Kupo Scraper with Baby 5/8-Inch (16mm) Stud, KG003812
$ 17.00
The Scraper is stiff bladed putty knife with a built in baby 5/8 (16mm) stud. The 0.04 (1.1mm) thin metal blade is designed for jamming into the gap between a door and its frame, placed under a stack of books or between two books on a shelf, clamped to a ladder step, etc. The baby 5/8 (16mm) stud has a safety indentation for securely hanging small lighting fixtures. There are three holes drilled into the blade designed as anchor points for mounting by screws or nails.
Kupo Swivel Extension Arm, Hex Stud to 5/8-Inch (16mm) Receiver, KG001712
$ 35.95
The KG001712 is a mini extension arm with a hexagonal stud on one side, designed for the Convi and Super Viser clamps, and a baby 5/8 (16mm) receiver on the other. It has a double ball elbow joint giving you the ability to articulate the two sides in any direction.
Kupo Tilting Umbrella Adapter with KG000912 & KG001112 Studs KG007012
$ 42.95
This adapter enables you to use an umbrella with light fixtures that don't have a place to accept an umbrella shaft.
Kupo Tiny Clamp with 1/4 Inches-20 M KG300912
$ 14.95
This little clamp is a grip arm's best friend! It consists of a 1/4"-20 male thread on one side and a small receiver to accept any stud or tubing up to 5/8" (16mm) in diameter. This is the perfect accessory to mount monitors, off camera flashes, etc.
Kupo Universal 5/8-Inch (16mm) Stud, 3/8-Inch-16 M and 1/4-Inch-20 M Threads, KG001212
$ 10.59
The KG001212 is a universal double-sided, baby 5/8 (16mm) stud with 1/4-20 male thread on one side and a 3/8-16 thread on the other. The stud is round and will fit into any 5/8 (16mm) receiver. The KG001212 is the replacement stud for the Kupo light stands KS040111 KS040111. The KG001212 is made from brass.
Manfrotto 035 Super Clamp without Stud - Replaces 2915
$ 36.99 - Sold Out
This is an Ideal clamp for many photographic applications. Utilizing an ergonomic lever to securely lock clamping position, it clamps easily and securely. This replaces the Manfrotto 2915. Attachment (bottom): 16mm hexagonal + M5 & 1/4" threads; clamp range - max. (round tube): 2.17 in.; clamp range - min (round tube): 0.51 in.; color: black; load capacity: 33.07 lbs.; material: aluminum; weight: 0.90 lbs.
Manfrotto 035RL Super Clamp with 2908 Standard Stud - Replaces 2900 - Black
$ 35.99 - Sold Out
The original Super Clamp that has thousands of uses. No camera bag should be without one. The Super Clamp holds just about everything: cameras, lights, umbrellas, hooks, shelves, plate glass, cross bars, even other Super Clamps! And they hold these items to just about everything: poles, posts, tripod legs, pipes, doors, stands, and beams - virtually any support you can get the Super Clamps wide jaws around. This clamp replaces the Manfrotto 2900.
Manfrotto 038 Double Super Clamp
$ 75.99 - Sold Out
This is a special spigot for the De Sisti & laniro lighting fixture.
Manfrotto 041 L-Bracket Shelf Holders - Replaces 2901 (Set of 2)
$ 20.50 - Sold Out
this is a set of two brackets to use in combination with Super Clamp 035 to support shelves, etc. This replaces the Manfrotto 2901. color: black; depth: 1.57 in.; length: 6.69 in.; material: aluminum; weight: 0.64 lbs.
Manfrotto 061 Joining Stud for Super Clamps - Replaces 2913
$ 7.18 - Sold Out
This Joining Stud is a great accessory for your Manfrotto Super Clamps. This Connects 2 Super Clamp 035 with 6 step fixed rotation for great flexibility in adjustment. This replaces the Manfrotto 2913. Material: aluminum; weight: 0.06 lbs.
Manfrotto 066 Double Female Stud for Super Clamp - Replaces 3113
$ 7.18 - Sold Out
This Double Female Stud Plugs into Super Clamp 035 to provide either a 3/8" or 1/4" female thread fixing. this replaces the Manfrotto 3113. Attachment: 1/4" female thread; attachment 2: 3/8" female thread; material: brass; weight: 0.06 lbs.
Manfrotto 143 Magic Arm Kit with Umbrella Bracket Super Clamp and Backlite Base
$ 194.99 - Sold Out
This kit consists of an articulated arm with centre lever to lock all 3 movements and is supplied with a Camera/Umbrella Bracket 143BKT, Super Clamp 035 and Backlite Base 003. This kit gives the ultimate in flexibility for positioning your camera or a small light. Attachment: 16mm with 1/4" female attachment; attachment 2: 16mm with 3/8" female attachment and Camera Bracket; color: black; length: 20.87 in.; load capacity: 6.61 lbs.; material: aluminum; weight: 5.62 lbs.
Manfrotto 196AC Universal Clamp for Articulated Arm and Magic Arm (Black)
$ 22.55
Attach an articulated or magic arm to items 2 mm to 16 mm thick. clamp range - max. (round tube): 0.63 in.; clamp range - min (round tube): 0.08 in.; color: black; material: steel; weight: 0.13 lbs. This replaces the Manfrotto 2938.
Manfrotto 196B-2 143BKT 2-Section Single Articulated Arm with Camera Bracket (Black)
$ 59.99 - Sold Out
This is a more versatile version of Bogens single articulated arm. A telescopic features makes this product even more compact than before and a camera bracket allows precise camera angles. Arm tube diameters: 13mm.; attachment (bottom): 16mm spigot with 1/4-Inch thread; camera bracket with 16mm spigot and camera attachment; color: black; load capacity at maximum extension: 3.31 lbs. material: aluminum; maximum length: 23.82 in.; 2 sections; weight: 1.17 lbs.
Manfrotto 635 Quick-Action Super Clamp (Black)
$ 63.99 - Sold Out
A great update to a traditional favorite, the rapid action locking jaw has also been applied to the most well known clamp in the world, the original Super Clamp. These modifications allow us to keep its extreme versatility adding unrivaled speed in locking and unlocking. Supplied with wedge to allow the clamp to fit on flat surface. Attachment (bottom): 16mm hexagonal and M5 and 1/4-Inch threads; clamp range - max. (round tube): 0.51 in.; clamp range - min (round tube): 2.17 in.; color: black; load capacity: 33.07 lbs.; material: aluminum; weight: 1.04 lbs.
Manfrotto Adjustable Mounting Bracket
$ 32.99
The Manfrotto Adjustable Mounting Bracket is a part of the Bogen/IFF Studio Rail System. It allows height differences in ceilings of maximum 2cm; combining two brackets you can compensate for differences of maximum 4cm.
Manfrotto FF3276 Steel Safety Cable
$ 17.43 - Sold Out
The Bogen/Manfrotto FF3276 Steel Safety Cable is a failsafe system for grip equipment that fails to hold to overhead mounted lighting fixtures. One end attaches to the fixture; the other is tethered to a rail, pipe, ceiling, or wall. It will hold 44 lbs (22kg) and comes complete with spring catch and hook-up slot. It is recommended for telescopic post or top pantograph in order to avoid accidental falling of equipment.
Manfrotto Mounting Bracket Ceiling Fixture for Overhead Lighting Systems, (0940)
$ 14.35 - Sold Out
Drop ceiling supports are used to attach the fixed rails where the height of the ceiling or support surface would leave the rails too far from the floor level, if mounted with the standard fittings.
Photogenic 30" Upright Column with 5/8" Top & 1/4 x 20 Screw Thread, 3 Section with 2 Risers, Fits FB12 Base, Chrome.
$ 39.95
Three-foot telescoping air-cushioned upright column. Constructed from medium gauge aluminum, with a brushed anodized finish. Furnished with a 5/8" adapter with 1/4 x 20 threaded top, and a thumb screw to secure over 5/8" adapters. For use with FB12 folding base with 5/8" adapter, as shown here.
Photogenic Adjustable Counterweight for Powerlights (PLCW)
$ 66.95
Adjustable counterweight for weight balancing of PowerLight when fitted with accessories.
Pipe Clamp with 5/8" Stud
$ 29.99 - Sold Out
This pipe clamp will allow you to mount monolights, LEDs, or any device with a 5/8" mount. The clamp will fit onto pipes or tables up to 1.75 inches thick. The clamp features two mounting points: a 5/8" stud at the end, and a 3/8"16 female thread at the back of the clamp.
Plastic Swivel Umbrella Adapter
$ 33.00
The plastic swivel umbrella adapter attaches to stands that have a 5/8" stud. It enables the adjusting of pan and tilt for a light and most importantly it has a receiver for holding an umbrella. The Holder has two, two-way 5/8"; female receivers on the top and bottom. Both receivers can be used either vertically or horizontally, whether being mounted vertically on a stud or horizontally on the arm of a c-stand.
Studio-Assets 1" A Clamp SA1887
$ 1.95 - Sold Out
You'll find hundreds of uses for the 1" A Clamp. The all-metal spring clamp features protective plastic coverings on the handles and clamp tips so they won't scratch nor cut into foam boards.
Studio-Assets 2" A Clamp
$ 2.95 - Sold Out
You'll find hundreds of uses for the 2" A Clamp. The all-metal spring clamp features protective plastic coverings on the handles and clamp tips so they won't scratch nor cut into foam boards.
Studio-Assets 2.5" Grip Head (Black)
$ 24.95
This 2.5" Grip Head allows you to attach arms, flags, or other accessories to C-stands and poles. The head has four different size grip holes allowing it to clamp onto a variety of different sizes pole, arms, and mounts. The large handle with roller bearings enables you to apply a lot of torque for maximum grip.
Studio-Assets 2.5" Grip Head (Silver)
$ 24.95
This 2.5" Grip Head allows you to attach arms, flags, or other accessories to C-stands and poles. The head has four different size grip holes allowing it to clamp onto a variety of different sizes pole, arms, and mounts. The large handle with roller bearings enables you to apply a lot of torque for maximum grip.
Studio-Assets 20" Arm for Grip Head (Black)
$ 12.95 - Sold Out
This 20" Arm is made of steel and can be used with a grip head as a short boom to hold flags, gobos, lights, or other accessories.
Studio-Assets 20" Arm for Grip Head (Silver)
$ 13.95 - Sold Out
This 20" Arm is made of steel and can be used with a grip head as a short boom to hold flags, gobos, lights, or other accessories.
Studio-Assets 3" A Clamp
$ 5.95 - Sold Out
You'll find hundreds of uses for the 3" A Clamp. The all-metal spring clamp features protective plastic coverings on the handles and clamp tips so they won't scratch nor cut into foam boards.
Studio-Assets 4-1/2" Grip Head with 1-1/8" Receiver and 5/8" Baby Pin
$ 69.95
The 4-1/2" Grip Head mounts to a junior stand and features a 1-1/8" receiver along with a rotating disc that holds accessories with a 5/8" or 3/8" mounting stud. A large ergonomic handle allows users to firmly secure accessories mounted in the rotating disc. The grip head comes with a junior to baby pin adapter.
Studio-Assets 40" Arm for Grip Head (Black)
$ 29.95 - Sold Out
This 40" Arm is made of steel and can be used with a grip head as a short boom to hold flags, gobos, lights, or other accessories.
Studio-Assets 40" Arm for Grip Head (Silver)
$ 39.95 - Sold Out
This 40" Arm is made of steel and can be used with a grip head as a short boom to hold flags, gobos, lights, or other accessories.
Studio-Assets Articulating Baby Plate
$ 33.95
Articulating Baby Plate
The articulating baby plate has a swiveling 5/8" baby pin mounted to a heavy duty steel plate. The plate has eight mounting holes for use with screws or nails (not included). Features: perfect for mounting to a wall or apple box; standard 5/8" male stud w/ articulating ball joint; pre-drilled holes for mounting via screws or nails; ergonomic lock knob.
Highlights
Perfect for Mounting to a Wall or Apple Box
Made from Strong Aluminum Alloy
Standard 5/8" Male Stud w/ Articulating Ball Joint
Pre-drilled Holes for Mounting via Screws or Nails
Ergonomic Lock Knob
Package Contents
(1x) Articulating Baby Plate
Outside Dimensions No
Inside Dimensions No
Product Weight (lb) 1.5 lb (0.7 kg)
Material Steel
Manufacturer Studio Assets
Studio-Assets Baby to Junior Pin Adapter
$ 15.95 - Sold Out
Machined from solid steel, this adapter will convert any junior receptor to a 5/8" baby pin.
Studio-Assets Center Jaw Vise Grip with 3" Mouth
$ 44.95
Studio-Assets Center Jaw Vise Grip with 3" Mouth
Studio-Assets SKU: SA1684 | Helix SKU: SA1684
Overview
This Center Jaw Vise Grip can clamp onto poles or flat surfaces up to 3 inches thick. At one end of the clamp is a 5/8" pin to mount lights or other studio equipment to the vise grip. Because the vise mouth is at the center, the light will always be the same distance from the clamp regardless of how thick the surface the vise grip is attached to.
Product Weight: 1 lb (0.5 kg)
Material: Steel
Manufacturer: Studio-Assets
Package Contents:
(1x) Center Jaw Vise Grip - 3"
Studio-Assets Clamp with 5/8" Receiver
$ 11.95
Clamp with 5/8" Receiver
This clamp has a wide 3-inch mouth that can open up to fit onto bars and tables up to 1.5" thick. The mouth has rubber feet to protect surfaces from being scratched. On the side of the clamp is a 5/8" stud with a 3/8" mount. At the back of the clamp is a 5/8" receptor to add to the mounting options of this versatile clamp.
Highlights
› Clamp fits bars up to 1.6"
› 5/8" Stud with 3/8" Socket
› 5/8" Socket with Thumb Lock
Package Contents
(1x) Clamp with 5/8" Receptor
Outside Dimensions N/A
Inside Dimensions N/A
Product Weight (lb) 0.5 lb (0.2 kg)
Material Aluminum Alloy
Manufacturer Studio Assets
Studio-Assets Double Ended Spigot with 1/4"-20 and 3/8"-16 Female Threads
$ 9.95
This double ended 5/8" stud has a 3/8"-16 female thread on one end and a 1/4"-20 female thread on the other.
Studio-Assets Double Ended Spigot with 1/4"-20 and 3/8"-16 Male Threads
$ 9.95 - Sold Out
Double Ended Spigot with 1/4"-20 and 3/8"-16 Male Threads
This double ended 5/8" stud has a 3/8"-16 male thread on one end and a 1/4"-20 male thread on the other.
Highlights
› 5/8" Diameter Stud
› 1/4-20" and 3/8" Male Threads
Package Contents
(1x) Double Ended Spigot with 1/4"-20 and 3/8"-16 Male Threads
Outside Dimensions N/A
Inside Dimensions N/A
Product Weight (lb) 0.13 lb (0.1 kg)
Material Brass
Manufacturer Studio Assets
Studio-Assets End Jaw Vise Grip with 2.5" Mouth
$ 39.95 - Sold Out
This End Jaw Vise Grip can clamp onto poles or flat surfaces up to 2.5 inches thick. At the opposite end of the clamp is a 5/8" pin to mount lights or other studio equipment to the vise grip.
Studio-Assets End Jaw Vise Grip with 7" Mouth
$ 44.95 - Sold Out
End Jaw Vise Grip with 7" Mouth
This End Jaw Vise Grip can clamp onto poles or flat surfaces up to 7 inches thick. At the opposite end of the clamp is a 5/8" pin to mount lights or other studio equipment to the vise grip.
Package Contents
(1x) End Jaw Vise Grip - 7"
Outside Dimensions No
Inside Dimensions No
Product Weight (lb) 1 lb (0.5 kg)
Material Steel
Manufacturer Studio Assets
Studio-Assets Foam Core Fork
$ 19.95 - Sold Out
The Foam Core Fork allows foam core board or thick styrene to be mounted to clamps or grip arms to be used as a reflector or flag. The fork has a 3/8"-16 threaded hole for mounting. It also includes a brass double-ended stud for additional mounting options.
Studio-Assets Junior Clamp
$ 18.50
The Junior Clamp has a mouth opening of 1.75 inches and can attach to both flat and round tubes. It has a 1/4"-20 and 3/8"-16 threaded holes that allow you to attach a variety of accessories such as an articulating arm. The Junior Clamp has a reinforced rubber lining on the mouth that allows for a no-slip grip. This clamp is strong yet small in size and is easily stored in the pocket of your kit bag or clothing.
Studio-Assets Large Gaffer Clamp
$ 58.95 - Sold Out
Studio-Assets Large Gaffer Clamp
Studio-Assets SKU: SA1686 | Helix SKU: SA1686
Overview
The Large Gaffer Clamp has jaws that are adjustable to clamp on diameters between 15mm to 80mm. The jaws have non-marring rubber to protect surfaces from scratches. On one of the jaws is a fixed baby pin, while at the back of the handle is a receptacle with a removable baby pin.
Studio-Assets Standard Stud for Super Clamp
$ 4.95
The Standard Stud for Studio Clamps features a 5/8" hex stud mount on one end and a 5/8" Round stud mount on the other with a 3/8"-16 male thread.
Studio-Assets Studio Clamp with 5/8" Stud
$ 19.99 - Sold Out
Studio-Assets Studio Clamp with 5/8" Stud
Studio-Assets SKU: SA1802 | Helix SKU: SA1802
Overview
The Super Clamp is heavy-duty yet lightweight, and can be used in a variety of situations. Commonly it is used in a studio setting, allowing you to hang your light on an overhead grid. The Super Clamp can also be used to mount your light or accessories on a pole, pipe, or stand. It will work on tube diameters up to 2 1/4". The Super Clamp has a rubberized mouth to allow for enhanced friction to securely hold your fixture in place. With the included wedge adapter, the Super Clamp can be used on flat surfaces, such as shelves, table edges, and doors. With the wedge filled, the mouth of the Super Clamp is flat. The clamp has a 1/4"-20 female thread as well as a 5/8" socket for mounting equipment. It also comes with a reversible 5/8" stud. One side of the stud has a 1/4"-20 male thread and the other side has a 5/8"-16 male thread.
Highlights
Use to Mount onto Round or Flat Objects
Rubberized Mouth for Enhanced Grip
Reversible 5/8" Stud with 1/4"-20 and 5/8"-16 Male Threads
Package Contents
(1x) Super Clamp
(1x) Double Ended Stud with Male 1/4" and 3/8" Threads
Outside Dimensions No
Inside Dimensions No
Product Weight (lb) 1.25 lb (0.6 kg)
Material Aluminum Alloy
Manufacturer Studio Assets
Studio-Assets Swivel Umbrella Adapter
$ 24.95
Swivel Umbrella Adapter
The Swivel Umbrella Adapter enables the angle of lights to be adjusted while using umbrellas. The adapter has a 5/8" receptor on each end to fit onto light stands and to attach lights. Included are two studs. One stud has 1/4"-20 and 3/8"-16 male threads, and the other with 1/4"-20 and 3/8"-16 female threads. These can be used to help attach lights to the adapter or mount the adapter onto a stand that does not have a 5/8" stud.
Highlights
› Bracket tilts and swivels for easy positioning
› Includes female and male studs
› Umbrella socket accepts shafts up to 8mm in diameter
› Ratcheting tilt handle
Package Contents
(1x) Swivel Umbrella Adapter
(1x) Double Ended 1/4" & 3/8" Female Short Stud
(1x) Double Ended 1/4" & 3/8" Male Short Stud
Outside Dimensions N/A
Inside Dimensions N/A
Product Weight (lb) 0.75 lb (0.3 kg)
Material Aluminum and Plastic
Manufacturer Studio Assets
