz - 20kHz |
Output Impedance | 100Ω |
Maximum SPL | 136dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
Maximum Output Level | 8.0mV |
Sensitivity | -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
Equivalent Noise Level (A-weighted) | 15dB-A |
Power Options | |
Weight | 110.00gm |
Dimensions | 145.00mmH x 20.00mmW x 20.00mmD |
Output | |
Warranty | 1 year with free extension to 10 years following registration |
$ 429.00 - Sold Out
Rode SKU: NT6 | Helix SKU: RMNT6
Compact 1/2" condenser microphone with 3m (10') Kevlar® reinforced cable to detachable capsule head. Also features HPF and PAD.
The RØDE NT6 is an extremely compact 1/2" cardioid condenser microphone, specifically designed for difficult mounting applications where the highest quality audio is required.
Although clearly relevant to instrument miking, the NT6 is extremely well suited to any situation where an unobtrusive but powerful microphone is required such as location recording.
The microphone is split into two modular components, joined by via a custom 3m (10') shielded, Kevlar® reinforced cable.
Featuring a gold-sputtered, true-condenser capsule, the NT6 capsule head measures 45mm (1.8”) in length and weighs only 42gm (1.5oz). The included all-metal, multi-position mounting ring provides 180 degrees of vertical rotation.
The NT6 preamp-body incorporates both a high-pass filter and pad setting. The high-pass filter can be introduced to cut vibration, rumble and undesired sounds sources under 80Hz, while the PAD offers a -10dB level attenuation, useful when recording louder sound sources.
The NT6's small form factor make it an ideal small diaphragm cardioid microphone for use in the Mid-Side (M/S) stereo array, in combination with a figure-8 large diaphragm microphone such as the NT2-A, NT2000 or K2.
The NT6 is designed and made in Australia, and covered by RØDE's industry leading 10 year warranty.
Acoustic Principle | Pressure Gradient |
Active Electronics | JFET impedance converter with bipolar output buffer |
Capsule | 0.50" |
Polar Pattern | |
Address Type | End |
Frequency Range | 40Hz - 20kHz |
Output Impedance | 200Ω |
Maximum SPL | 135dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
Maximum Output Level | 6.0mV |
Sensitivity | -37.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
Equivalent Noise Level (A-weighted) | 19dB-A |
Power Options | |
Weight | 386.00gm |
Dimensions | 189.00mmH x 64.00mmW x 20.00mmD |
Output | |
Warranty | 1 year with free extension to 10 years following registration |
$ 799.00 - Sold Out
Rode SKU: NTR | Helix SKU: RMNTR
NTR Active Ribbon Microphone
At first glance of the NTR you’re aware that it’s very special and unique – an intricate blend of art and science.
Designed to hang in the world’s finest recording studios and performance halls equally as well as home studio spaces, its existence is a labour of love for RØDE. Every element of the NTR, from the transformer to the ribbon element itself, has been designed and created in-house at RØDE’s headquarters in Sydney, Australia. All with the aim of crafting the finest ribbon microphone available.
Sonically, the NTR is capable of reproducing unprecedented high frequency detail and accuracy, addressing common criticisms of other ribbon microphones, while opening up the possible usage scenarios considerably. This allows it to record sound sources that usually require a more sensitive microphone element.
Acoustic Principle | Velocity Transducer |
Active Electronics | Step-up Transformer and signal balanced preamp stage |
Polar Pattern |
Figure 8 - picks up from the front and rear and rejects sides
|
Address Type | Side |
Frequency Range | 20Hz - 20kHz |
Output Impedance | 200Ω |
Maximum SPL | 130dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
Sensitivity | -30.5dB re 1 Volt/Pascal (30.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
Equivalent Noise Level (A-weighted) | 15dB-A |
Power Options | |
Weight | 1047gm |
Dimensions | 216mmH x 65mmW x 65mmD |
Output | |
Warranty | 1 year with free extension to 10 years following registration |
$ 229.00
Rode SKU: Podcaster | Helix SKU: RMPodcaster
The RØDE Podcaster is a dynamic, end-address USB microphone that combines broadcast-quality audio with the simplicity of USB connectivity, allowing recording direct to a computer without the need for an additional digital interface.
Including an audiophile quality 18-bit resolution, 48kHz sampling A/D converter, the Podcaster processes all of the analogue-to-digital conversion internally, bypassing the computer's lower quality on-board sound controller altogether.
A headphone output on the microphone body provides zero-latency monitoring, so the user can hear exactly what is being recorded, free of delay or echo.
The Podcaster features an internal pop filter, designed to minimise plosives sounds that can overload the microphone capsule and distort the audio output.
It is fully compatible with Windows 7, Windows 8 and Mac OS X computers, as well as several Linux distributions. The microphone is bus powered and features a status LED to indicate operation.
The Podcaster is ideal for podcasting, vodcasting, YouTube videos, voice recognition software, corporate videos and any production application that requires a simple yet professional voice-over microphone. It is also a convenient demo microphone for musicians and songwriters that prefer the convenience of a USB microphone but don't want to compromise sound quality.
It can also be used as an iPad microphone for the Apple iPad (in conjunction with the iPad Camera Connection Kit and a powered USB hub) to provide high quality recording to various iPad audio applications such as Garageband.
The Podcaster includes a sturdy RM2 microphone ring mount. For professional applications the optional PSM1 shock mount and PSA1 boom arm are highly recommended.
The RØDE Podcaster USB microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
Acoustic Principle | Dynamic |
Active Electronics | Analogue signal conditioning + A/D and USB interface |
Polar Pattern | |
Resolution | 18-bit |
Sampling Rate | 8-48kHz |
Address Type | End |
Frequency Range | 40Hz - 14kHz |
Output Impedance | 0Ω |
Maximum SPL | 115dBSPL |
Sensitivity | -51.0dB re 1 Volt/Pascal (2.80mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
Power Options | |
Weight | 655.00g |
Dimensions | 215.00mmH x 56.00mmW x 52.00mmD |
Output | |
Warranty | 1 year with free extension to 10 years following registration |
$ 49.95 - Sold Out
The SM3 is a suspension shock mount with Hot-Shoe adaptor for mounting the RØDE NTG1, NTG2, NTG3, NT3, NT4 & NT5 microphones on video cameras.
This allows you to connect your RØDE Microphone to a number of video cameras on the market while giving your camera maximum isolation from any handling vibrations.
NT3, NT4, NT5, NT55, NTG1, NTG2
$ 399.00 - Sold Out
RØDE SKU: NT2-A | Helix SKU: RMNT2A
Multi pattern 1" dual condenser microphone, featuring switchable omni, cardioid and figure 8 polar patterns, HPF and PAD.
The NT2-A carries on the tradition forged by the now legendary RØDE NT2. A professional large 1" capsule studio microphone incorporating three-position pick-up patterns, pad and high pass filter switches conveniently located on the mic body.
The frequency and transient response of this transducer has been voiced to complement today's modern recording techniques, and yet still evoke the silky smooth character of the legendary microphones of the 50s and 60s. These features provide the flexibility and superlative audio characteristics that make the NT2-A one of the most versatile condenser mics available.
Supplied with the SM6 shock mount, dust cover, microphone cable and DVD hosted by Grammy-nominated engineer and producer John Merchant showing a range of recording techniques specific to the NT2-A.
The RØDE NT2-A microphone is designed and made in Australia, and covered by RØDE's industry leading 10 year warranty.
Acoustic Principle | Pressure Gradient |
Active Electronics | JFET impedance converter with bipolar output buffer |
Capsule | 1.00" |
Polar Pattern | |
Address Type | Side |
Frequency Range | 20Hz - 20kHz |
Output Impedance | 200Ω |
Maximum SPL | 147dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
Maximum Output Level | 16.0mV |
Sensitivity | -36.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
Equivalent Noise Level (A-weighted) | 7dB-A |
Power Options | |
Weight | 860.00gm |
Dimensions | 209.00mmH x 55.00mmW x 55.00mmD |
Output | |
Warranty | 1 year with free extension to 10 years following registration |
$ 114.95 - Sold Out
The WM/T-PRO is a handheld microphone with a built-in transmitter. It transmits on the standard “PRO” frequencies (169.445MHz and 170.245MHz) and is compatible with all PRO Series receivers. The WM/T-PRO has a standby switch to mute audio and a rubberized coating to reduce handling noise. Runs on a single “AA” battery for up to 10 hours of continuous use.