$ 185.00 - Sold Out
Cactus SKU: CACRF60X | Helix SKU: CUCACRF60X
The Wireless Flash RF60X is a portable flash with a built-in wireless transceiver that supports X-TTL with Cactus V6 II / V6 IIs wireless flash transceiver, high-speed sync / FP mode,* AF-assist and an exclusive Cooling Mode.
Pair with Cactus HHS Tranceiver V6II or V6IIs for Sony MIS
Built-in wireless commander and slave
The Cactus RF60X is a 2.4GHz radio-based wireless portable flash with a built-in transceiver that runs on 16 channels. It operates in three modes, Local for on-camera operation, Master and Slave modes for off-camera. To act as a commander, set an RF60X to Master and it can trigger an unlimited number of RF60X set in Slave mode. The effective distance between the RF60X Master and RF60X Slave is up to 100m (328 feet).
Wireless TTL on 8 camera brands
With the latest firmware installed, RF60X can transform into a wireless TTL off-camera flash triggered by V6 II and V6 IIs running X-TTL firmware. What this means is that RF60X will give you automatic flash exposure shooting from compatible Canon, Fujifilm, Nikon, Olympus, Panasonic, Pentax, Sigma and Sony cameras.
Automatic wireless HSS support
When triggered by a Cactus V6 II / V6 IIs, the RF60X supports High-speed sync (HSS) / Focal Plane (FP) mode, typically found on a TTL flash. Controlled from the V6 II / V6 IIs transmitter, the user can select between Normal HSS, the typical longer pulsing flash with lower power outputs; or Power Sync, which gives you a boost in flash power.
Quick recharge time
After firing at full power the flash can recycle as quickly as 1.9 seconds.
Unlike most other portable flash in the market, the AF-assist Light on the RF60X can also function as an off-camera flash in Slave mode. The Cactus V6 II turns on the AF-assist Light automatically which will illuminate your subject and provide extra light to help the camera lens focus. This is especially useful as the flash is usually placed closer distances to the subject than the camera.
By intelligently regulating the recycle time the RF60X runs cool all the time. This industry exclusive feature allows the flash to sustain a steady performance even after consecutive full power flashes. You can now shoot without the restriction of an overheat cut-off.
Remote control of power and zoom levels
The power levels of the RF60X set in Slave mode can be adjusted from 1/128 to 1/1 full power in steps of 0.3EV. Zoom level can also be controlled from a wide 24mm zoom to 105mm. With remote power and zoom control, you can place the RF60X units in hard-to-reach places and control its power and zoom level wirelessly.
Group control of up to four groups with configurable Group Alias
In a typical lighting setup, the ability to adjust, activate and deactivate groups of lights is vital in creating the desired lighting effect. The RF60X can be configured into four distinct groups. Power output can be adjusted in individual group or in all groups at the same time for fast adjustments. To streamline the shooting experience, user can rename each group to: KEY, FILL, SPOT, RIM, HAIR, LEFT, RIGHT, BACK and FRONT.
Optical Slave with delay feature
The RF60X has a built-in optical sensor. The optical sensor captures pre-flash signals that are being emitted earlier than the flash sync. By setting the pre-flash optical trigger and the delay timer, you can set the exact time for the flash to start firing. This allows the RF60X to do not only first-curtain and second-curtain sync (also referred as front and rear curtain), but to fire at any given point of the image.
In Multi mode, a rapid series of flashes is fired to capture multiple images of a moving subject in a single frame. This feature is available in all three flash modes so its users can create the desired effects with both on and off camera flash.
Compatible with other Cactus devices
Flash power and zoom level on RF60X Slave units can be controlled by an RF60X Master, RF60 Master, as well as Cactus V6, V6 II, and V6 IIs Flash Transceiver. Cactus V5 also supports basic flash triggering on the RF60X but does not support power and zoom level control on the RF60X. The RF60X in Master mode cannot trigger portable flashes mounted on V6 II or V6 IIs in Receiver (RX) mode; Cactus V6 II and V6 IIs can only be triggered by a V6 II and V6 IIs respectively.
Notes on compatibility:
|Battery Type||Primary LR6 Alkaline 1.5V||Rechargeable HR6 Ni-MH 1.2V|
at Full Power
at Full Power
Pentax SKU: 21357 | Helix SKU: PX21357
This standard zoom lens has been developed as a compact, easy-to-use everyday lens that meets user demand for a downsized, high-resolution digital SLR imaging system. Thanks to its retractable mechanism — employed for the first time in the PENTAX K-mount lens system — it provides the world’s shortest length in the stored position: just 41 millimeters. * Despite its ultra-compact design that assures outstanding portability, it also features the PENTAX-original HD Coating, Anomalous Dispersion Glass elements and aspherical elements to effectively compensate various aberrations for sharp, high-contrast, well-balanced images.
Note: In the case of use with the models below, when the lens is retracted, the display indicating lens retraction is not shown and photographs can be taken. For the K-3 and K-S1, a firmware upgrade is necessary.
K-500/K-50/K-5II/K-5IIs/K-30/K-01/K-5/K-r/K-7/k-x/K-m/K20D/K200D/K10D FW Ver.1.30/K100D Super
Note: With K-7、K-x、K-r、K-5Ⅱ、K-5、K-5IIs, MF will not work during Movie mode. When you use Movie mode, turn on the camera with Still mode and switch to Movie mode.
The world’s shortest standard zoom lensThis standard zoom lens offers a zoom ratio of approximately 2.8 times to cover the wide-angle to standard ranges (for focal lengths equivalent to 27.5mm to 76.5mm in the 35mm format), which are the most frequently used ranges in general photographic applications. Thanks to its new retractable mechanism, it measures a mere 41millimeters in length in the stored position — the world’s shortest for a standard zoom lens — to assure outstanding portability in combination with today’s downsized digital SLR camera body.Dependable weather-resistant constructionThis lens features a dependable weather-resistant construction with nine special seals to effectively prevent the intrusion of water into the interior. By pairing it with a weather-resistant PENTAX digital SLR camera body, the user is assured of a durable, reliable digital imaging system that performs superbly in demanding shooting settings — even in the rain or mist, or at locations prone to water splashes or spray.Exceptional image rendition to accommodate latest digital SLR camerasIncorporating Anomalous Dispersion Glass elements and aspherical elements in its 11-element/eight-group optics, this lens effectively compensates various aberrations for high-contrast, high-resolution, fine-detailed images with minimal color bleeding.HD* Coating to improve image descriptionThis lens is treated with the high-grade, multi-layer HD Coating.* Compared with conventional multi-layer coatings, this PENTAX-original coating assures less reflection and higher light transmittance to deliver bright, high-contrast images free of flare and ghost images, even under demanding lighting conditions such as backlight.
* HD stands for High Definition
Quick-Shift Focus SystemThis lens is equipped with the PENTAX-developed Quick-Shift Focus System, which allows the user to instantly switch to manual-focus operation, even when the camera’s AF system is in operation.Other features・SP (Super Protect) Coating applied to the front surface of the lens to effectively repel water and grease
・Smooth, quiet autofocus operation, driven by the built-in DC motor
・Rounded diaphragm to produce a smooth, beautiful bokeh (defocused) effect, while minimizing the streaking effect of point light sources
・Low-profile lens hood (included),designed for easy carrying without the need to remove it from the lens for storage
|Focal length (Equivalent to 35mm format)||18-50mm(27.5-76.5mm)|
|Angle of View||76-31.5°|
|Lens Construction||11 elements in 8 groups|
|No. of diaphragm blades||7
Rounded aperture (18mm: F4-5.6 50mm: F5.6-8)
|Closest focusing distance||0.3m|
|Maximum reproduction ratio||0.23x|
|Diameter x length||Approx.71mm x 41mm (2.8 in. x1.6 in.)|
Approx.158g /5.6 oz. (with hood Approx.165g /5.8 oz.)
ProMaster SKU: 4330 | Helix SKU: PR4330
ProMaster Body Caps keep dust and dirt out of your camera body when you are storing it with the lens removed.
Promaster Replacement Lithium Ion Battery 3.7 Volts 1800mAH Replaces Fuji NP-120, Pentax D-LI7
ProMaster SKU: 4323 | Helix SKU: PR4323
ProMaster Rear Lens Caps protect the rear element of you lens from dust, smudges and scratches when your lens is not mounted on your camera.
ProMaster SKU: 5439 | Helix SKU: PR5439
ProMaster offers a complete line of wired remote shutter release cables to cover almost every popular DSLR and film SLR. The innovative modular design allows the maximum flexibility in working distances. Many cameras offer built-in infrared remote capability but limit the use of your remote to standing in front of the camera. A wired remote cable allows more freedom to work from any position. The ProMaster Wired Remote Shutter Release Cable is fully compatible with all shutter release functions including prefocus and timed exposure.
Fully compatible with all shutter release functions including pre-focus and timed exposure Modular construction allows maximum flexibility in working distance Includes camera connector cable and extension for up to 6' working distance
- Fully compatible with all shutter release functions including prefocus and timed exposure
- Modular construction allows maximum flexibility in working distance
- Includes camera connector cable and extension for up to 6’ working distance
- This remote uses a 2.5mm sub-mini connector to the camera. It is compatible with cameras using the following remotes: Canon RS-60, Pentax CS-205, Olympus RM-CB2, and Sigma CR-21
CA Residents: Prop 65 WARNING(S)