$ 69.00 - Sold Out
F&V SKU:118151060000 | Helix SKU: FV118151060000
$ 34.95 - Sold Out
F&V SKU: 102010040101 | Helix SKU: FV102010040101
The F&V Lighting 4.2" Stainless Steel Articulating Arm allows for the mounting of LCD monitors or small LED lights to the top of your camera shoe mount. With a three-jointed arm, this accessory has a wide range of motion. A single-point lock knob allows you to easily secure the position of your arm in place. This articulating arm features stainless steel sockets that offer greater strength. This arm can be mounted either on top of a camera in a standard cold shoe via the cold shoe adapter that is included. The cold shoe adapter can also be removed revealing a 1/4"-20 male thread that can be used to thread the arm into 1/4"-20 thread-ins.
$ 39.99
F&V SKU: 102010050101 | Helix SKU: FV102010050101
The F&V Lighting 8.3" Stainless Steel Articulating Arm allows for the mounting of LCD monitors or small LED lights to the top of your camera shoe mount. With a three-jointed arm, this accessory has a wide range of motion. A single-point lock knob allows you to easily secure the position of your arm in place. This articulating arm features stainless steel sockets that offer greater strength. This arm can be mounted either on top of a camera in a standard cold shoe via the cold shoe adapter that is included. The cold shoe adapter can also be removed revealing a 1/4"-20 male thread that can be used to thread the arm into 1/4"-20 thread-ins.
$ 159.50 - Sold Out
F&V SKU: 10311002 | Helix SKU: FV10311002
Control the light spread of your Z400S Soft or K4000 SE with this four leaf barn door kit. The kit includes the top, bottom, and two side barn door flags. The flags easily attach to the included FAF-1 Filter Frame with thumb screws. The FAF-1 uses the new mounting system found on the Z400S Soft and K4000 SE lights. The frame quickly snaps onto the light and is locked into place. When it needs to be removed, press the button on each corner of the light to release the frame.
Please note this kit is not compatible with the K4000 Lumic, K4000 Plus, nor the old Z400 UltraColor lights. These lights will need a corner upgrade to allow use of this kit.
$ 69.50
F&V SKU: 10311007 | Helix SKU: FV10311007
This set of side barn doors attaches to the FAF-1 Filter Adapter Frame and the FAF-2 Filter Adapter Frame (both sold separately) to be used with the K4000 SE, Z400S Soft, and Z800S Soft 1x1 LED Lights. The barn door flags include mounting screws to attach them to the filter adapter frame. The sides are a single leaf design.
Note - These Barn Doors cannot attach to the lights directly. They need the FAF-1 Filter Adapter Frame or the FAF-2 Filter Adapter Frame to attach to the lights.
$ 89.50
F&V SKU: 10311008 | Helix SKU: FV10311008
This set of side barn doors attaches to the FAF-1 Filter Adapter Frame and the FAF-2 Filter Adapter Frame (both sold separately) to be used with the K4000 SE, Z400S Soft, and Z800S Soft 1x1 LED Lights. The barn door flags include mounting screws to attach them to the filter adapter frame. The sides are a three-leaf design.
Note - These Barn Doors cannot attach to the lights directly. They need the FAF-1 Filter Adapter Frame or the FAF-2 Filter Adapter Frame to attach to the lights.
$ 59.50 - Sold Out
F&V SKU: 10311005 | Helix SKU: FV10311005
This set of top and bottom barn doors attaches to the FAF-1 Filter Frame Adapter (sold separately) to be used with the K4000 SE and Z400S Soft 1x1 LED Lights. The barn door flags include mounting screws to attach them to the filter adapter frame.
Note - These Barn Doors cannot attach to the lights directly. They need the FAF-1 Filter Frame Adapter to be able to mount to the lights.
$ 79.50
F&V SKU: 10311006 | Helix SKU: FV10311006
This set of top and bottom barn doors attaches to the FAF-1 Filter Frame Adapter (sold separately) to be used with the Z800S Soft 1x2 LED Light. The barn door flags include mounting screws to attach them to the filter adapter frame.
Note - These Barn Doors cannot attach to the lights directly. They need the FAF-1 Filter Frame Adapter to be able to mount to the lights.
$ 99.00
F&V SKU: 109112010201 | Helix SKU: FV109112010201
Use the Dedicated WiFi Remote Control to modify the intensity or color temperature of any F&V product that has a WiFi Module.
Please note, this remote cannot control the individual quadrants of the Z720 and R720 with Wifi Module.
PRO TIP: The remote will lock after 30 seconds of inactivity. To wake up the remote press the CANCEL and SET buttons at the same time.
Barcode | N/A |
---|---|
Manufacturer | F&V |
Country of Manufacture | China |
Specifications |
Uses 4x AAA batteries LCD display |
Package Contents |
(1x) Dedicated WiFi Remote Control |
Product Weight (lb) | N/A |
$ 59.50 - Sold Out
F&V SKU: 10315002 | Helix SKU: FV10315002
The FAF-1 is a frame that gels and filters can be mounted and then attached to either the K4000 SE or Z400S Soft light. The frame uses the new attachment system on the K4000 SE and Z400S Soft. Simply snap on the frame and it is secured to the light and cannot be removed until the buttons on each of the corners are pushed in.
The frame also is required to use the BST2-1, BSS2, and BSS6 Barn Doors (sold separately) with the lights. Each Barn Door attaches to the frame by two thumb screws.
Securely mount gels, filters, and barn doors to the K4000 SE and Z400S Soft lights.
$ 79.50
F&V SKU: 10315003 | Helix SKU: FV10315003
The FAF-2 is a frame that gels and filters can be mounted and then attached to Z800S Soft light. The frame uses the new attachment system on the Z800S Soft. Simply snap on the frame making it secured to the light and cannot be removed until the buttons on each of the corners are pushed in.
The frame is required to use the BST2-2, BSS2, and BSS6 Barn Doors (sold separately) with the lights. Each Barn Door attaches to the frame by two thumb screws.
Securely mount gels, filters, and barn doors to the Z800S Soft lights.
$ 15.99
F&V SKU: 21815004 | Helix SKU: FV21815004
This replacement Frost Diffusion Filter for the R-300 LED Ring Light gives a slight diffusion to the light and widens the beam angle. This diffuser can also act as a filter holder for gels by sandwiching them between the filter and the light. It also protects the front surface of the lights from dust and scratches. The magnetic mounting allows for quick and easy removal and swapping of filters. Compatible with the original R-300, R-300 SE, and R-300S SE Ring Lights.
Manufacturer: F&V
Country of Manufacture: China
Package Contents: (1x) R-300 Frost Diffusion Filter$ 79.50
F&V SKU: 10314001 | Helix SKU: FV10314001
Narrow your lights output to 30 degrees. This grid uses the new push-button connectors found on the K4000 SE, K4000S SE, and the Z400S Soft. Not compatible with previous 1x1 panels.
Control the beam angle of the K4000 SE and Z400S Soft lights with the HG30-1 Honey Comb Grid. This grid narrows the beam of the light down to 30 degrees. The grid uses the new push-button mounts featured on the K4000 SE and Z400S Soft. Simply snap on the grid and it's secured to the light. To remove, press the buttons on each of the corners on the light. On the front of the grid is a clear plastic protector to help prevent damage to the metal grid.
$ 99.50
F&V SKU: 10314007 | Helix SKU: FV10314007
Narrow your lights output to 30 degrees. This grid uses the new push-button connectors found on the Z800S Soft. Not compatible with previous 1x2 panels.
Control the beam angle of the Z800S Soft light with the HG30-2 Honey Comb Grid. This grid narrows the beam of the light down to 30 degrees. The grid uses the new push-button mounts featured on the Z800S Soft. Simply snap on the grid and it's secured to the light. To remove, press the buttons on each of the corners on the light. On the front of the grid is a clear plastic protector to help prevent damage to the metal grid.
$ 79.50
F&V SKU: 10314005 | Helix SKU: FV10314005
Control the beam angle of the K4000 SE and Z400S Soft lights with the HG45-1 Honey Comb Grid. This grid narrows the beam of the light down to 45 degrees. The grid uses the new push-button mounts featured on the K4000 SE and Z400S Soft. Simply snap on the grid and it's secured to the light. To remove, press the buttons on each of the corners on the light. On the front of the grid is a clear plastic protector to help prevent damage to the metal grid.
Narrow your lights output to 30 degrees. This grid uses the new push-button connectors found on the K4000 SE, K4000S SE, and the Z400S Soft. Not compatible with previous 1x1 panels.
Barcode | N/A |
---|---|
Manufacturer | F&V |
Country of Manufacture | China |
Specifications | N/A |
Package Contents | (1x) HG45-1 Honeycomb Grid |
Product Weight (lb) | N/A |
$ 99.50
F&V SKU: 10314008 | Helix SKU: FV10314008
Control the beam angle of the Z800S Soft light with the HG45-2 Honey Comb Grid. This grid narrows the beam of the light down to 45 degrees. The grid uses the new push-button mounts featured on the Z800S Soft. Simply snap on the grid and it's secured to the light. To remove, press the buttons on each of the corners on the light. On the front of the grid is a clear plastic protector to help prevent damage to the metal grid.
Narrow your lights output to 45 degrees. This grid uses the new push-button connectors found on the Z800S Soft. Not compatible with previous 1x2 panels.
$ 39.00 $ 19.99
F&V SKU: 102070300101 | Helix SKU: FV102070300101
Overview
The F&V Lighting Junior Joint Pro Ball Head has a 1/4"-20 male thread on an articulating ball joint. It has a standard cold shoe to mount on to any camera's standard hot/cold shoe. On the underside of the cold shoe is 1/4"-20 female thread-in which can be used in conjunction with many photographic light stands - threading onto the 1/4"-20 male thread of the light stands 5/8" stud. The Junior Joint is strong enough to support the weight of 4x Z96 units linked together, or 2x Z180 units with batteries.
$ 549.00
F&V SKU: 18022103 | Helix SKU: FV18022103
Maximum Brightness
Utilizing a new lens design, the K4000 Power offers incredible brightness whenever maximum output is needed. Maintaining a 60° wide beam angle the K4000 Power creates up to 7200 lux @ 1m and can still be powered by a single V-Mount battery.
Vibrant Color Reproduction
With a TLCI of up to 99 (97±2) and a CRI of up to 97 (95±2), the Power fixtures raise the color reproduction to new heights, representing colors truthfully, neutral and vibrant.
New Attachment System
Incorporating the new F&V attachment system for light shaping accessories, the Power fixtures are compatible to the full range of tools like barndoors, honeycomb grids, diffusors, filter holders and softboxes.
Barcode | 6949773305179 |
---|---|
Manufacturer | F&V |
Country of Manufacture | China |
Illuminance | 7200 lux @1m, 1800 lux @2m, 800 lux @3m |
Color Temperature (CCT) | Daylight 5600K (+/-200K) |
Beam Angle | 75° (45° Angle with KS-1 Intensifier - Sold Separately) |
Color Rendition | TLCI 95-99 (97±2), CRI 93-97 (95±2) |
Dimming | 0-100% Continuous |
Estimated LED Lifetime | 50,000 Hours (15 years of average use) |
Thermal Design | Silent Passive Cooling |
Power Options | V-Mount Battery, AC Adapter, Please note Batteries are SOLD SEPARATELY |
Power Consumption | 87 W Nominal, 90 W Maximum |
Power Voltage | 13 - 24 V DC |
Battery Lifetime | N/A |
Mounting Options | Yoke with 5/8" Mount |
Package Contents |
(1x) K4000 Power 1x1 LED Panel Light with V-Mount Plate (1x) V-Mount AC Adapter with Power Cord |
$ 459.00 $ 399.00 - Sold Out
F&V SKU: 18020103 | Helix SKU: FV18020103
The K4000 SE Daylight Studio Panel light sports 400 pure color power LEDs, offering 3046 Lux @ 1 meter in a self-contained 1'x1' unit. Carefully selected LEDs are put through multiple tests and evaluations to ensure perfect color balance and diode matching. This offers an absolute pure color consistency between LEDs, and a clean daylight calibrated color (5600K) along with a TLCI of 97.
The Milk-White Diffusion Filter packaged with our K4000, is a translucent white diffusion filter that helps create a single light source. Not only does this offer an ultra-soft light but creates just a single shadow. Unlike most 1'x1' panels with open face LED sources which have the tendency for each diode to create cross-angled shadows, the Milk-White Diffusion Filter eliminates this problem, giving you an ultra-soft bright light source.
The light features new push-button accessory mounts which have allowed us to expand the accessory options to include grids, barn doors, and filter holders. (All sold separately) Accessories simply snap onto the front of the light for secure mounting. To remove the items, push in the button on each corner and the accessory is released.
There are several modules (sold separately) available to control multiple lights. The SmartSync Control Circuit Module allows multiple K4000 SE lights to be linked in series with standard CAT5 Cables. The DMX 512 Module will allow the lights to be controlled via a DMX control board. The Wifi module allows for wireless control of the lights through the optional remote or in the near future by iPhone app through the upcoming F&V Wifi router.
Perfect for professionals looking to gain complete control over their studio lighting rigs, the K4000 Daylight Panel offers exceptional light quality at an affordable price.
Package Contents:
(1x) K4000 SE 1x1 LED Panel Light with V-Mount Plate
(1x) Milk Diffuser
(1x) V-Mount AC Adapter with Power Cord
Beam Angle: | 50° |
White Balance: | 3200K to 5600K +/-200K |
Illuminance: | 3046 lux @ 1m |
Dimming: | 0-100% Continuous |
Estimated LED Lifetime: | 50,000 hours (15 years of average use) |
Color Rendition: | TLCI 95-99 (97 +/-2), CRI 93-97 (94 +/-2) |
Thermal Design: | Silent Passive Cooling |
Mounting: | Receptor for Baby Pin, 5/8" Stud |
Ambient Temperature Operation: | -20 to +45 degrees C (-4 to +113 degrees F) |
Power Voltage Range: | 10 - 18 V DC |
Input Current Range: | Max 2.62A @ 10V / 1.46A @ 18V |
Power Consumption: | 25.5w Nominal, 26.2w Maximum |
Power Options: |
AC Adapter (included), D-Tap, V-Mount Battery (sold separately) |
$ 1,299.00 - Sold Out
F&V SKU: 18020133 | Helix SKU: FV18020133
The K4000 SE Daylight Studio Panel light sports 400 pure color power LEDs, offering 3046 Lux @ 1 meter in a self-contained 1'x1' unit. Carefully selected LEDs are put through multiple tests and evaluations to ensure perfect color balance and diode matching. This offers an absolute pure color consistency between LEDs, and a clean daylight calibrated color (5600K) along with a TLCI of 97.
The Milk-White Diffusion Filter packaged with our K4000, is a translucent white diffusion filter that helps create a single light source. Not only does this offer an ultra-soft light but creates just a single shadow. Unlike most 1'x1' panels with open face LED sources which have the tendency for each diode to create cross-angled shadows, the Milk-White Diffusion Filter eliminates this problem, giving you an ultra-soft bright light source.
The light features new push-button accessory mounts which have allowed us to expand the accessory options to include grids, barn doors, and filter holders. (All sold separately) Accessories simply snap onto the front of the light for secure mounting. To remove the items, push in the button on each corner and the accessory is released.
There are several modules (sold separately) available to control multiple lights. The SmartSync Control Circuit Module allows multiple K4000 SE lights to be linked in series with standard CAT5 Cables. The DMX 512 Module will allow the lights to be controlled via a DMX control board. The Wifi module allows for wireless control of the lights through the optional remote or in the near future by iPhone app through the upcoming F&V Wifi router.
Perfect for professionals looking to gain complete control over their studio lighting rigs, the K4000 Daylight Panel offers exceptional light quality at an affordable price.
Package Contents:
(3x) K4000 SE 1x1 LED Panel Light with V-Mount Plate
(1x) Carrying Case
(3x) Milk Diffuser
(3x) V-Mount AC Adapter with Power Cord
Beam Angle: | 50° |
White Balance: | 5600K +/-200K |
Illuminance: | 3046 lux @ 1m |
Dimming: | 0-100% Continuous |
Estimated LED Lifetime: | 50,000 hours (15 years of average use) |
Color Rendition: | TLCI 95-99 (97 +/-2), CRI 93-97 (94 +/-2) |
Thermal Design: | Silent Passive Cooling |
Mounting: | Receptor for Baby Pin, 5/8" Stud |
Ambient Temperature Operation: | -20 to +45 degrees C (-4 to +113 degrees F) |
Power Voltage Range: | 10 - 18 V DC |
Input Current Range: | Max 2.62A @ 10V / 1.46A @ 18V |
Power Consumption: | 25.5w Nominal, 26.2w Maximum |
Power Options: |
AC Adapter (included), D-Tap, V-Mount Battery (sold separately) |
$ 1,649.00 - Sold Out
The K4000 Plus utilizes the F&V Plus LED. The F&V Plus LED has an accurate color temperature and has a color rendering of CRI 90 +/- 1.0. At a 60° beam angle, 400 LEDs produce a bright, even beam of light which is perfect for shoots in the studio or on location. The K4000 Plus comes packaged with the noteworthy Milk Diffusion Filter which creates a soft, glamorous light. The Milk Diffusion Filter now utilizes a snap-in, quick-release mounting system. This new mounting system will work in unison with additional accessories, giving users the ability to stack modifiers on top of one another. This secure mounting system allows the light to be rigged sideways or upside down without the possibility of accessories falling or sliding out.
The K4000 Plus has an expansion port which allows for installation of the SmartSync Control Circuit (SCC) as well as a DMX512 Module. The SCC module allows you to daisy chain multiple units together via CAT5 cables. When chained together, any light modified in the chain will cause all the other lights to dim in unison. The DMX512 Module allows for control of the lights with standard DMX512 dimmer boards.
$ 629.00 - Sold Out
F&V SKU: 18022003 | Helix SKU: FV18022003
Maximum Brightness
Utilizing a new lens design, the K4000S Power offers incredible brightness whenever maximum output is needed. Maintaining a 60° wide beam angle the K4000S Power creates up to 6420 lux @ 1m and can still be powered by a single V-Mount battery.
Vibrant Color Reproduction
With a TLCI of up to 99 (97±2) and a CRI of up to 97 (95±2), the Power fixtures raise the color reproduction to new heights, representing colors truthfully, neutral and vibrant.
New Attachment System
Incorporating the new F&V attachment system for light shaping accessories, the Power fixtures are compatible to the full range of tools like barndoors, honeycomb grids, diffusors, filter holders and softboxes.
Barcode | N/A |
---|---|
Manufacturer | F&V |
Country of Manufacture | China |
Illuminance | 6420 lux @1m, 1775 lux @1m, 789 lux @1m |
Color Temperature (CCT) | Bi-Color 3200 - 5600K (+/- 200K) |
Beam Angle | 75° (45° with KS-1 Intensifier - Sold Separately) |
Color Rendition | TLCI 95-99 (97±2), CRI 93-97 (95±2) |
Dimming | 0-100% Continuous |
Estimated LED Lifetime | 50,000 Hours (15 years of average use) |
Thermal Design | Silent Passive Cooling |
Power Options | V-Mount Battery, AC Adapter |
Power Consumption | 87 W Nominal, 90 W Maximum |
Power Voltage | 13 - 24 V DC |
Battery Lifetime | N/A |
Mounting Options | Yoke with 5/8" Mount |
Package Contents |
(1x) K4000S Power 1x1 LED Panel Light with V-Mount Plate (1x) V-Mount AC Adapter with Power Cord |
$ 1,399.00 - Sold Out
F&V SKU: 18020033 | Helix SKU: FV18020033
The K4000S SE Bi-Color Studio Panel light sports 200 daylight balanced LEDs and 200 tungsten balanced LEDs, allowing for seamless transition of white balance between 5600K to 3200K. The light offers 1534 Lux @ 1 meter with full daylight and 1332 Lux @ 1 meter with full tungsten. Carefully selected LEDs are put through multiple tests and evaluations to ensure perfect color balance and diode matching. This offers an absolute pure color consistency between LEDs, and a TLCI of 97.
The Milk-White Diffusion Filter packaged with our K4000S SE, is a translucent white diffusion filter that helps create a single light source. Not only does this offer an ultra-soft light but creates just a single shadow. Unlike most 1'x1' panels with open face LED sources which have the tendency for each diode to create cross-angled shadows, the Milk-White Diffusion Filter eliminates this problem, giving you an ultra-soft bright light source.
The light features new push-button accessory mounts which have allowed us to expand the accessory options to include grids, barn doors, and filter holders. (All sold separately) Accessories simply snap onto the front of the light for secure mounting. To remove the items, push in the button on each corner and the accessory is released.
There are several modules (sold separately) available to control multiple lights. The SmartSync Control Circuit Module allows multiple K4000 SE lights to be linked in series with standard CAT5 Cables. The DMX 512 Module will allow the lights to be controlled via a DMX control board. The Wifi module allows for wireless control of the lights through the optional remote or in the near future by iPhone app through the upcoming F&V Wifi router.
Perfect for professionals looking to gain complete control over their studio lighting rigs, the K4000 Daylight Panel offers exceptional light quality at an affordable price.
Package Contents:
(3x) K4000S SE 1x1 LED Panel Light with V-Mount Plate
(1x) Carrying Case
(3x) Milk Diffuser
(3x) V-Mount AC Adapter with Power Cord
Beam angle: | 50° |
White Balance: | 3200K to 5600K +/-200K |
Illuminance: | 3046 lux @ 1m |
Dimming: | 0-100% Continuous |
Estimated LED Lifetime: | 50,000 hours (15 years of average use) |
Color rendition: | TLCI 95-99 (97 +/-2), CRI 93-97 (94 +/-2) |
Thermal Design: | Silent Passive Cooling |
Mounting: | Receptor for Baby Pin, 5/8" Stud |
Ambient Temperature Operation: | -20 to +45 degrees C (-4 to +113 degrees F) |
Power voltage range: | 10 - 18 V DC |
Input Current Range: | Max 2.62A @ 10V / 1.46A @ 18V |
Power Consumption: | 25.5w Nominal, 26.2w Maximum |
Power Options: | AC Adapter (included), D-Tap, V-Mount Battery (sold separately) |
$ 539.00 $ 489.00 - Sold Out
F&V SKU: 18020003 | Helix SKU: FV18020003
The K4000S SE Bi-Color Studio Panel light sports 200 daylight balanced LEDs and 200 tungsten balanced LEDs, allowing for seamless transition of white balance between 5600K to 3200K. The light offers 1534 Lux @ 1 meter with full daylight and 1332 Lux @ 1 meter with full tungsten. Carefully selected LEDs are put through multiple tests and evaluations to ensure perfect color balance and diode matching. This offers an absolute pure color consistency between LEDs, and a TLCI of 97.
The Milk-White Diffusion Filter packaged with our K4000S SE, is a translucent white diffusion filter that helps create a single light source. Not only does this offer an ultra-soft light but creates just a single shadow. Unlike most 1'x1' panels with open face LED sources which have the tendency for each diode to create cross-angled shadows, the Milk-White Diffusion Filter eliminates this problem, giving you an ultra-soft bright light source.
The light features new push-button accessory mounts which have allowed us to expand the accessory options to include grids, barn doors, and filter holders. (All sold separately) Accessories simply snap onto the front of the light for secure mounting. To remove the items, push in the button on each corner and the accessory is released.
There are several modules (sold separately) available to control multiple lights. The SmartSync Control Circuit Module allows multiple K4000 SE lights to be linked in series with standard CAT5 Cables. The DMX 512 Module will allow the lights to be controlled via a DMX control board. The Wifi module allows for wireless control of the lights through the optional remote or in the near future by iPhone app through the upcoming F&V Wifi router.
Perfect for professionals looking to gain complete control over their studio lighting rigs, the K4000S SE Bi-color LED Panel offers exceptional light quality at an affordable price.
Package Contents:
(1x) K4000S SE 1x1 LED Panel Light with V-Mount Plate
(1x) Milk Diffuser
(1x) V-Mount AC Adapter with Power Cord
Beam angle: | 50° |
White Balance: | 3200K to 5600K +/-200K |
Illuminance: | 3046 lux @ 1m |
Dimming: | 0-100% Continuous |
Estimated LED Lifetime: | 50,000 hours (15 years of average use) |
Color rendition: | TLCI 95-99 (97 +/-2), CRI 93-97 (94 +/-2) |
Thermal Design: | Silent Passive Cooling |
Mounting: | Receptor for Baby Pin, 5/8" Stud |
Ambient Temperature Operation: | -20 to +45 degrees C (-4 to +113 degrees F) |
Power voltage range: | 10 - 18 V DC |
Input Current Range: | Max 2.62A @ 10V / 1.46A @ 18V |
Power Consumption: | 25.5w Nominal, 26.2w Maximum |
Power Options: | AC Adapter (included), D-Tap, V-Mount Battery (sold separately) |
$ 128.00 - Sold Out
F&V SKU: 10310004
The KS-2 is not only a soft box but also an intensifier. The reflective coating on the inside of the KS-2 focuses the light into a smaller beam angle which increases the brightness of the light up to 25%, while remaining to deliver a soft and even beam of light.
Intensifier for focused brightness
The KS-2 is not only a soft box but also an intensifier. The reflective coating on the inside of the KS-2 focuses the light into a smaller beam angle which increases the brightness of the light up to 25%, while remaining to deliver a soft and even beam of light.
Quick and easy setup
There is no complicated set-up with your KS-2. Just unfold the KS-2, and attach it to your light with two velcro straps.
Universal size
The KS-2 Soft Box can be adjusted to fit a wide variety of 1x2 panels from different manufacturers.
Two diffusion stages
Two diffusion stages allow for soft, even illumination across the face of the KS-2. Use one diffusion stage or both in order to adjust the softness and brightness of your light.
Grid for directional control
The KS-2 Soft Box includes a grid for directional control of your light. The grid attaches easily to the KS-2 via velcro.
SKU | 10310004 |
---|---|
Highlights |
|
Specs |
Nominal Dimensions of Soft Box Face: 30" x 18" Est. Light Increase without Diffusors: 1/3 stop Est. Light Loss with Close Diffusor: 1 stop (relative to increased brightness of light due to intensifier) Est. Light Loss with Far Diffusor: 1 stops (relative to increased brightness of light due to intensifier) Est. Light Loss with Close and Far Diffusor: 2 stops (relative to increased brightness of light due to intensifier) |
Package Contents |
(1x) KS-2 Soft Box (1x) Inner Diffuser (1x) Outer Diffuser (1x) Grid (1x) Carry Bag |
$ 49.00 - Sold Out
F&V SKU: 18095000 | Helix SKU: FV18095000
This updated version of the Camera L-Bracket for the R-300 ring light features and adjustable camera bracket which allows for a larger selection of cameras to be mounted to the R-300 including DSLRs with battery grips. The system attaches to the light with a hex screw. A thumb screw allows you to adjust the camera bracket up and down to fit your camera. This updated L-Bracket is compatible with the original R-300, R-300 SE, and R-300S SE.
Barcode | N/A |
---|---|
Manufacturer | F&V |
Country of Manufacture | China |
Specifications | N/A |
Package Contents |
(1x) L-Bracket SE (1x) Mounting Screw (1x) Allen Wrench |
Product Weight (lb) | N/A |
$ 74.95
F&V SKU: 10316002 | Helix SKU: FV10316002
The MDF-1 Milk Diffuser Filter Frame is a Milk Diffuser with metal frame which you can attach barn doors (sold separately). The frame snaps into the new quick release mounting system from F&V.
Compatible with the Z400S Soft, K4000 SE, K4000S SE, K4000 Power, and K4000S Power. Older lights are compatible once their corners have been upgraded to the new system.
$ 25.00 $ 18.00 - Sold Out
F&V SKU: 118151010000 | Helix SKU: FV118151010000
Using our unique method of mounting filters with magnetics, our Milk Diffusion Filter for the R-300 LED Ring Light is a denser option for diffusion, creating an ultra-soft light source. Not only does this offer beautiful, wrapping light, but also the thick diffusion makes it much easier for your talent to look in the direction of the light.
SKU | 118151010000 |
---|---|
Using our unique method of mounting filters with magnetics, our Milk Diffusion Filter for the R-300 LED Ring Light is a denser option for diffusion, creating an ultra-soft light source. Not only does this offer beautiful, wrapping light, but also the thick diffusion makes it much easier for your talent to look in the direction of the light. |
|
Highlights |
True Soft-Box Effect Beautiful Light that Wraps Around Your Subject Easier on Your Talents Eyes |
Specs | No |
Package Contents | (1x) Milk Diffusion Filter |
Feature Tags | Magnetic Filters |
$ 25.00 - Sold Out
The F&V Lighting Milk Diffusion Filter is suitable for the R-300 LED Ring Light. Using this unique method of mounting filters with magnetic; Milk Filter is a denser option for diffusion, creating an ultra-soft light source. Not only does this offer beautiful, wrapping light, but also the thick diffusion makes it much easier for your talent to look in the direction of the light.
$ 143.99 - Sold Out
Don't want to spend big bucks on expensive, large-capacity, li-ion batteries? Then try their new NP-F to 3-Stud Adapter. Utilizing the power of 2x NP-F batteries in series, these adapters allow you to power a variety of products, from 1x1 panels to cameras rigs, for hours at a time. This is a perfect solution for powering F&V's K4000 and Z400 LED Studio Panels, but it will also work with almost any 1x1 panel on the market.
Whether utilizing NP-F550 or NP-F770 batteries, this adapter is an inexpensive alternative to power your gear. You can have multiple, inexpensive NP-F batteries on stand-by to ensure you never run out of power. The NP-F to 3-Stud Adapter will most definitely to increase your flexibility when shooting on location. Allows you to adapt Sony NP-F batteries to gear already running on V-mount batteries. Take advantage of the NP-F batteries you have lying around and put them to use.
$ 54.99
Don't want to spend big bucks on expensive, large-capacity, li-ion batteries? Then try the F&V Lighting NP-F to 3-Stud Power Adapter (AB Gold Mount). Utilizing the power of 2x NP-F batteries in series, this adapter allows you to power a variety of products, from 1x1 panels to cameras rigs, for hours at a time. This is a perfect solution for powering F&V Lighting's K4000 and Z400 LED Studio Panels, but it will also work with almost any 1x1 panel.
Whether utilizing NP-F550 or NP-F770 batteries, this adapter is an inexpensive alternative to power your gear. You can have multiple, inexpensive NP-F batteries on stand-by to ensure you never run out of power. The NP-F to 3-stud Adapter will most definitely to increase your flexibility when shooting on location.
$ 149.00 - Sold Out
Nylon Carrying Case by F&V is designed to fit a quantity of three (3) LED panels in the 1x1 form factor. They Nylon Carrying Case is a hard case with nylon stitching on the outside. The corners and bottom of the case are reinforced with impact plastic. The case comes with two large dividers to separate and protect each light, as well as it comes with three smaller dividers for accessories.
SKU | 105010210001 |
---|---|
Highlights |
Nylon outer fabric over rigid, padded frame Reinforced impact corners and bottom sled Packaged with carrying strap, three (3) large dividers, and three (3) small dividers |
Specs |
Outside Dimensions: 20" L x 11" D x 18" H Inside Dimensions: 19" L x 9" D x 14.5" H |
Package Contents |
(1x) Case (1x) Carrying Strap (2x) Large Dividers (3x) Small Dividers |
$ 49.00
F&V SKU: 18095400 | Helix SKU: FV18095400
This kit enables you to mount your R-300 onto the front of the camera lens. The mount is compatible with the original R-300, R-300 SE, and R-300S SE. The mount consists of five parts. Two halves screw together on each side of the R-300. This base mount has an 82mm thread. The additional parts are step down rings that will allow the light to be mounted on 77mm, 72mm, and 67mm lens filter threads.
Please note: When the light is mounted to your lens we strongly recommend against powering the light with batteries. The added weight to the lens from the battery may have the ability to cause damage to certain lenses. We recommend using an AC Adapter or 2.5mm to D-Tap cable to power the light.
Package Contents |
(1x) Lens Mount with 82mm Thread (1x) 82mm - 67mm Lens Adapter Ring (1x) 82mm - 72mm Lens Adapter Ring (1x) 82mm - 77mm Lens Adapter Ring |
---|
$ 229.00 - Sold Out
F&V SKU: 18040100 | Helix SKU: FV18040100
The New F&V R-300 Ring Light features 300 daylight-balanced LEDs that produce 2205 Lux @ 1-meter with TLCI 97 +/- 2. An onboard dimmer offers seamless power variation from 0-100%. This daylight LED ring has two power options: a Sony NP-F Battery Plate and a DC 2.5mm jack (DV Battery and AC Adapter sold separately).
The F&V R-300 Daylight LED Ring Light has a 50 degree beam-angle. Its slim profile and light weight make it a perfect companion for shoots in the studio or on location. The R-300 is great for glamour, concert, events, and macro photography/videography.
The R-300 SE comes packaged with two magnetic filters: a Tungsten Filter and a Frost Diffusion Filter. The Tungsten Filter will calibrate your light to 3200K allowing you to shoot indoors under incandescent light. The Frost Diffusion Filter takes the edge off the light's beam and also can serve as a gel holder. Sold Separately is the Milk White Diffusion filter which creates a very soft, glamorous, and easy-to-look-at light source.
New to the R-300 SE Ring Light is the included lens mount. The mounts allow you to directly attach the daylight LED ring to the filter thread on your lens. Included in the kit are adapter rings for 82mm, 77mm, 72mm, and 67mm filter threads. The R-300 SE also has a 1/4”-20 thread on the bottom which can be attached to articulating arms, spigots, or other mounting devices.
The R-300 SE comes with a compact carrying case that will protect the light during transit.
Note – This version of the R-300 SE does not come with the L-Bracket, Battery or AC Adapter. Also, due to the compact size of the carrying case there is not enough room to fit the L-Bracket or AC Adapter.
Package Contents:
(1x) R-300 SE Light
(1x) Lens Mount
(1x) 82mm - 67mm Lens Adapter Ring
(1x) 82mm - 72mm Lens Adapter Ring
(1x) 82mm - 77mm Lens Adapter Ring
(1x) Tungsten Filter
(1x) Frost Filter
(1x) Compact Carrying Case
White Balance: | 5600K (+/- 200K) |
Color rendition: | TLCI 95-99 (97 +/-2), CRI 93-97 (95 +/-2) |
Beam angle: | 50 Degrees |
LED lifetime: | 50,000 hours (15 Years Average Use) |
Dimensions: | 1.8 x 8 x 8.2" (46 x 202 x 208 mm) |
Inside diameter: | 3.8" (96 mm) without Lens Mount |
Power draw: | 19.7w (at full power) |
Power Supply: | NP-F Battery or 2.5mm DC Jack (batteries and AC Adapter sold separately) |
Battery life at full power: | 78 minutes using a 4800mAh NP-F Battery |
$ 30.00
F&V SKU: 33905070 | Helix SKU: FV33905070
This travel case fits the original R-300, R-300 SE, and R-300S SE like a glove. The case is large enough to fit the light, filters, and a small np-f battery. Because of it's compact size, the case does not have enough room to fit the AC Adapter and L-Bracket when the light is inside.
Package Contents | (1x) Travel Case for R-300 |
---|
$ 279.00 $ 249.00 - Sold Out
F&V SKU: 18040000 | Helix SKU: FV18040000
The New R-300S SE Bi-Color features 150 daylight-balanced LEDs and 150 tungsten-balanced LEDs that that can be seamlessly blended to create a white balance range spanning 3200K to 5600K. An onboard dimmer offers seamless power variation from 0-100%. At full daylight the light features 1187 lux at 1 meter, while full tungsten is 1044 lux at 1 meter. It has two power options: a Sony NP-F Battery Plate and a DC 2.5mm jack (DV Battery and AC Adapter sold separately).
The R-300S SE has a 50 degree beam-angle. Its slim profile and light weight make it a perfect companion for shoots in the studio or on location. The light is great for glamour, concert, events, and macro photography/videography.
The R-300S SE comes packaged with a Frost Diffusion Filter that takes the edge off the light's beam and also can serve as a gel holder. Sold Separately is the Milk White Diffusion filter which creates a very soft, glamorous, and easy-to-look-at light source.
New to the R-300S SE Ring Light is the included lens mount. The mounts allow you to directly attach the light to the filter thread on your lens. Included in the kit are adapter rings for 82mm, 77mm, 72mm, and 67mm filter threads. The R-300S SE also has a 1/4”-20 thread on the bottom which can be attached to articulating arms, spigots, or other mounting devices.
The R-300S SE comes with a compact carrying case that will protect the light during transit.
Note – This version of the R-300 SE does not come with the L-Bracket, Battery or AC Adapter. Also, due to the compact size of the carrying case there is not enough room to fit the L-Bracket or AC Adapter.
Package Contents:
(1x) R-300S SE Bi-Color Light
(1x) Lens Mount
(1x) 82mm - 67mm Lens Adapter Ring
(1x) 82mm - 72mm Lens Adapter Ring
(1x) 82mm - 77mm Lens Adapter Ring
(1x) Frost Filter
(1x) Compact Carrying Case
White Balance: | 5600K to 3200K (+/- 200K) |
Color rendition: | TLCI 95-99 (97 +/-2), CRI 93-97 (95 +/-2) |
Beam angle: | 50 Degrees |
LED lifetime: | 50,000 hours (15 Years Average Use) |
Dimensions: | 1.9 x 8 x 8.2" (50 x 202 x 208 mm) |
Inside diameter: | 3.8" (96 mm) without Lens Mount |
Power draw: | 19.7w (at full power) |
Power supply: | NP-F Battery or 2.5mm DC Jack (Batteries and AC Adapter sold separately) |
Battery life at full power: | 78 minutes using a 4800mAh NP-F Battery |
$ 3.95
F&V SKU: K4000DIMMERKNOB / Helix SKU: FVK4000DIMMERKNOB
$ 14.95
F&V SKU: 34101272 / Helix SKU: FV34101272
Replacement Quick Release Mounts for Milk Diffusion Filter (4 Pack)
Only works with quick release corners.
$ 6.95 - Sold Out
F&V SKU: 43201031 Helix SKU: FV43201031
(K4000 / R-300 L-Bracket)
$ 79.99
F&V SKU: Digi 20 | Helix SKU: FVDIGI20
High brightness, lightweight and durable
Can be powered by F-550, F750, F970 lithium batteries
Suitable for all kinds of digital cameras and Sony DVR
Single lamp and dual lamp adjustable
F-750 battery can power it for 80 minutes
Constant current design
Stable light illumination design
$ 1,599.00 - Sold Out
F&V SKU: 18030000K3 | Helix SKU: FV18030000K3
UltraColor is now also UltraSoft
The UltraColor Z200S is the newest member of the F&V Soft panel series that combines bi-color, TLCI 99, brightness, compactness and that is passively cooled and super soft in a small, half-panel format.
Brightness | up to 2200 Lux@1m
The Z400S Soft and the optional intensifier are the perfect team when a powerful soft light is needed. With 901 lux @ 1m and with a beam angle of 130°, the Z400S Soft is already a very bright light. The intensifier concentrates the light into a 50° beam angle, increasing the brightness to an incredible 2200 lux @ 1m (5600K).
Colors as they should be
The UltraColor Soft series offers true color reproduction throughout the complete color temperature range. Rendered with absolute precision, skin tones and colors never looked better. CRI and TLCI measurements only give a small insight into how LED lights render the full spectrum, the UltraColor Soft series can shine beyond those values with a well balanced color response - creating beautiful images. Pure white light with a TLCI of up to 99.
True Softness - Single, Soft & Clean Shadow
The quality of a light is not only defined by its color and brightness, but also how it renders shadows. With a clean, single shadow that wraps nicely around subjects, the UltraColor Soft delivers stunning results. No stepped shadows, no uneven color, just pure soft light.
Barcode | 6949773304523 |
---|---|
Manufacturer | F&V |
Country of Manufacture | China |
Illuminance | 100% 5600K: 901 lux @1m, 226 lux @2m, 101 lux @3m; 100% 3200K: 796 lux @1m, 199 lux @2m, 89 lux @3m |
Color Temperature (CCT) | Bi-Color 3200 - 5600K (+/- 200K) |
Beam Angle | 130 Degrees |
Color Rendition | TLCI 97 - 99, CRI 96 - 98 |
Dimming | 0-100% Continuous |
Estimated LED Lifetime | 50,000 Hours (15 years of average use) |
Thermal Design | Silent Passive Cooling |
Power Options | AC Adapter |
Power Consumption | N/A |
Power Voltage | 12 - 24 V DC |
Battery Lifetime | N/A |
Mounting Options | Yoke with 5/8" Mount |
Package Contents |
(1x) Z200S Soft UltraColor Light (1x) AC Adapter |
$ 489.99
F&V SKU: 18030000 | Helix SKU: FV18030000
UltraColor is now also UltraSoft
The UltraColor Z200S is the newest member of the F&V Soft panel series that combines bi-color, TLCI 99, brightness, compactness and that is passively cooled and super soft in a small, half-panel format.
Brightness | up to 2200 Lux@1m
The Z400S Soft and the optional intensifier are the perfect team when a powerful soft light is needed. With 901 lux @ 1m and with a beam angle of 130°, the Z400S Soft is already a very bright light. The intensifier concentrates the light into a 50° beam angle, increasing the brightness to an incredible 2200 lux @ 1m (5600K).
Colors as they should be
The UltraColor Soft series offers true color reproduction throughout the complete color temperature range. Rendered with absolute precision, skin tones and colors never looked better. CRI and TLCI measurements only give a small insight into how LED lights render the full spectrum, the UltraColor Soft series can shine beyond those values with a well balanced color response - creating beautiful images. Pure white light with a TLCI of up to 99.
True Softness - Single, Soft & Clean Shadow
The quality of a light is not only defined by its color and brightness, but also how it renders shadows. With a clean, single shadow that wraps nicely around subjects, the UltraColor Soft delivers stunning results. No stepped shadows, no uneven color, just pure soft light.
Barcode | 6949773304523 |
---|---|
Manufacturer | F&V |
Country of Manufacture | China |
Illuminance | 100% 5600K: 901 lux @1m, 226 lux @2m, 101 lux @3m; 100% 3200K: 796 lux @1m, 199 lux @2m, 89 lux @3m |
Color Temperature (CCT) | Bi-Color 3200 - 5600K (+/- 200K) |
Beam Angle | 130 Degrees |
Color Rendition | TLCI 97 - 99, CRI 96 - 98 |
Dimming | 0-100% Continuous |
Estimated LED Lifetime | 50,000 Hours (15 years of average use) |
Thermal Design | Silent Passive Cooling |
Power Options | AC Adapter |
Power Consumption | N/A |
Power Voltage | 12 - 24 V DC |
Battery Lifetime | N/A |
Mounting Options | Yoke with 5/8" Mount |
Package Contents |
(1x) Z200S Soft UltraColor Light (1x) AC Adapter |
$ 1,149.00 - Sold Out
F&V SKU: 109030130231AB | Helix SKU: FV109030130231AB
UltraColor is now also UltraSoft
The UltraColor Z400S is the newest member of the F&V Soft panel series that combines bi-color, TLCI 99, brightness, compactness and that is passively cooled and super soft.
Brightness | up to 4400 Lux@1m
The Z400S Soft and the optional KS-1 intensifier are the perfect team when a powerful soft light is needed. With 1841 lux @ 1m and with a beam angle of 130°, the Z400S Soft is already a very bright light. The KS-1 intensifier concentrates the light into a 50° beam angle, increasing the brightness to an incredible 4400 lux @ 1m (5600K).
Colors as they should be
The UltraColor Soft series offers true color reproduction throughout the complete color temperature range. Rendered with absolute precision, skin tones and colors never looked better. CRI and TLCI measurements only give a small insight into how LED lights render the full spectrum, the UltraColor Soft series can shine beyond those values with a well balanced color response - creating beautiful images. Pure white light with a TLCI of up to 99.
True Softness - Single, Soft & Clean Shadow
The quality of a light is not only defined by its color and brightness, but also how it renders shadows. With a clean, single shadow that wraps nicely around subjects, the UltraColor Soft delivers stunning results. No stepped shadows, no uneven color, just pure soft light.
Barcode | N/A |
---|---|
Manufacturer | F&V |
Country of Manufacture | China |
Illuminance | 100% 5600K: 1841 lux @1m, 460 lux @2m, 205 lux @3m; 100% 3200K: 1599 lux @1m, 400 lux @2m, 178 lux @3m |
Color Temperature (CCT) | Bi-Color 3200 - 5600K (+/- 200K) |
Beam Angle | 130 Degrees |
Color Rendition | TLCI 97-99, CRI 96-98 |
Dimming | 0-100% Continuous |
Estimated LED Lifetime | 50,000 Hours (15 years of average use) |
Thermal Design | Silent Passive Cooling |
Power Options | N/A |
Power Consumption | 87 W Nominal, 90 W Maximum |
Power Voltage | 12-24V DC |
Battery Lifetime | N/A |
Mounting Options | Yoke with 5/8" Mount |
Package Contents |
(1x) UltraColor Z400s Bi-Color Panel (1x) V-Mount AC Adapter (1x) KS-1 Softbox and Intensifier (1x) Pro Case for 1x1 Panels The Anton Bauer version comes with an Anton Bauer Battery to V-Mount Plate Adapter |
$ 1,099.00 - Sold Out
F&V SKU: 109030130231 | Helix SKU: FV109030130231
UltraColor is now also UltraSoft
The UltraColor Z400S is the newest member of the F&V Soft panel series that combines bi-color, TLCI 99, brightness, compactness and that is passively cooled and super soft.
Brightness | up to 4400 Lux@1m
The Z400S Soft and the optional KS-1 intensifier are the perfect team when a powerful soft light is needed. With 1841 lux @ 1m and with a beam angle of 130°, the Z400S Soft is already a very bright light. The KS-1 intensifier concentrates the light into a 50° beam angle, increasing the brightness to an incredible 4400 lux @ 1m (5600K).
Colors as they should be
The UltraColor Soft series offers true color reproduction throughout the complete color temperature range. Rendered with absolute precision, skin tones and colors never looked better. CRI and TLCI measurements only give a small insight into how LED lights render the full spectrum, the UltraColor Soft series can shine beyond those values with a well balanced color response - creating beautiful images. Pure white light with a TLCI of up to 99.
True Softness - Single, Soft & Clean Shadow
The quality of a light is not only defined by its color and brightness, but also how it renders shadows. With a clean, single shadow that wraps nicely around subjects, the UltraColor Soft delivers stunning results. No stepped shadows, no uneven color, just pure soft light.
Barcode | N/A |
---|---|
Manufacturer | F&V |
Country of Manufacture | China |
Illuminance | 100% 5600K: 1841 lux @1m, 460 lux @2m, 205 lux @3m; 100% 3200K: 1599 lux @1m, 400 lux @2m, 178 lux @3m |
Color Temperature (CCT) | Bi-Color 3200 - 5600K (+/- 200K) |
Beam Angle | 130 Degrees |
Color Rendition | TLCI 97-99, CRI 96-98 |
Dimming | 0-100% Continuous |
Estimated LED Lifetime | 50,000 Hours (15 years of average use) |
Thermal Design | Silent Passive Cooling |
Power Options | N/A |
Power Consumption | 87 W Nominal, 90 W Maximum |
Power Voltage | 12-24V DC |
Battery Lifetime | N/A |
Mounting Options | Yoke with 5/8" Mount |
Package Contents |
(1x) UltraColor Z400s Bi-Color Panel (1x) V-Mount AC Adapter (1x) KS-1 Softbox and Intensifier (1x) Pro Case for 1x1 Panels The Anton Bauer version comes with an Anton Bauer Battery to V-Mount Plate Adapter |
$ 49.00
F&V SKU: 10911010 | Helix SKU: FV10911010
This wired dimmer allows you to control the intensity on the F&V LED Panel Lights that have a serial port on the back. The cable length is 90" allowing the user to be more than 7 feet away from the light.
$ 129.00
F&V SKU: 18098600 | Helix SKU: FV18098600
The WR-1 Wireless Router creates a Wifi hotspot to allow users to control Wifi enabled F&V lights with the smart phone app. The app can control the intensity of the lights and on the bi-color lights it can control the color temperature. The app also allows you to save pre-sets lighting groups so you can quickly recall the settings.
With two antennas and a strong built-in battery, the WR-1 offers unparalleled transmission power and can control F&V panels up to 30m away from the router.
Protected by an aluminum housing, the WR-1 is rugged and lightweight. With the compact housing the WR-1 never gets in the way.
With the included lanyard you can easily carry the WR-1 around your neck so that it is always in close proximity to your modbile device. If you don't want to carry the router around, you can attach it with its built-in magnet to any magnetic surface such as the back of a F&V panel. The lanyard mount can also be removed to reveal a 1/4"-20 female thread as an additional mounting option.
The built-in lithium-ion battery lasts up to 20 hours and can easily be recharded with the included USB cable. In a fixed environment the WR-1 can be permanently powered via the USB port.
The WR-1 is compatible with the Z720S and also with any panel light that has the Wifi Module installed.
The easiest way to find the app is by scanning the following QR codes with your iOS or Android mobile phone. To use the Wireless Router turn on the lights and the WR-1. On your smartphone or tablet connect to the Wifi hotspot called F&V_WIFI_2.4G and enter the password found in the manual. Once connected you can start up the app to control the lights.
Phones have very limited transmission power because of small integrated antennas and the power fort he antenna is limited to reserve power for other tasks. To provide more reliable control of Wifi enabled lights, F&V has developed the Wifi Wireless Router with long range antennas.
$ 1,699.00 - Sold Out
The Location Kit includes the Z1200VC CTD-Soft Light with controller, Lollipop Stand Mount, and V-Mount Battery Plate.
Vari-Color, Better than Bi-Color
Vari-Color fixtures offer a true fit to the Planckian Locus (Black Body Curve) with true tint-less white light throughout the color temperature range.
Wide Color Temperature Range
White-Light Mode offers maximum color reproduction from 2800K to 6500K. For more extreme color temperatures the Extended Kelvin Mode offers a CCT range from 2400K to 9900K.
Fully Tunable Color Mode
In HIS Mode any color can be selected by controlling the HUE, Saturation, and Intensity of the light. Colors can also be controlled by X,Y coordinates to quickly recreate colors measured with a spectrometer. RGBDT Mode offers full control on a LED level.
Always True Color
Calibrated at the factory to ensure consistency from the beginning with virtually no variance from light to light. To help ensure the light remains consistent after use it can be recalibrated by the user for accurate colors and color temperatures.
Tint Control +/- GM Adjustment
With the tint control a user can tin the light to adjust the Green and Magenta.
Filter Mode
The light has a built-in digital filter library of more than 300 popular color and correction filters to allow you to “gel” the light without light-loss or having to carry filters.
Effects
With a range of pre-programmed and adjustable it’s easy to quickly create interesting lighting setups for video. Effects include Party, Candle Light, Club Scene, Lightning, Cop Car, Fireworks, Fire, and more.
Silent Use on Set
The Z1200VC CTD-Soft is perfect for use on stage as it’s sophisticated passive cooling system creates no noise unlike loud fan-cooled alternatives.
Bright and Soft
Extraordinary brightness throughout the color temperature range is a key strength of the Z1200VC CTD-Soft. With a beam angle of 130° it creates even, homogenous, soft quality light. With the intensifier (sold separately) the light can be focused into a narrower beam for a high lux of 14,338 at 1 meter.
Stay in Control
The light can be controlled from a distance using a DMX 512 controller or wirelessly via WiFi Remote or with the WiFi App using the WR-1 Wireless Router (both sold separately).
0-100% Continuous Dimming
With two dedicated knobs, brightness can be controlled continuously from 0-100%. One knob is used for quick adjustments, while the other is used for micro-fine adjustments to the brightness.
Dimming Curves
The Z100VC CTD-Soft offers 4 Different user-selectable dimming curves.
Mounting Options
The light features a Central Lollipop Mount allowing it to be mounted freely in any direction. For lighting installations and studio use an optional yoke can be purchased separately.
Powering Options
The light can be powered via included AC Adapter (sold separately), or with two V-Mount Batteries using the 2-Slot Battery Plate (included).
Barcode | 6949773304578 |
---|---|
Manufacturer | F&V |
Country of Manufacture | China |
Illuminance | 3200K: 6000 Lux @1m; 5600K: 5760 Lux @1m; 3200K w/ Intensifier: 14338 Lux @1m; 5600K w/ Intensifier: 13765 Lux @1m |
Color Temperature (CCT) | 2800 - 6500K White-Light Mode; 2400 - 9900K Extended Kelvin Mode |
Beam Angle | 130 Degrees |
Color Rendition | TLCI 97 - 99, CRI 96 - 98 |
Dimming | 0-100% Continuous |
Estimated LED Lifetime | 50,000 Hours (15 years of average use) |
Thermal Design | Silent Passive Cooling |
Power Options | V-Mount Battery, AC Adapter, Please note Batteries are SOLD SEPARATELY |
Power Consumption | 245 W Nominal, 270 W Maximum |
Power Voltage | 24 - 36 V DC |
Battery Lifetime | n/a |
Mounting Options | Lollipop Stand Mount, Optional Yoke Mount (sold separately) |
Package Contents |
(1x) Z1200VC CTD Light Head |
$ 2,699.00 - Sold Out
The Studio Kit includes the Z1200VC CTD-Soft Light with controller, Lollipop Stand Mount, AC Adapter, Battery Plate, Handle Pair, Extended Control Cable, and a Hard Flight Carrying Case.
Vari-Color, Better than Bi-Color
Vari-Color fixtures offer a true fit to the Planckian Locus (Black Body Curve) with true tint-less white light throughout the color temperature range.
Wide Color Temperature Range
White-Light Mode offers maximum color reproduction from 2800K to 6500K. For more extreme color temperatures the Extended Kelvin Mode offers a CCT range from 2400K to 9900K.
Fully Tunable Color Mode
In HIS Mode any color can be selected by controlling the HUE, Saturation, and Intensity of the light. Colors can also be controlled by X,Y coordinates to quickly recreate colors measured with a spectrometer. RGBDT Mode offers full control on a LED level.
Always True Color
Calibrated at the factory to ensure consistency from the beginning with virtually no variance from light to light. To help ensure the light remains consistent after use it can be recalibrated by the user for accurate colors and color temperatures.
Tint Control +/- GM Adjustment
With the tint control a user can tin the light to adjust the Green and Magenta.
Filter Mode
The light has a built-in digital filter library of more than 300 popular color and correction filters to allow you to “gel” the light without light-loss or having to carry filters.
Effects
With a range of pre-programmed and adjustable it’s easy to quickly create interesting lighting setups for video. Effects include Party, Candle Light, Club Scene, Lightning, Cop Car, Fireworks, Fire, and more.
Silent Use on Set
The Z1200VC CTD-Soft is perfect for use on stage as it’s sophisticated passive cooling system creates no noise unlike loud fan-cooled alternatives.
Bright and Soft
Extraordinary brightness throughout the color temperature range is a key strength of the Z1200VC CTD-Soft. With a beam angle of 130° it creates even, homogenous, soft quality light. With the intensifier (sold separately) the light can be focused into a narrower beam for a high lux of 14,338 at 1 meter.
Stay in Control
The light can be controlled from a distance using a DMX 512 controller or wirelessly via WiFi Remote or with the WiFi App using the WR-1 Wireless Router (both sold separately).
0-100% Continuous Dimming
With two dedicated knobs, brightness can be controlled continuously from 0-100%. One knob is used for quick adjustments, while the other is used for micro-fine adjustments to the brightness.
Dimming Curves
The Z100VC CTD-Soft offers 4 Different user-selectable dimming curves.
Mounting Options
The light features a Central Lollipop Mount allowing it to be mounted freely in any direction. For lighting installations and studio use an optional yoke can be purchased separately.
Powering Options
The light can be powered via included AC Adapter (sold separately), or with two V-Mount Batteries using the 2-Slot Battery Plate (included).
Barcode | 6949773304578 |
---|---|
Manufacturer | F&V |
Country of Manufacture | China |
Illuminance | 3200K: 6000 Lux @1m; 5600K: 5760 Lux @1m; 3200K w/ Intensifier: 14338 Lux @1m; 5600K w/ Intensifier: 13765 Lux @1m |
Color Temperature (CCT) | 2800 - 6500K White-Light Mode; 2400 - 9900K Extended Kelvin Mode |
Beam Angle | 130 Degrees |
Color Rendition | TLCI 97 - 99, CRI 96 - 98 |
Dimming | 0-100% Continuous |
Estimated LED Lifetime | 50,000 Hours (15 years of average use) |
Thermal Design | Silent Passive Cooling |
Power Options | V-Mount Battery, AC Adapter, Please note Batteries are SOLD SEPARATELY |
Power Consumption | 245 W Nominal, 270 W Maximum |
Power Voltage | 24 - 36 V DC |
Battery Lifetime | n/a |
Mounting Options | Lollipop Stand Mount, Optional Yoke Mount (sold separately) |
Package Contents |
(1x) Z1200VC CTD Light Head |