$ 99.95
$ 1,399.95 - Sold Out
The DS161 combines power with wide angle coverage to give you the most bang for your buck. This kit provides everything you need to add a strobe to any Ikelite TTL system for Compact Digital, Mirrorless, or DSLR camera.
The quality of light is exceptional due to a round flash tube and custom powder coated reflector designed specifically to deliver the softest, most even coverage possible. Strobes with a straight flashtube may be capable of high powers, but require the addition of a diffuser to spread out their sharp, rectangular beam pattern and reduce the harsh hot spot. The DS161 beam is designed to be perfectly soft and wide spread through its reflector design, and is capable of providing you the coverage and power you want and avoiding the one f/stop loss caused by adding a diffuser.
DS160 and DS161 strobes are legendary for their ability to keep up in rapid firing situations—a cut above any flash on the market. Electrical sync connection and a high-capacity battery pack provide the speed you need to capture fast moving subjects like sharks and sailfish at just the right millisecond.
When combined with a compatible TTL system, the DS161 automatically adjusts brightness to provide perfect exposure whether you're shooting macro, portrait or wide angle. Focus on your camera settings and composition and enjoy the increased number of flashes and even faster recycle time you'll get when working with a TTL system.
$ 79.95
Soften and widen the beam of your Ikelite DS161, DS160, or DS125 Substrobe with this Dome Diffuser. It reduces backscatter, glare, and hard shadows for better overall image quality, while providing a greater angle of coverage to allow you to illuminate more of that coral reef or shipwreck on the sea floor. The dome shape spreads light wider than a traditional flat shape, enabling you to cover more ground. Additionally, the diffuser has a high transmission rate to reduce light loss and preserves the normal color temperature of your strobe. The dome is easily attached to the front of the DS161, DS160, or DS125 by way of secure press-fit method. A lanyard ring and lanyard are included.
$ 160.00
Y-shaped sync cord with Ikelite-style plugs on all ends. Supports TTL operation with any compatible system featuring an Ikelite-style electrical bulkhead and two DS strobes. The Ikelite-style plug is widely recognized as the most reliable waterproof strobe sync connection available. Built-in strain reliefs reduce stress on cord ends.
This cord is a direct replacement for the prior version # 4103.52. The Ikelite plugs now feature hard anodized aluminum fittings. Overall the cord is significantly lighter while maintaining the same durability as the original nickel plated brass product.
Compatible with all Ikelite housings featuring an electrical bulkhead, Ikelite TTL Converters, and select housings from other manufacturers that have been upgraded with an Ikelite electrical bulkhead.
To connect two strobes to a single housing bulkhead, use a single sync cord # 45151 instead.
Sync Cord
(3) Connector Protector Ikelite end # 0301.12
Silicone Lubricant 1cc 1cc tube
$ 549.95
$ 174.95
Looking for something different? Tired of night diving? Fluorescence will give you a whole new perspective on the world beneath the waves. With our line of excitation and barrier filters, you can convert your powerful Ikelite DS161, DS160, or DS125 strobe into a fluorescence set-up. No need to purchase expensive specialty lights or guided dives. Be the explorer!
$ 999.95 - Sold Out
$ 279.95
200' / 60 m depth rating
Controls for all camera functions
Near neutral buoyancy in fresh water
12-24 thread tray mounting with 3" (76mm) spacing
1.2 lb (522 g)
6.2 x 4.6 x 3.7" (16 x 11.7 x 9.4 cm)
3.0" diameter glass lens port with 67mm thread
$ 149.95 - Sold Out
$ 849.95 - Sold Out
$ 9.95
$ 9.95
$ 9.95
$ 124.95
The Fiber Optic Adapter converts the electrical bulkhead of any Ikelite DS Substrobe into a fiber optic port. This adapter is a manual exposure (non-TTL) trigger only. The strobe's output must be adjusted using the manual power settings built into the strobe (varies by model). The Fiber Optic Adapter automatically configures itself for compatibility with both pre-flash and non pre-flash camera modes. No setting of small switches or confusion over number of pre-flashes. Simply turn on your Substrobe and take one picture to configure. An individual Fiber Optic Adapter is needed for each Substrobe. Use of two Substrobes requires two Fiber Optic Adapters. Depth rated to 300 feet (90 meters). Requirements for Use 1. Any Ikelite DS Substrobe: Compatible Substrobes include DS50, DS51, DS125, DS160 and DS161 models. The AF35 AutoFlash is not compatible with the #4401 adapter. 2. One of the following fiber optic cables (not available through Ikelite): INON Optical D Cable "Non-wireless type" L-Connector * SEA&SEA Fiber Optic Cable (L-type) Product No. 50107 Olympus UW Fiber Optic Cable PTCB-E02 Nauticam Optical Fiber Cable No. 26211 Nauticam to INON Nauticam Optical Fiber Cable No. 26212 Nauticam to SEA&SEA 3. Compatible camera and housing: Underwater housing must allow use of the camera's built-in flash and have a means by which to attach a fiber optic cable. Ike$ 639.95
Ikelite 2101 Vega 2105.1 Underwater Video Light featuring 2200 Lumens with Separate and 65 Deg / 100 Deg Beam. Uses Rechargeable Li-Ion / Full (2200), 1/2 (1000), 1/4 (500) battries