Saramonic TX-XLR9 Plug-on XLR Transmitter for UwMIC9 Digital UHF Wireless Microphone System
$ 149.00 - Sold Out
Saramonic TX-XLR9 Plug-on XLR Transmitter for UwMIC9 Digital UHF Wireless Microphone System
MFR SKU: UWMIC9TXXLR9 | Helix SKU: SRUWMIC9TXXLR9
Overview
The Saramonic TX-XLR9 is a wireless UHF plug-on transmitter that makes any kind of XLR microphone wireless and provides stellar, broadcast-quality sound. You can easily attach a handheld interview microphone (such as the Saramonic SR-HM7), or any other kind of XLR microphone and use it wirelessly. The TX-XLR9 can also provide +48V phantom power, allowing you to use any kind of condenser microphone wirelessly, such as the Saramonic SR-TM1 shotgun microphone. It’s ideal for use with DSLRs, video cameras or portable audio recorders for capturing interviews, film dialog, field recording, broadcast TV, news gathering, vlogging, YouTube videos and more. It features sturdy metal construction and delivers excellent sound quality at an affordable price. The TX-XLR9 is ultra-compact, lightweight, and easy to bring with you on every shoot.
The TX-XLR9 is designed to be used with the Saramonic UwMic9 RX9 dual-channel wireless camera-mountable receiver (sold separately). The RX9 enables you to have two on-camera subjects with their own wireless microphones by adding either a TX9 beltpack transmitter and clip-on lavalier microphone, an HU9 Handheld Microphone, or an additional TX-XLR9 transmitter and a handheld XLR microphone.
The TX-XLR9 is built tough with sturdy metal construction, features a locking XLR connector to hold the attached microphone firmly in place, and it syncs with the RX9 receiver wirelessly through easy-to-use infrared sensors. The easy-to-read backlit LCD display lets you make quick adjustments to the intuitive menus in the brightest or darkest environments. The TX-XLR9 can be muted with the press of a button, and a flashing red LED reminds you that it’s muted. The buttons can be “locked” when in use to prevent accidental muting or powering off.
The TX-XLR9 transmitter also features a selectable RF power output. The “Low” setting lets you extend battery life in situations where the subject is close to the receiver. Medium and High are useful when the subject is going to be further away, or when you’re using the TX-XLR9 in an environment with more potential interference. The TX-XLR9 is a high-quality piece of equipment with professional features, excellent sound quality, and an unbeatable budget-friendly price.
- Broadcast-quality UHF wireless plug-on transmitter for the dual-channel RX9 receiver (sold separately)
- Makes any microphone wireless and provides +48v phantom power to condenser microphones
- Works right out of the box with easy plug-and-play operation
- Durable metal construction with Easy-to-read backlit LCD display, easy-to-use menus and controls and locking XLR connector that keeps the connected microphone firmly attached
- Offers up to 330-foot (100m) operating distance with infrared that makes it easy to sync channels with receiver
Channels: 96 selectable channels in 2 groups (A and B)
Wireless Frequency Range: 514 MHz - 596 MHz
Oscillator Type: PLL synthesizer
Input: Locking XLR Connector
Phantom Power: Selectable +48V Phantom Power (On/Off)
Reference audio input level: –60 dBV (MIC input, 0 dB attenuation)
Antenna: 1/4 λwire antenna
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60 dBV, 1 kHz input)
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Batteries: 2 LR6/AA size batteries
Dimensions: 4.15 x 1.69 x 1.37” (105.5 x 43 x 34.7mm)
Weight: 4.87 oz (138g) (without batteries)
In The Box:
1 x TX-XLR9 plug-on transmitter
1 x SR-UMBC1 battery compartment
1 x Printed user manual
1 x Warranty card
Optional Accessories (Sold Separately):
- SR-HM7 Cardioid Dynamic Handheld Interview Microphone
- SR-TM1 Cardioid 11” Cardioid Shotgun Microphone
- SR-TM7 Super-Cardioid 15” Cardioid Shotgun Microphone
- SR-NV5 Cardioid 6.5” Shotgun Microphone
- XLavMic-O Omnidirectional Lavalier with XLR Connector
- XLavMic-C Cardioid Lavalier with XLR Connector
- SR-UMBC1 Replacement Battery Compartment
- SR-RX9 UwMic9 Dual-Channel Camera-Mountable Receiver
SARAMONIC UWMIC15 16-CHANNEL UHF WIRELESS LAVALIER MICROPHONE SYSTEM WITH PORTABLE CAMERA-MOUNTABLE WIRELESS RECEIVER
$ 149.00 - Sold Out
SARAMONIC UWMIC15 16-CHANNEL UHF WIRELESS LAVALIER MICROPHONE SYSTEM WITH PORTABLE CAMERA-MOUNTABLE WIRELESS RECEIVER
MFR SKU: UWMIC15 | Helix SKU: SRUWMIC15
Overview
The Saramonic UwMic15 is a portable, camera-mountable wireless microphone system that utilizes the UHF (Ultra High Frequency) spectrum and provides stellar, broadcast-quality sound in a package that’s substantially more affordable than other UHF wireless systems. The included RX15 receiver and TX15 beltpack transmitter are both compact and lightweight, and the SR-M1 clip-on lavalier microphone sounds excellent and is visually discreet when clipped to collars and clothing. The UwMic15 system is perfect for DSLRs, mirrorless cameras, video cameras or portable audio recorders for capturing interviews, film dialog, field recording, broadcast TV, news gathering, vlogging, YouTube and more.
It works right out of the box and is remarkably easy to use. You just connect the microphone, turn on the power and go. The RX15 receiver features a headphone output, enabling real-time audio monitoring if your camera lacks a headphone jack. The UHF spectrum helps you avoid interference, and the 555-579 MHz range is not impacted by the FCC’s ban of the 600 MHz frequencies. Easy-to-read backlit LCD displays let you make quick adjustments to the intuitive menus in the brightest or darkest environments. There are 16 channels available, which allows you to run multiple sets of UwMic15 systems at the same time. If you ever have an issue with interference and need to change channels, built-in infrared makes synchronizing easy.
The power button on the TX15 beltpack transmitter can easily be set to “locked” to prevent it from accidentally being turned off when in use. If the person wearing the microphone needs privacy, a quick push of a button turns on a muting feature, and a flashing red LED reminds you to unmute it afterward. The system offers an impressive operating range of up to 330-feet (100m).
This kit includes both 1/8“ (3.5mm) and XLR output cables so you can use the UwMic15 with DSLRs, mirrorless cameras, cinema cameras, camcorders, professional video cameras, audio recorders, mixers and more. The UwMic15 system is also expandable. Optional transmitters and output cables (sold separately) are available, giving you unrivaled flexibility. They make it possible to use a wireless handheld microphone with the SR-HM15 or a wireless XLR plug-on transmitter with the SR-XLR15, and to connect the included RX15 receiver to smartphones, tablets, computers, GoPro cameras and more.
- Broadcast-quality UHF wireless lavalier microphone system with camera-mountable portable receiver, UHF frequency spectrum helps you avoid interference
- Headphone monitor output enables you to always listen to your sound, even if your camera lacks a headphone jack
- Easy-to-use with plug-and-play operation, easy-to-read backlit LCD displays on both units, included microphone and output cables feature locking connectors to prevent unplugging
- Wireless infrared synchronization makes it easy to sync channels between the RX15 receiver and TX15 transmitter, 16 selectable channels for running multiple systems
- Up to 330-ft (100m) operating distance, mute button function with red flashing LED to remind you it’s muted
Specifications:
Channels: 16
Oscillator Type: PLL synthesizer
Output: 1/8“ (3.5mm) mini jack
Antenna: 1/4 λ wire antenna
Audio Output Level: -60 dBV
Headphone Output Level: 30mW (16 ohm)
Frequency Range: 555 - 579 MHz
Sensitivity: -95 dBm
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Power: 2 x AA batteries
Dimensions: 7.1 x 2.5 x 0.9” (180 x 64 x 23 mm)
Weight: 2.58oz (73g) without batteries
TX15 Transmitter Specifications:
Channels:16
Oscillator Type: PLL synthesizer
Carrier Frequencies:555 - 579 MHz
Reference Deviation: +/- 5 kHz
Signal to Noise Ratio: 70 dB or more
Spur Suppression: -60 dB
Voice Delay: 12 ms
Antenna: 1/4 λ wire antenna
Audio Input Connector: 1/8“ (3.5mm) mini jack
Reference Audio Input Level: -60 dBV
Distortion: 0.5% or less
Power: 2 x AA batteries
Dimensions:7.1 x 2.5 x 0.9” (180 x 64 x 23 mm)
Weight: 2.4oz (68g) without batteries0
In The Box:
1 x RX15 portable UHF receiver
1 x TX15 UHF transmitter
1 x SR-M1 omnidirectional lavalier microphone
1 x alligator-style lavalier mic clip
1 x camera shoe mount with an integrated 1/4 20 tripod thread
1 x short coiled locking mini-plug output cable with gold-plated connectors
1 x short locking gold-plated mini-plug to XLR male output cable
2 x removable belt clips
2 x SR-UMBC1 battery compartments
1 x printed manual
1 x warranty card
Optional Accessories (Sold Separately):
- SR-XLR15 Plug-on UHF transmitter with +48V phantom power for XLR microphones
- SR-HM15 Wireless UHF handheld vocal microphone
- LC-C35 Output Cable: Locking 1/8” (3.5mm) to Lightning cable for iPhone & iPad
- UTC-C35 Output Cable: Locking 1/8” (3.5mm) to USB Type-C cable for smartphone or tablets
- SR-PMC1 Output Cable: Locking 1/8” (3.5mm) to TRRS cable for Smartphone or Tablets
- USB-CP30 Output Cable: Locking 1/8” (3.5mm) to USB cable PC or Mac computers
- SR-GMC1 Output Cable: Locking 1/8” (3.5mm) to select GoPro cameras
- LM-WS Fur Windjammer for SR-M1 Lavalier 3-Pack
- SR-LMWS3 Replacement Foam Windscreens 3-Pack
- WM4C-MC1 Replacement Mic Clip
- SR-XM1 Swiveling Omnidirectional Condenser Microphone
- SR-UMBC1 Replacement Battery Compartment
- SR-UM10-MC2 Replacement Belt Clip
- SR-UM10-MC1 Replacement Shoe-Mount Adapter
- SR-UM10-C35XLR Replacement Locking type 1/8” (3.5mm) to XLR Male Output Cable
- SR-UM10-C35 Replacement Locking type 1/8” (3.5mm) to 1/8” (3.5mm) Output Cable
- SR-UM10-M1 Replacement SR-M1 Lavalier
- SR-UC-201 3.5mm Female TRS Microphone Adapter Cable to 3.5mm Male TRRS for smartphone or tablets
- SR-25C35 3.5mm to 2.5mm Microphone Output Cable for SSE with Fuji Cameras
- SR-TX15 Replacement UHF beltpack transmitter
SARAMONIC UWMIC9 HU9 WIRELESS UHF HANDHELD CARDIOID MICROPHONE TRANSMITTER FOR UWMIC9 RX9 RECEIVER
$ 149.00 - Sold Out
SARAMONIC UWMIC9 HU9 WIRELESS UHF HANDHELD CARDIOID MICROPHONE TRANSMITTER FOR UWMIC9 RX9 RECEIVER
MFR SKU: UWMIC9-HU9 | Helix SKU: SRUWMIC9HU9
Overview
The Saramonic HU9 is a handheld microphone with a built-in UHF wireless transmitter and integrated antenna that provides rich, broadcast-quality sound in a durable yet sleek metal body. It’s perfect for use with DSLRs, video cameras or portable audio recorders for capturing interviews, film dialog, field recording, broadcast TV, news gathering, vlogging, YouTube videos and more. The HU9 features sturdy metal construction and delivers excellent sound quality at an affordable price. It’s compact, lightweight, and easy to bring with you on every shoot.
The HU9 is designed to be used with the Saramonic UwMic9 RX9 dual-channel wireless camera-mountable receiver (sold separately). The RX9 enables you to have two on-camera subjects with their own wireless microphones by adding either a TX9 beltpack transmitter and clip-on lavalier microphone, a TX-XLR9 plug-on transmitter and a handheld XLR microphone, or a second HU9 handheld microphone.
The exterior of the HU9 has only one button which makes operating it extremely easy. The combo mute/power button can be locked with a switch hidden inside the body to prevent the person holding the mic from accidentally muting, changing the channel or turning it off. An easy-to-read backlit LCD display clearly shows the remaining battery life, mute status, and the group and its operating channel. A protective ring around the perimeter of the grill prevents the HU9 from rolling when resting on flat surfaces.
The HU9 transmitter also features a selectable RF power output. The “Low” setting lets you extend battery life in situations where the subject is close to the receiver. Medium and High are useful when the subject is going to be further away, or when you’re using the HU9 in an environment with more potential interference. The HU9 is a high-quality piece of equipment with professional features, excellent sound quality, and an unbeatable budget-friendly price.
- Broadcast-quality UHF wireless handheld microphone transmitter for the dual-channel RX9 receiver (sold separately)
- Cardioid pickup pattern rejects unwanted sounds from the sides and rear
- Rugged all-metal construction that has a has a professional, sleek look with easy-to-read backlit LCD display, easy-to-use menus and a single-button control
- Switchable Low or High RF power output for increased battery life or range
- Offers up to 330-foot (100m) operating distance with infrared that makes it easy to sync channels with receiver
Specifications:
Wireless Frequency Range: 514 MHz - 596 MHz
Oscillator Type: PLL synthesizer
Polar Pattern: Cardioid
Reference audio input level: –60 dBV (MIC input, 0 dB attenuation)
Antenna: 1/4 λwire antenna
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60 dBV, 1 kHz input)
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Batteries: 2 LR6/AA size batteries
Dimensions: 10 x 2.05 x 2.05” (254 x 52 x 52 mm)
Weight: 11.93oz (338.2g) (without batteries)
In The Box:
1 x HU9 handheld microphone
1 x Printed user manual
1 x Warranty card
Optional Accessories (Sold Separately):
- SR-HM7-WS2 Foam Windscreen for SR-HM7 (2-pack)
- SR-RX9 UwMic9 Dual-Channel Camera-Mountable Receiver
Saramonic Uwmic9 Rx-XLR9 Compact Plug-On Dual-Channel Uhf Wireless Receiver
$ 199.99 - Sold Out
Saramonic Uwmic9 Rx-XLR9 Compact Plug-On Dual-Channel Uhf Wireless Receiver
MFR SKU: UWMIC9RX-XLR9 | Helix SKU: SRUWMIC9RXXLR9
Overview
The Saramonic UwMic9 RX-XLR9 is an ultra-portable, ultra-compact dual-channel UHF wireless microphone receiver that can mount directly to an XLR input of a professional video camera, mixer or an audio recorder. With the included accessories it can also easily be mounted to the shoe of a DSLR, Mirrorless or Video Camera and plugged into a 1/8“ (3.5mm) mic input. Its dual-channel ability allows you to use wireless microphones on two separate people with only a single RX-XLR9 (transmitters sold separately). Very easy to use, the RX-XLR9 features durable metal construction, and provides pristine, broadcast-quality sound for interviews, film dialog, field recording, TV and news gathering.
Unlike other Plug-In wireless receivers that require expensive proprietary batteries, the RX-XLR9 runs on 2 standard AA’s, and can be powered with an external USB battery pack (sold separately). A headphone output is built-in, so you can always monitor your sound, even when your camera lacks a headphone jack. An easy-to-read backlit LCD display lets you make quick adjustments to its intuitive menus in the brightest or darkest environments. The RX-XLR9 can be rotated 320° to make room for other equipment when mounted to a camera. The UwMic9 RX-XLR9 is ideal for use with professional video cameras, DSLRs, mirrorless cameras, mixers and portable audio recorders.
The RX-XLR9 utilizes the UHF (Ultra High Frequency) spectrum, which helps you avoid interference, and its 514-596 MHz range in 96 selectable channels is not impacted by the FCC’s ban of the 600 MHz frequencies. An automatic-scan feature locates the best available channel for you and the infrared synchronization makes the process a snap.
A variety of excellent wireless transmitters are available to use with your RX-XLR9, and because it works with two of them at the same time, you can mix and match to suit your needs. Choose from the TX9 beltpack transmitter (which includes an SR-M1 omnidirectional lavalier microphone), the TX-XLR9 Plug-In transmitter, and the HU9 handheld wireless microphone.
- Two channel wireless UHF receiver built into a single, ultra-compact and ultra-portable body that works with two transmitters at the same time and provides pristine, broadcast-quality sound
- Mounts directly to an XLR input on professional video cameras, mixers or recorders and provides reliable broadcast-quality sound, features durable metal construction
- Includes hardware to mount to DSLR, Mirrorless and Video Cameras and plug into 1/8“ (3.5mm) mic inputs, rotates 320° to make room for other equipment
- Built-in headphone output so you monitor your sound, even when your camera lacks a headphone jack, easy-to-read backlit LCD display
- Offers up to 330-ft (100m) operating distance, not impacted by the FCC’s ban of the 600 MHz frequencies
Specifications:
Channels: 96 selectable channels in 2 groups (A and B)
Wireless Frequency Range: 514 MHz - 596 MHz
Oscillator Type: PLL synthesizer
Receiver Output Connector: 3-Pin XLR Male
Output Cable: 1/8” (3.5mm) TRS Output Cable
Antenna: 1/4 λwire antenna
Audio Output Level: -60 dBV
Headphone Output Level: 30mW (16 ohm)
Receiver Sensitivity: -95 dBm
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60 dBV, 1 kHz input)
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Reference Audio Input Level: -60dBV (MIC Input, 0dB Attenuation)
Batteries: 2 LR6/AA size batteries
Dimensions: 4.4 x 2.48 x 1.02” (112 x 63 x 26mm)
Weight: 3.39 oz (96g) (without batteries)
HU9 Transmitter
Channels: 96 selectable channels in 2 groups (A and B)
Wireless Frequency Range: 514 MHz - 596 MHz
Oscillator Type: PLL synthesizer
Polar Pattern: Cardioid
Reference audio input level: –60 dBV (MIC input, 0 dB attenuation)
Antenna: 1/4 λwire antenna
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60 dBV, 1 kHz input)
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Batteries: 2 LR6/AA size batteries
Dimensions: 10 x 2.05 x 2.05” (254 x 52 x 52 mm)
Weight: 11.93 oz (338.2g) (without batteries)
In The Box:
1 x Plug-on dual-channel wireless receiver
1 x Camera shoe mount with an integrated metal 1/4 20 tripod thread
1 x 13-inch (33cm) XLR female to gold-plated 1/8“ (3.5) TRS male cable
1 x 4-ft (1.2m) gold-plated USB-C to USB-A cable
1 x Printed user manual
1 x Warranty card
Optional Accessories (Sold Separately):
- TX9 Belt-pack Transmitter with Lavalier
- TX-XLR9 Transmitter: XLR Plug-on Transmitter with +48V phantom power
- HU9 Transmitter: Wireless Handheld Microphone
- SR-UC-201 3.5mm Female TRS Microphone Adapter Cable to 3.5mm Male TRRS for smartphone or tablets
- SR-25C35 3.5mm to 2.5mm Microphone Output Cable for SSE with Fuji Cameras
Saramonic UwMic9 RX9+TX9 UHF Wireless Lavalier Microphone System with Portable Dual-Channel Camera-Mountable Receiver
$ 269.00
Saramonic UwMic9 RX9+TX9 UHF Wireless Lavalier Microphone System with Portable Dual-Channel Camera-Mountable Receiver
MFR SKU: UWMIC9TX9RX9 | Helix SKU: SRUWMIC9TX9RX9
Overview
The Saramonic UwMic9 RX9+TX9 is a portable, camera-mountable UHF lavalier wireless system that provides stellar, broadcast-quality sound and offers powerful features that greatly exceed the capabilities of wireless systems that cost over twice as much. The included dual-channel RX9 receiver gives you the ability to run two separate wireless microphones by adding an additional transmitter (sold separately). This system is perfect for DSLRs, video cameras or portable audio recorders for capturing interviews, film dialog, field recording, broadcast TV, news gathering, vlogging, YouTube videos and more. Both components feature sturdy metal construction and deliver excellent sound quality in a low-cost package. This kit is ultra-compact, lightweight, and easy to bring with you on every shoot.
The UwMic9 is remarkably easy to use. It works right out of the box. You just plug in the mic, turn on the power and go. It utilizes the UHF (Ultra High Frequency) spectrum, which helps you avoid interference, and its 514-596 MHz range is not impacted by the FCC’s ban of the 600 MHz frequencies. An automatic-scan feature locates the best available channel for you if needed and the infrared synchronization makes the process a snap. Easy-to-read backlit LCD displays let you make quick adjustments to the intuitive menus in the brightest or darkest environments. The RX9 receiver also includes a headphone output, enabling real-time audio monitoring if your camera lacks a headphone output.
The compact, dual-channel RX9 receiver features two separate wireless receivers. This gives you the ability to run two separate wireless microphones anytime, by just adding an additional optional transmitter. Locking 1/8” (3.5mm) mini-plug and XLR output cables are both included so you can use the UwMic9 with DSLRs, mirrorless cameras, cinema cameras, camcorders, professional video cameras, audio recorders and more. This flexible system can also be used to transmit line-level audio, such as an output from a mixer. This can be useful at weddings and other events where you need to wirelessly record crystal-clear audio from a soundboard.
Another great benefit is that your UwMic9 system is expandable. Optional transmitters and output cables (sold separately) are available, giving you unrivaled flexibility. Easily add an additional beltpack transmitter and lavalier microphone, or two wireless handheld microphones, or use wireless plug-on transmitters. You can also connect the included RX9 receiver to smartphones, tablets, computers, GoPro cameras and more with optional output cables. The UwMic9 RX9+TX9 is a high-quality system with professional features, excellent sound quality, and an unbeatable budget-friendly price.
- Broadcast-quality UHF wireless lavalier microphone system with a dual-channel camera-mountable portable receiver you can easily expand by adding a second transmitter
- Easy-to-use and works right out of the box with plug-and-play operation
- Built-in headphone output so you can always hear your sound — even when your camera lacks a headphone jack
- Durable all-metal construction with easy-to-read backlit LCD displays
- Offers up to 330-foot (100m) operating distance with auto-scan feature finds the best channels for you and infrared makes it easy to sync channels
Specifications:
RX9 Receiver
Channels: 96 selectable channels in 2 groups (A and B)
Wireless Frequency Range: 514 MHz - 596 MHz
Oscillator Type: PLL synthesizer
Output: Locking 1/8” (3.5mm) TRS mini-jack
Antenna: 1/4 λwire antenna
Audio Output Level: -60 dBV
Headphone Output Level: 30mW (16 ohm)
Sensitivity: -95 dBm
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60 dBV, 1 kHz input)
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Batteries: 2 LR6/AA size batteries
Dimensions: 6.73 x 2.5 x 1.18” (170.9 x 63.5 x 30.0mm)
Weight: 7.72 oz (218.7g) (without batteries)
TX9 Transmitter
Channels: 96 selectable channels in 2 groups (A and B)
Wireless Frequency Range: 514 MHz - 596 MHz
Oscillator Type: PLL synthesizer
Input: Locking 1/8” (3.5mm) TRS mini-jack
Reference audio input level: –60 dBV (MIC input, 0 dB attenuation)
Antenna: 1/4 λwire antenna
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60 dBV, 1 kHz input)
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Batteries: 2 LR6/AA size batteries
Dimensions: 6.73 x 2.5 x 1.18” (170.9 x 63.5 x 30.0mm)
Weight: 7.46 oz (211.4g) (without batteries)
Saramonic UwMic9 RX9+TX9+TX9 2-Person Wireless Lavalier Microphone System with Portable Dual-Channel Camera-Mountable Receiver
$ 399.00 - Sold Out
Saramonic UwMic9 RX9+TX9+TX9 2-Person Wireless Lavalier Microphone System with Portable Dual-Channel Camera-Mountable Receiver
MFR SKU: UWMIC9TX9TX9RX9 | Helix SKU: SRUWMIC9TX9TX9RX9
Overview
The Saramonic UwMic9 RX9+TX9+TX9 is a portable, dual-channel, camera-mountable UHF wireless system that provides stellar, broadcast-quality sound and enables you to use clip-on lavalier mics on two separate people while only requiring you to attach a single ultra-compact receiver to your camera. This system is perfect for DSLRs, video cameras or portable audio recorders for capturing interviews, film dialog, field recording, broadcast TV, news gathering, vlogging, YouTube videos and more. Every component features sturdy metal construction and delivers excellent sound quality in a low-cost package. The entire kit is ultra-compact, lightweight, and easy to bring with you on every shoot.
The UwMic9 is remarkably easy to use. It works right out of the box. You just plug in the mics, turn on the power and go. It utilizes the UHF (Ultra High Frequency) spectrum, which helps you avoid interference, and its 514-596 MHz range is not impacted by the FCC’s ban of the 600 MHz frequencies. An automatic-scan feature locates the best available channel for you and the infrared synchronization makes the process a snap. There are 96 channels available, which enables you to run multiple sets of UwMic9 systems at the same time without issues. Easy-to-read backlit LCD displays on both of the transmitters and the receiver let you make quick adjustments to the intuitive menus in the brightest or darkest environments. The RX9 receiver also includes a headphone output, enabling real-time audio monitoring if your camera lacks a headphone output.
Locking 1/8” (3.5mm) mini-plug and XLR output cables are both included so you can use the UwMic9 with DSLRs, mirrorless cameras, cinema cameras, camcorders, professional video cameras, audio recorders and more. This flexible system can also be used to transmit line-level audio, such as an output from a mixer. This can be useful at weddings and other events where you need to wirelessly record crystal-clear audio from a soundboard in addition to running a wireless mic.
The power button on the TX9 beltpack transmitter can easily be set to “locked” to prevent it from accidentally being turned off when in use. If the person wearing the clip-on lavalier microphone needs privacy, a quick push of a button turns on a muting feature, and a flashing red LED reminds you to unmute it afterward. The system offers an impressive operating range of up to 330-feet (100m).
Another great benefit is that the UwMic9 system is expandable. Optional transmitters and output cables (sold separately) are available, giving you unrivaled flexibility. They make it possible to add a wireless handheld microphone or a wireless plug-on transmitter, and to connect the included RX9 receiver to smartphones, tablets, computers, GoPro cameras and more. The UwMic9 RX9+TX9+TX9 is a high-quality system with professional features, excellent sound quality, and an unbeatable budget-friendly price.
- Complete two-person UHF wireless lavalier microphone kit with a single, dual-channel camera-mountable receiver that provides reliable broadcast-quality sound
- Easy-to-use and works right out of the box with plug-and-play operation
- Built-in headphone output so you can always hear your sound — even when your camera lacks a headphone jack
- Durable all-metal construction with easy-to-read backlit LCD displays
- Offers up to 330-foot (100m) operating distance with auto-scan feature finds the best channels for you and infrared makes it easy to sync channels
Specifications:
RX9 Receiver
Channels: 96 selectable channels in 2 groups (A and B)
Wireless Frequency Range: 514 MHz - 596 MHz
Oscillator Type: PLL synthesizer
Output: Locking 1/8” (3.5mm) TRS mini-jack
Antenna: 1/4 λwire antenna
Audio Output Level: -60 dBV
Headphone Output Level: 30mW (16 ohm)
Sensitivity: -95 dBm
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60 dBV, 1 kHz input)
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Batteries: 2 LR6/AA size batteries
Dimensions: 6.73 x 2.5 x 1.18” (170.9 x 63.5 x 30.0mm)
Weight: 7.72 oz (218.7g) (without batteries)
TX9 Transmitters
Channels: 96 selectable channels in 2 groups (A and B)
Wireless Frequency Range: 514 MHz - 596 MHz
Oscillator Type: PLL synthesizer
Input: Locking 1/8” (3.5mm) TRS mini-jack
Reference audio input level: –60 dBV (MIC input, 0 dB attenuation)
Antenna: 1/4 λwire antenna
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60 dBV, 1 kHz input)
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Batteries: 2 LR6/AA size batteries
Dimensions: 6.73 x 2.5 x 1.18” (170.9 x 63.5 x 30.0mm)
Weight: 7.46 oz (211.4g) (without batteries)
Saramonic UwMic9 TX9+RX-XLR9 UHF Wireless Lavalier Mic System with Dual-Channel XLR Plug-In Receiver for Professional Video, DSLR & Mirrorless Cameras
$ 329.00 - Sold Out
Saramonic UwMic9 TX9+RX-XLR9 UHF Wireless Lavalier Mic System with Dual-Channel XLR Plug-In Receiver for Professional Video, DSLR & Mirrorless Cameras
MFR SKU: UWMIC9TX9RXXLR9 | Helix SKU: SRUWMIC9TX9RXXLR9
Overview
The Saramonic UwMic9 TX9+RX-XLR9 is an ultra-portable, dual-channel, camera-mountable wireless UHF lavalier system that has powerful features which greatly exceed the capabilities of wireless systems that cost over twice as much. It allows you to use wireless microphones on two separate people (when you add an additional transmitter, which is sold separately). If you ever need more than one wireless microphone in the future, you can easily and affordably expand this system. This system is easy to use, features durable metal construction, and provides pristine, broadcast-quality sound for interviews, film dialog, field recording, TV and news gathering.
The included RX-XLR9 dual-channel receiver can mount directly to an XLR input of a professional video camera, mixer or an audio recorder, and it can also easily be mounted to a DSLR, Mirrorless or Video Camera and plugged into a 1/8“ (3.5mm) mic input with the included accessories. Unlike other Plug-In wireless receivers that require expensive proprietary batteries, the RX-XLR9 runs on 2 standard AA’s, and can be powered with an external USB battery pack (sold separately). It can also be rotated 320° to make room for other equipment when mounted to a camera. The included TX9 beltpack transmitter and SR-M1 omnidirectional lavalier microphone are also premium quality components.
The UwMic9 utilizes the UHF (Ultra High Frequency) spectrum, which helps you avoid interference, and its 514-596 MHz range is not impacted by the FCC’s ban of the 600 MHz frequencies. An automatic-scan feature locates the best available channel for you and the infrared synchronization makes the process a snap. Easy-to-read backlit LCD displays let you make quick adjustments to the intuitive menus in the brightest or darkest environments. Plus, the RX-XLR9 receiver includes a headphone output, enabling real-time audio monitoring if your camera lacks a headphone output.
A variety of excellent wireless transmitters are available to expand your system, and because it works with two of them at the same time, you can mix and match to suit your needs. Choose from an additional TX9 beltpack transmitter (which includes an SR-M1 lavalier microphone), the TX-XLR9 Plug-In transmitter, and the HU9 handheld wireless microphone.
- All metal constructed wireless beltpack lavalier transmitter with an ultra-compact dual-channel plug-on camera receiver, both components feature durable metal construction
- Easy to use and provides reliable, pristine broadcast-quality sound, can easily be expanded by adding another separately sold wireless transmitter
- Receiver mounts directly to an XLR input and includes a shoe-mount with 1/8“ (3.5mm) output cable for DSLR, Mirrorless and Video Cameras, rotates 320° to make room for other equipment
- Built-in headphone output so you monitor your sound, even when your camera lacks a headphone jack, easy-to-read backlit LCD display
- Offers up to 330-ft (100m) operating distance, not impacted by the FCC’s ban of the 600 MHz frequencies
Specifications:
RX-XLR9 Receiver
Channels: 96 selectable channels in 2 groups (A and B)
Wireless Frequency Range: 514 MHz - 596 MHz
Oscillator Type: PLL synthesizer
Receiver Output Connector: 3-Pin XLR Male
Output Cable: 1/8” (3.5mm) TRS Output Cable
Antenna: 1/4 λwire antenna
Audio Output Level: -60 dBV
Headphone Output Level: 30mW (16 ohm)
Receiver Sensitivity: -95 dBm
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60 dBV, 1 kHz input)
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Reference Audio Input Level: -60dBV (MIC Input, 0dB Attenuation)
Batteries: 2 LR6/AA size batteries
Dimensions: 4.4 x 2.48 x 1.02” (112 x 63 x 26mm)
Weight: 3.39 oz (96g) (without batteries)
TX9 Transmitter
Channels: 96 selectable channels in 2 groups (A and B)
Wireless Frequency Range: 514 MHz - 596 MHz
Oscillator Type: PLL synthesizer
Input: Locking 1/8” (3.5mm) TRS mini-jack
Reference audio input level: –60 dBV (MIC input, 0 dB attenuation)
Antenna: 1/4 λwire antenna
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60 dBV, 1 kHz input)
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Batteries: 2 LR6/AA size batteries
Dimensions: 6.73 x 2.5 x 1.18” (170.9 x 63.5 x 30.0mm)
Weight: 7.46 oz (211.4g) (without batteries)
Saramonic UwMic9 TX9+TX9+RX-XLR9 Dual-Channel UHF Wireless Lavalier Mic System with Plug-In XLR Receiver for Professional Video, DSLR & Mirrorless Cameras
$ 459.00 - Sold Out
Saramonic UwMic9 TX9+TX9+RX-XLR9 Dual-Channel UHF Wireless Lavalier Mic System with Plug-In XLR Receiver for Professional Video, DSLR & Mirrorless Cameras
MFR SKU: UWMIC9TX92RXLR9 | Helix SKU: SRUWMIC9TX92RXLR9
Overview
The Saramonic UwMic9 TX9+TX9+RX-XLR9 is an ultra-portable, dual-channel, camera-mountable UHF wireless system that enables you to use clip-on lavalier mics on two separate people while only requiring you to attach a single ultra-compact receiver to your camera. The included RX-XLR9 receiver can mount directly to an XLR input of a professional video camera, mixer or an audio recorder, and it can also easily be mounted to a DSLR, Mirrorless or Video Camera and plugged into a 1/8” (3.5mm) mic input with the included accessories. This system is easy to use, features durable metal construction, and provides pristine, broadcast-quality sound for interviews, film dialog, field recording, TV and news gathering.
The UwMic9 utilizes the UHF (Ultra High Frequency) spectrum, which helps you avoid interference, and its 514-596 MHz range in 96 selectable channels is not impacted by the FCC’s ban of the 600 MHz frequencies. An automatic-scan feature locates the best available channel for you and the infrared synchronization makes the process a snap. Easy-to-read backlit LCD displays let you make quick adjustments to the intuitive menus in the brightest or darkest environments. Plus, the RX-XLR9 receiver includes a headphone output, enabling real-time audio monitoring if your camera lacks a headphone jack.
Unlike other Plug-In wireless receivers that require expensive proprietary batteries, the RX-XLR9 runs on 2 standard AA’s, and can be powered with an external USB battery pack (sold separately). It can be rotated 320° to make room for other equipment when mounted to a camera. The UwMic9 TX9+TX9+RX-XLR9 is ideal for use with professional video cameras, DSLRs, mirrorless cameras, mixers and portable audio recorders.
- 2 wireless UHF beltpack lavalier transmitters with an ultra-compact dual-channel plug-on camera receiver, all components feature durable metal construction
- Easy to use and provides reliable, pristine broadcast-quality sound, put clip-on lav mics on two people with only a single ultra-portable receiver to your camera
- Receiver mounts directly to an XLR input and includes a shoe-mount with 1/8“ (3.5mm) output cable for DSLR, Mirrorless and Video Cameras, rotates 320° to make room for other equipment
- Built-in headphone output so you can monitor your sound, even when your camera lacks a headphone jack, easy-to-read backlit LCD display
- Offers up to 330-ft (100m) operating distance, not impacted by the FCC’s ban of the 600 MHz frequencies
Specifications:
RX-XLR9 Receiver
Channels: 96 selectable channels in 2 groups (A and B)
Wireless Frequency Range: 514 MHz - 596 MHz
Oscillator Type: PLL synthesizer
Receiver Output Connector: 3-Pin XLR Male
Output Cable: 1/8” (3.5mm) TRS Output Cable
Antenna: 1/4 λwire antenna
Audio Output Level: -60 dBV
Headphone Output Level: 30mW (16 ohm)
Receiver Sensitivity: -95 dBm
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60 dBV, 1 kHz input)
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Reference Audio Input Level: -60dBV (MIC Input, 0dB Attenuation)
Batteries: 2 LR6/AA size batteries
Dimensions: 4.4 x 2.48 x 1.02” (112 x 63 x 26mm)
Weight: 3.39 oz (96g) (without batteries)
TX9 Transmitters
Channels: 96 selectable channels in 2 groups (A and B)
Wireless Frequency Range: 514 MHz - 596 MHz
Oscillator Type: PLL synthesizer
Input: Locking 1/8” (3.5mm) TRS mini-jack
Reference audio input level: –60 dBV (MIC input, 0 dB attenuation)
Antenna: 1/4 λwire antenna
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60 dBV, 1 kHz input)
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Batteries: 2 LR6/AA size batteries
Dimensions: 6.73 x 2.5 x 1.18” (170.9 x 63.5 x 30.0mm)
Weight: 7.46 oz (211.4g) (without batteries)
Saramonic Vmic Mini Shotgun Microphone
$ 59.00 - Sold Out
Saramonic Vmic Mini Shotgun Microphone
MFR SKU: VMICMINI| Helix SKU: SRVMICMINI
Overview
The Saramonic Vmic Mini is an extremely compact and lightweight mini-shotgun microphone that mounts directly to DSLR, mirrorless, and video cameras and enables you to easily capture broadcast-quality sound. It can also be connected to smartphones and tablets with an included cable and dramatically improves the sound quality of your mobile productions.
The all metal construction and precision cut body of this microphone is a work of art. The size makes it ideal for use with small format DSLR, Mirrorless and video cameras as well as smaller mobile devices. Its ultra-compact size allows the mic to be placed in areas that larger shogun mics just won’t fit.
Using the Vmic Mini is incredibly simple. You just plug it in and you’re done. There are no batteries to install or charge, and there are no buttons or switches to operate. It’s truly plug-and-play. A great choice for anyone creating video content on a budget but looking for high-quality gear. Vmic Mini is a lightweight and ultraportable shotgun microphone that will give all of your videos excellent sound.
A stand out feature of the Vmic Mini design is the unique microphone shockmount. The wiry shockmounts on some competing microphones are flimsy and prone to bending, this can cause some unwanted audio issues and change the way the microphone picks up sound. The integrated shockmount of Vmic Mini is robust and features a sleek, sweeping and stable design.
An advanced uniquely designed bullet like windscreen is included, giving the Vmic Mini its unique and interesting look. It features a sturdy gasket which aids in blocking wind noise, helps to protect the microphone from things like weather and dust, and keeps it securely fastened in place while on the go.
Every aspect of the Vmic Mini’s design is top notch, and the built-in locking camera shoe features a metal 1/4 20 tripod thread at the base that gives you near limitless mounting options. Two output cables are included: one that connects to cameras, and another that connects to the headphone jack of smartphones and tablets. Whether you’re shooting with a powerful DSLR, mirrorless, video cam, tablet or a smartphone, the Vmic Mini is a compact and ultraportable shotgun microphone that will give all of your videos excellent sound.
- Provides clear, broadcast-quality sound to DSLR, Mirrorless and Video Cameras or Smartphones and Tablets
- Easy-to-use with plug-and-play operation and no batteries required for operation
- Sleek camera-mountable design that is lightweight and compact, yet features durable metal construction
- Includes two output cables: one for cameras, one for mobile devices
- Mounts to camera shoes, camera cages, boom poles, tripods, stands and more
Specifications:
Type: 14mm Condenser Microphone
Polar Pattern: Cardioid (Uni-Directional)
Frequency Range: 75Hz - 20kHz
Sensitivity: -35 ±3dB (0dB = 1V/Pa, @ 1kHz)
Maximum Input SPL: f=1kHz, THD<5% (105dB)
Output Impedance: 200ohm
Signal to Noise Ratio: 75dB SPL
Weight: 2.43oz (69g)
Dimensions: 4.61 x 0.75 x 2.44” (117 x 19 x 62mm)
In The Box:
1 x Mini shotgun microphone with integrated shockmount
1 x Fitted foam windscreen
1 x Short coiled 1/8“ (3.5 mm) TRS to 1/8“ (3.5 mm) TRS output cable with gold-plated right-angle connectors
1 x Short coiled 1/8“ (3.5 mm) TRS to 1/8“ (3.5 mm) TRRS output cable with gold-plated connector for mobile devices
1 x Information card
1 x Warranty card
Optional Accessories:
- SR-BSP1 Aluminum Smartphone Holder with Stabilizing Handle & Mounting Shoe
- LC-C35 Output Cable: Locking 1/8” (3.5mm) to Lightning cable for iPhone & iPad
- UTC-C35 Output Cable: Locking 1/8” (3.5mm) to USB Type-C cable for Smartphone or Tablets
- USB-CP30 Output Cable: Locking 1/8” (3.5mm) to USB cable PC or Mac computers
- SR-GMC2 Output Cable: 1/8” (3.5mm) to select GoPro cameras
- SR-CS350 Replacement 1/8” (3.5mm) Male Stereo TRS to 1/8” (3.5mm) Male Stereo TRS Output Cable
- SR-PMC2 Replacement Output Cable: 1/8” (3.5mm) to TTRS cable for Smartphone or Tablets
Saramonic VMIC Recorder Super-Cardioid Video Microphone with Built-in Audio Recorder
$ 159.00 - Sold Out
Saramonic VMIC Recorder Super-Cardioid Video Microphone with Built-in Audio Recorder
MFR SKU: VMIC-REC | Helix SKU: SRVMICREC
Overview
The Saramonic Vmic Recorder is a premium on-camera shotgun microphone with a built-in high-resolution audio recorder that delivers broadcast-quality sound to DSLRs, mirrorless cameras and video cameras and provides many useful features. Specifically designed for DSLR, Mirrorless and Video Cameras that lack a microphone input or users that want to record to an external recorder as well as their camera. There are two outputs on the Vmic Recorder, one for your camera and another for headphones — so you can always listen to your audio while recording or even when your camera lacks a headphone jack. The built-in audio recorder captures rich and detailed sound with resolutions up to 24bit 48kHz, and like all Saramonic products, the Vmic Recorder is incredibly easy to use.
A backlit LCD screen with an intuitive menu system is provided on the rear of the Vmic Recorder, and a push-button joystick lets you quickly do a range of functions like controlling the headphone volume, adjusting the recording level, and turning on the low-cut filter, which makes dialog more intelligible and eliminates distracting rumble sounds. The exterior of the Vmic Recorder is constructed with durable metal and was built to survive the not-so-gentle world of video production. The robust integrated shockmount features a camera shoe mount and a metal 1/4 20 tripod thread for more mounting options.
In addition to impressive sound quality, the Vmic Recorder also efficiently utilizes power. It gets 9 hours of operation time when recording, and 10 hours when used as a shotgun mic and it runs on 2 standard AA batteries. Audio is recorded onto a MicroSDHC card (sold separately), and it’s compatible with up to 32GB capacities. Plus, the Vmic Recorder can be used as an excellent-sounding on-camera shotgun microphone even when you’re not recording. A foam windscreen is included for indoor use, and for outdoor recording in higher winds you can use the fitted VMIC-WS furry windscreen (sold separately).
- Broadcast-quality on-camera shotgun microphone with an integrated high-resolution MicroSDHC audio recorder, built-in headphone jack and removable output cable
- Durable metal construction, robust integrated shockmount with camera shoe mount
- Incredibly easy to use, low-cut filter makes dialog more intelligible and eliminates distracting rumble sounds
- Backlit LCD screen with easy-to-use menu system, camera shoe features a metal 1/4 20 tripod thread, records up to 24-bit 48kHz resolution
- Can be used as an on-camera shotgun microphone even when you’re not recording, runs on 2 standard AA batteries and gets up to 10 hours of operation
Specifications:
Frequency Response:50 Hz to 20 kHz
Type of Microphone: Condenser (Unidirectional)
Polar Pattern: Supercardioid
Maximum SPL: 104 dB
Signal to Noise Ratio: 22 dB, Gain Setting 66 dB
Operating Temperature Range: -17 to 57 Celsius
Output Impedance: 47 Ohms or less
Headphone Output Impedance: 16 Ohms
Sensitivity: -40 dB at 1 kHz
Filter: High-pass 200 Hz
Recording Media: MicroSDHC card slot
Resolution: 16-bit/48kHz wav or 24-bit/48kHz wav
Outputs: 2 x female 1.8” (3.5 mm), 1 for headphones, 1 for camera connection
Battery: 2 x AA (Alkaline or Lithium)
Dimensions: 10.04 x 2.6 x 3.15” (255 x 66 x 80 mm)
Weight: 7.3 oz (207 g)
In The Box:
1 x Vmic Recorder shotgun microphone with built-in audio recorder
1 x short, coiled cable with gold-plated mini-plug connectors
1 x foam windscreen
1 x printed manual
1 x warranty card
Optional Accessories (Sold Separately):
- VMIC-WS Outdoor high-wind furry windscreen
- SR-UC-201 1/8“ (3.5mm) Female TRS microphone adapter cable to 3.5mm male TRRS for smartphones and tablets with a headphone jack
- WM4C-C35 Replacement 1/8“ (3.5mm) male stereo TRS to 3.5mm male stereo TRS output connector cable
- SR-CS350 2-Pack of replacement 1/8“ (3.5mm) male stereo TRS to 3.5mm male stereo TRS output connector cables
- SR-SM-C301 1/8“ (3.5mm) output cable for iOS
- SR-SM-C302 1/8“ (3.5mm) output cable for Android
- LC-C35 Locking 1/8“ (3.5mm) to Lightning output cable for iPhone & iPad
- UTC-C35 Locking 1/8“ (3.5mm) to USB Type-C output cable for smartphones, tablets and Apple computers with USB Type-C
- SR-PMC2 1/8“ (3.5mm) TRS to 1/8“ (3.5mm) TRRS output cable for smartphones and tablets
- SR-GMC2 1/8“ (3.5mm) TRS to select GoPro camera output cable
- USB-C201 Locking 1/8“ (3.5mm) TRS to USB output cable for PC and Mac computers
Saramonic VMIC Super-Cardioid Shotgun Condenser Video Microphone for DSLR Cameras - Black
$ 119.00
Saramonic VMIC Super-Cardioid Shotgun Condenser Video Microphone for DSLR Cameras - Black
MFR SKU: VMIC | Helix SKU: SRVMIC
Overview
The Saramonic Vmic is a premium on-camera shotgun microphone that delivers broadcast-quality sound to DSLRs, mirrorless cameras, video cameras and audio recorders and provides a versatile array of features at an affordable price. It has a durable metal construction that will handily survive the demanding world of video production. An impressively robust integrated shockmount isolates the Vmic from unwanted vibration noise. In contrast, the shockmounts on competing shotguns are often flimsy and prone to bending and damage.
Another feature you won’t find on competing shotgun microphones is the built-in headphone output on the Vmic, which always enables you to hear your sound, even when your camera lacks a headphone jack. All of the controls on the Vmic are easy to use and easy to access. It has a +20dB boost setting that lets you to turn down your camera’s noisy preamp in order to achieve an ultra-clean sound as well as letting you pick up subjects from further away. The -10dB setting lowers the sensitivity of the Vmic so you can cleanly capture audio in loud environments. A low-cut switch makes dialog more intelligible and eliminates unwanted deep bass sounds, like distracting vibration noises from footsteps. A high-frequency boost setting enhances the sharpness and clarity of the sounds you capture.
A short, coiled output cable is included to connect to your camera or recorder. This cable is easily removable which allows you to use any 1/8“ (3.5mm) cable in its place. When you need more length than the included 8-inch cable provides, you can easily swap it out for a longer one. A foam windscreen is included for indoor use, and for outdoor recording in higher winds you can use the VMIC-WS fitted furry windscreen that was designed for the Vmic (sold separately). The Vmic is an excellent sounding shotgun microphone that outperforms competing products that are considerably more expensive and doesn’t have the compromises of microphones that are similarly priced.
- Broadcast-quality on-camera shotgun microphone with built-in headphone jack, removable output cable, durable metal construction, and robust integrated shockmount
- Incredibly easy to use with a versatile array of features, +20dB boost switch for achieving ultra-clean sound, -10dB switch for cleanly capturing loud sounds
- Low-cut setting makes dialog more intelligible and eliminates distracting rumble sounds, high-frequency boost setting enhances sharpness and clarity
- Integrated camera-shoe mount features a metal 1/4 20 tripod thread, shockmount is rugged and robust, not flimsy or prone to bending and damage
- Runs on 2 standard AA batteries with a battery door that’s easy to access and use
Specifications:
Type of Microphone: Condenser (Unidirectional)
Polar Pattern: Supercardioid
Signal to Noise Ratio: 75 dB or more
Output Impedance: 200 Ohms or less
Sensitivity: -40 dB at 1 kHz
Filter: High-pass 150 Hz
Outputs: 2 x female 1.8” (3.5 mm), 1 for headphones, 1 for camera connection
Battery: 2 x AA (Alkaline or Lithium)
Dimensions: 10.2 x 2.60" (259.08 x 66 mm)
Weight: 6.9 oz (196 g)
In The Box:
1 x shotgun microphone
1 x short, coiled cable with gold-plated mini-plug connectors
1 x foam windscreen
1 x printed manual
1 x warranty card
Optional Accessories (Sold Separately):
- VMIC-WS Outdoor high-wind furry windscreen
- SR-UC-201 1/8“ (3.5mm) Female TRS microphone adapter cable to 3.5mm male TRRS for smartphones and tablets with a headphone jack
- WM4C-C35 Replacement 1/8“ (3.5mm) male stereo TRS to 3.5mm male stereo TRS output connector cable
- SR-CS350 2-Pack of replacement 1/8“ (3.5mm) male stereo TRS to 3.5mm male stereo TRS output connector cables
- SR-SM-C301 1/8“ (3.5mm) output cable for iOS
- SR-SM-C302 1/8“ (3.5mm) output cable for Android
- LC-C35 Locking 1/8“ (3.5mm) to Lightning output cable for iPhone & iPad
- UTC-C35 Locking 1/8“ (3.5mm) to USB Type-C output cable for smartphones, tablets and Apple computers with USB Type-C
- SR-PMC2 1/8“ (3.5mm) TRS to 1/8“ (3.5mm) TRRS output cable for smartphones and tablets
- SR-GMC2 1/8“ (3.5mm) TRS to select GoPro camera output cable
- USB-C201 Locking 1/8“ (3.5mm) TRS to USB output cable for PC and Mac computers
Saramonic VmicLink5 HiFi RX5+TX5 5.8GHz Wireless Lavalier System with Portable 3-Channel Camera-Mountable Receiver
$ 299.00 - Sold Out
Saramonic VmicLink5 HiFi RX5+TX5 5.8GHz Wireless Lavalier System with Portable 3-Channel Camera-Mountable Receiver
MFR SKU: VMICLINK5HIFI | Helix SKU: SRVMICLINK5HIFI
Overview
The Saramonic VmicLink5 RX5 + TX5 is a portable camera-mountable UHF wireless microphone system that delivers premium, broadcast-quality sound — and it does most of the work for you. The system works flawlessly right out of the box. Just plug in the mics, turn on the power and go. Scanning to find the best channel and syncing the transmitter and receiver all happens automatically, so you get more time to concentrate on your shoot. If it detects potential interference, it automatically switches the frequencies for you. All of these features not only make the VmicLink5 HiFi simple to use but create the easiest possible workflow.
The VmicLink5 utilizes the 5.8GHz frequency range, which is much higher and less congested than 2.4GHz, UHF, and VHF. No other commercially available wireless systems work in the 5.8GHz range. Each unit gets 6 hours of power from included lithium-ion rechargeable batteries, so you won’t be wasting money on disposable batteries.
The included RX5 receiver weighs around half as much as most camera-mountable wireless receivers, so it won’t weigh you down. The receiver also features individual level controls for each transmitter and a headphone output enables real-time audio monitoring if your camera lacks a headphone output. Locking 1/8” (3.5mm) mini-plug and XLR output cables are both included so you can use the VmicLink5 with DSLRs, mirrorless, cinema, camcorders, recorders and professional video cameras.
The transmitters feature a locking 1/8” (3.5mm) microphone input and a dedicated line input that makes wirelessly capturing audio from an external source a snap. The TX transmitter also features a combination Power/Mute button which can be “locked” when in use to prevent accidental muting or powering off.
A custom molded carry case is also included, providing an easy way to transport the VmicLink5 or to provide even more protection when in a bag. Additionally, optional output cables (sold separately) are available, giving you unrivaled connectivity. They make it possible to connect the receiver to smartphones, tablets, computers, GoPro cameras and more.
- Incredibly easy-to-use with plug-and-play operation, headphone monitor output in case your camera lacks a headphone jack, up to 6 hours of power from included lithium-ion rechargeable batteries
- Perfect for DSLR, video cams and portable audio recorders for interviews, event videography, film dialog, field recording, broadcast TV and news gathering
- Operates in 5.8GHz frequency range which is less congested than 2.4GHz, UHF and VHF, detects interference and automatically switches channels
- Line-level audio inputs for getting audio from sound systems, smartphones, and more
- Up to 98.4-foot (29.99m) operating distance
Specifications:
RF Power: 15dBm(30mW)
RF Wireless Frequency Range: 5725MHz-5875MHz
Receiver Sensitivity: 198dB
Frequency Response: 40Hz-18KHz/ +/-1 dB
THD+N: 92dB
Sample Rate: 48K/16bit
Frequency Response: 40Hz-18KHz/ +/-1 dB
Voice delay: 18ms
Transmitter Mic in: Max 160mV/-13dBu, 1.8V phantom power
Transmitter Line in: Max 2V/8dBu, 50V DC isolation
Receiver Phone Out: Max 70mW/32Ohm, 10V DC isolation
Receiver Line Out: 4 times mic in gain, 50V DC isolation
Power consumption RX: 180mA/6V
Power consumption TX: 140mA/6V
Antenna gain: 3dBi
Batteries: 7.2V/1000mAh Li-ion (6.5 hours average)
Battery type: LP-E17(CANON EOS M3/750D/760D)
Dimensions RX and TX: 4.45 x 2.52 x 1.10” (113 x 64 x 28mm) each
Weight RX and TX: 5.96oz (169g) each (battery included)
Saramonic VmicLink5 RX+TX 5.8GHz Wireless Lavalier System with Portable Camera-Mountable Receiver
$ 299.00
Saramonic VmicLink5 RX+TX 5.8GHz Wireless Lavalier System with Portable Camera-Mountable Receiver
MFR SKU: VMICLINK5RX+TX | Helix SKU: SRVMICLINK5RXPTX
Overview
The Saramonic VmicLink5 RX+TX is a portable, camera-mountable wireless system that makes using a clip-on lavalier microphone as easy as possible. It’s perfect for DSLR, video cameras or portable audio recorders for capturing interviews, event videography, film dialog, field recording, broadcast TV and news gathering.
The Saramonic VmicLink5 RX+TX provides broadcast-quality sound in a low-cost package. The system works flawlessly right out of the box. Just plug in the mic, turn on the power and go. If it detects potential interference, it automatically switches the frequencies for you. All of these features not only make the VmicLink5 simple to use but create the easiest possible workflow.
The VmicLink5 utilizes the 5.8GHz frequency range, which is much higher and much less congested than 2.4GHz, UHF, and VHF. No other commercially available wireless systems work in the 5.8GHz range. The transmitter and receiver both get 6 hours of power from included lithium-ion rechargeable batteries, so you won’t be wasting money on disposable batteries.
The VmicLink5 features a single, lightweight RX receiver that mounts to your camera and handles the audio from the included transmitter. It features a level control for the transmitter and a headphone output enables real-time audio monitoring if your camera lacks a headphone jack. Locking 1/8” (3.5mm) mini-plug and XLR output cables are both included so you can use it with DSLRs, mirrorless, cinema, camcorders, recorders and professional video cameras.
The VmicLink5 includes a transmitter and an SR-M1 omnidirectional lavalier microphone. The transmitter features a locking 1/8” (3.5mm) microphone input and a dedicated line input that makes wirelessly capturing audio from an external source a snap. The TX transmitter also features a combination Power/Mute button which can be “locked” when in use to prevent accidental muting or powering off.
A carrying case is included, providing an easy way to transport the VmicLink5 or to provide even more protection when in a bag. Additionally, optional output cables (sold separately) are available, giving you unrivaled connectivity. They make it possible to connect the receiver to smartphones, tablets, computers, GoPro cameras and more. If you need to run two wireless transmitters to a single camera-mountable receiver, you need the VmicLink5 RX+TX+TX (sold separately). There is also an option to run three wireless mics with the VmicLink5 RX+TX+TX+TX (sold separately).
- A wireless beltpack lavalier transmitter with a lightweight camera-mountable receiver with XLR and 1/8“ (3.5mm) output cables and carrying case included
- Incredibly easy-to-use with plug-and-play operation, headphone monitor output in case your camera lacks a headphone jack, up to 6 hours of power from included lithium-ion rechargeable batteries
- Line-level audio input for getting audio from sound systems, smartphones, and more
- Operates in 5.8GHz frequency range which is less congested than 2.4GHz, UHF and VHF, detects interference and automatically switches channels, offers up to 98.4-foot (29.99m) operating distance
- Perfect for DSLR, video cams and portable audio recorders for interviews, event videography, film dialog, field recording, broadcast TV and news gathering
Specifications:
Channel Number: 1
RF Power: 15dBm(30mW)
RF Frequency Range: 5725MHz-5875MHz
Receiver Sensitivity: 198dB
Frequency Response: 40Hz-18KHz/ +/-1 dB
THD+N: 92dB
Sample Rate: 48K/16bit
Frequency Response: 40Hz-18KHz/ +/-1 dB
Voice delay: 18ms
Transmitter Mic in: Max 160mV/-13dBu, 1.8V phantom power
Transmitter Line in: Max 2V/8dBu, 50V DC isolation
Receiver Phone Out: Max 70mW/32Ohm, 10V DC isolation
Receiver Line Out: 4 times mic in gain, 50V DC isolation
Power consumption RX: 180mA/6V
Power consumption TX: 140mA/6V
Antenna gain: 3dBi
Batteries: 7.2V/1000mAh Li-ion (6.5 hours average)
Battery type: LP-E17(CANON EOS M3/750D/760D)
Dimensions RX and TX: 4.45 x 2.52 x 1.10” (113 x 64 x 28mm) each
Weight RX and TX: 5.96oz (169g) each (battery included)
Saramonic VWS Professional Windshield & Suspension System (Zeppelin/Blimp) for Shotgun & Pencil Microphones
$ 249.00 - Sold Out
Saramonic VWS Professional Windshield & Suspension System (Zeppelin/Blimp) for Shotgun & Pencil Microphones
MFR SKU: VWS | Helix SKU: SRVWS
Overview
The Saramonic VWS is a professional windshield and suspension system for shotgun and pencil microphones that gives you the ability to capture clean-sounding audio in extreme weather conditions. The advanced shock mount suspension system eliminates unwanted vibration and handling noise and performs excellently when used outdoors in high winds, or when used indoors for interior boom pole work, stand usage, or when used handheld with the pistol-grip handle. This is the ideal blimp solution for the Saramonic TM1, TM7, and NV5 shotgun microphones, but it can also perfectly accommodate almost every industry standard shotgun and pencil microphone, up to 14.9” (380mm) in length with a diameter of 0.75-0.91” (19-23mm).
The overall angle of the shock mount and blimp can quickly be adjusted to optimize the position of the microphone. A short, coiled XLR cable is built into the handle and shock mount unit to make it easy to connect microphones without concerning yourself with cable routing. The internal cabling also helps to create a seamless structure to diffuse rushing wind. An acoustically transparent furry windscreen acts as the external layer of the VMS, and it can easily be removed for use in milder environments. A 3/8“ thread at the base of the handle enables you to attach the VMS to boom poles, like the Saramonic Magic Boom Pole, and the 1/4” 20 thread adapter is also included to give you near limitless mounting options.
If your productions move rapidly from interior to exterior shots, the VMS can quickly be modified for those tasks. The rear and front domes of the are easily removable, and an integrated slide rail lets you quickly take off the main blimp housing. Likewise, the system is easy to break down and pack at the end of a shoot, and a carrying pouch is included for convenient storage and transport. All of the components are ultra-lightweight, so they won’t weigh you down when you’re working or moving your gear. The Saramonic VWS enables you to confidently achieve professional-level sound quality in adverse outdoor conditions with a wide variety of shotgun microphones at a remarkably budget-friendly price.
- High-wind protection for using shotgun and pencil microphones outdoors with premium suspension shock mount that eliminates vibration and handling noise when used indoors and out
- For use on boom poles and stands, integrated handle for handheld pistol-grip usage, internal coiled XLR cable for easy connection and seamless routing
- Microphone angle is easily adjustable for optimal positioning, you can also adjust the shock mount to accommodate almost every industry standard shotgun microphone
- Ultra-lightweight design, includes acoustically transparent furry exterior layer, carrying pouch, 1/4” 20 tripod thread adapter
- Gives you the ability to capture clean-sounding audio in extreme weather conditions as well as providing a superior shock mount system for both indoor and outdoor use
Specifications:
Internal Cable Connectors: 3-Pin XLR
Internal Spacing: 4.9 x 15.7” (125 x 400mm)
Microphone Compatibility Dimensions: 14.9” (380mm) long, 0.75-0.91” (19-23mm) diameter
Minimum Dimensions: 18.9 x 5.3 x 7.5” (480 x 134 x 190mm)
Maximum Dimensions: 18.9 x 5.3 x 12.4” (480 x 134 x 314mm)
Weight: 1.65lbs (750g)
Savage 10' Aluminum Air Cushioned
$ 64.00
Savage 10' Aluminum Air Cushioned
Savage 11x14 Black/White Smooth Creamcore, 100/Ctn
$ 152.99
Savage 11x14 Black/White Smooth Creamcore, 100/Ctn
Savage SKU: 15402 | Helix SKU: SG15402
Overview
Deep, rich black, acid-free mat board for photo mounting.
Savage 11x14 Black/White, 50 sheets/carton
$ 240.00
Savage 11x14 Black/White, 50 sheets/carton
Savage 11x14 Gray/White Smooth Creamcore, 100/Ctn
$ 250.00
Savage 11x14 Gray/White Smooth Creamcore, 100/Ctn
Savage 11x14 Pressure Sensitive, 25 sheets/carton
$ 180.00
Savage 11x14 Pressure Sensitive, 25 sheets/carton
Savage 11x14 White/Cream Smooth Creamcore, 100/Ctn
$ 117.99
Savage 11x14 White/Cream Smooth Creamcore, 100/Ctn
Savage SKU: 15012 | Helix SKU: SG15012
Overview
Brilliant white acid-free mat board for photo mounting.
Savage 11x14 White/White, 50 sheets/carton
$ 240.00
Savage 11x14 White/White, 50 sheets/carton
Savage 36" Black/Silver Umbrella
$ 15.00
Savage 36" Black/Silver Umbrella
Savage 36" Umbrella SoftBox Bounce
$ 37.00
Savage 36" Umbrella SoftBox Bounce
Savage 36" X 48" Rectangular 5-in-1
$ 55.00
Savage 36" X 48" Rectangular 5-in-1
Savage 40" X 60" Rectangular 5-in-1
$ 81.00
Savage 40" X 60" Rectangular 5-in-1
Savage 43" Black/Silver Umbrella
$ 20.00
Savage 43" Black/Silver Umbrella
Savage 43" Round 9-in-1 Kit with Stand
$ 182.50
Savage 43" Round 9-in-1 Kit with Stand
Savage 48" Silver/Black 48" Umbrella
$ 34.00
Savage 48" Silver/Black 48" Umbrella
Savage 700 Watt Bi-Color LED Umbrella 2-Light Kit
$ 199.99 - Sold Out
Savage 700 Watt Bi-Color LED Umbrella 2-Light Kit
Savage SKU: LED700K-BI | Helix SKU: SGLED700KBI
Overview
The Savage 700W Bi-Color LED Studio Light Kit features two energy efficient, dimmable and blendable bi-color LED chip bulbs. Each light generates the equivalent of 350W incandescent light and provides 20,000 hours of lamp life. Color temperature can be adjusted from 3200K to 5600K to match any available light source. Bulbs can be separately controlled with included remote up to 50 feet away. Blue gel domes are included for creative light effects.
Specifications
Blendable LED lighting to match any light source on set
Adjust from tungsten – daylight balanced light
3000 lumens at 1 meter at 5600K
2800 lumens at 1 meter at 4200K
2400 lumens at 1 meter at 3200K
CRI: 90
Each bulb generates equivalent of 350W incandescent light
Actual watts: 50
Low operating temperature
Dimmable bulbs
20,000 Hours of lamp life
Tri-band technology
High-grade output
Remote control included
Detachable blue gel domes included for creative lighting effects
85% Energy savings
E26 base (will also work in an E27 socket)
Voltage: 100 – 230V
Continuous lighting (versus flash) is especially ideal for sensitive subjects like babies and pets
Item Includes
Kit Includes:
(2) 350 Watt color correctable & dimmable LED studio lights
(2) Umbrella sockets & 9ʼ power cords
(2) 33” Translucent umbrellas
(2) 6ʼ Light stands
(2) Detachable blue gel domes
(1) Remote control
(1) Padded carry bag
Savage 8x10 Black/White Smooth Creamcore, 200/Ctn
$ 164.99
Savage 8x10 Black/White Smooth Creamcore, 200/Ctn
Savage SKU: 15401 | Helix SKU: SG15401
Overview
Deep, rich black, acid-free mat board for photo mounting.
