Ikelite Silicone Lubricant 4 - 1cc Tubes
$ 6.49
Ikelite Silicone Lubricant 4 - 1cc Tubes - 5020
Silicone lubricant compatible with all Ikelite o-rings. Tear-off tubes cannot be resealed, so we recommend keeping in a plastic zip-top bag for travel. This lubricant is thick enough that it typically will not run out of the tube unless squeezed.
Ikelite Right-Hand Quick Release Handle with Extension
$ 64.95
Ikelite Right-Hand Quick Release Handle with Extension - IK407702
Ikelite Flex Mount for Quick Release Handle
$ 24.95 - Sold Out
Ikelite Flex Mount for Quick Release Handle - IK957331
Mounts to the Ikelite Quick Release Handle for attachment of 3/4 in flex arms.
Ikelite DL 20mm Port Extension
$ 199.95
Ikelite DL 20mm Port Extension - IK75020
Ikelite FL Extension for Lenses Up To 5.1 Inches
$ 199.95
Ikelite FL Extension for Lenses Up To 5.1 Inches - 551028
Ikelite ULTRAcompact Housing f/Panasonic TS5/TS6/FT5/FT6
$ 259.95 - Sold Out
Ikelite ULTRAcompact Housing f/Panasonic TS5/TS6/FT5/FT6
Ikelite SKU: 6270.06 | Helix SKU: IK627006
Overview
Features
Dive into underwater photography with this compact and easy to use system. Durable clear polycarbonate construction provides a unique view of the camera to ensure correct waterproof installation and confidence underwater. The camera installs with drop-in loading for quick and easy set up. Simply close the side latch and see the o-ring form a solid black, watertight seal. Large, ergonomic controls provide access to all important camera functions.
The nature of this camera's lens prevents the effective use of external wide angle lenses.
Ikelite products are designed, built and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit, function and waterproof integrity. We back our products with over 50 years of experience and service within the dive industry.
Flash
An included flash diffuser improves lighting quality when the camera's built-in flash is used. A built-in flash is effective between 1-3 feet (0.3-0.9m) from the subject in clear conditions. For best results a color correcting filter or external lighting is recommended. External lighting is more powerful and can be placed in a position to virtually eliminate the backscatter - or "snow" - from your underwater images.
Two fiber optic ports are provided for the connection of up to two Ikelite-, SEA&SEA-, or Olympus-type fiber optic cords.
Compatibility
The Panasonic LUMIX TS6 and FT6 cameras may also be used in the previous model housing built for the Panasonic LUMIX TS5 and FT5 cameras, item # 6270.05. However, very minor vignetting (dark shadows in the corners of the images) will be present. The lens port of this housing has been modified to be free of vignetting with both older and newer camera models.
Specifications
200 ft (60m) depth rating
Controls for all camera functions
Near neutral buoyancy in fresh water
12-24 thread tray mounting with 3" (76mm) spacing
1 lb (450 g)
5.9 x 4.7 x 3.0-inch (15 x 11.9 x 7.6 cm)
2.2" diameter glass lens port
In the Box
Housing
O-ring # 0132.45
Port cover # 0200.02
Lanyard # 0321.10
Silicone lubricant # 0184.1
1 year limited warranty
Ikelite Vacuum Kit for 3/8 Inch Control Gland
$ 184.95
Ikelite Vacuum Kit for 3/8 Inch Control Gland
Ikelite SKU: 47013 | Helix SKU: 47013
Overview
This valve is appropriate for older clear housings which do not feature a spare accessory port. Simply remove any control with a knob and replace it with this vacuum valve. Refer to the Vacuum System Compatibility Chart (below) for suggestions of where to install the valve.
We do not offer the addition of a spare accessory port.
Ikelite Vacuum Kit for 1/2 Inch Accessory Port and DSLR Top Mount
$ 194.95
Ikelite Vacuum Kit for 1/2 Inch Accessory Port and DSLR Top Mount
Ikelite SKU: 47012 | Helix SKU: 47012
Overview
Most newer housings with an opaque white front feature a spare 1/2-20 threaded accessory port. The plug of this spare port may be replaced with this vacuum valve.
Additionally, it can be installed in place of the 1/4-20 top mount featured on all DSLR housings produced since 2009.
Ikelite Vacuum Pump with Gauge
$ 59.95
Ikelite Vacuum Pump with Gauge
Ikelite SKU: 47011 | Helix SKU: 47011
Overview
Hand pump with gauge for vacuum valves.
Ikelite Vacuum Valve for 3/8 Inch Control Gland
$ 124.95
Ikelite Vacuum Valve for 3/8 Inch Control Gland
Ikelite SKU: 47003 | Helix SKU: 47003
Overview
This valve is appropriate for older clear housings which do not feature a spare accessory port. Simply remove any control with a knob and replace it with this vacuum valve. Refer to the Vacuum System Compatibility Chart (below) for suggestions of where to install.
We do not offer the addition of a spare accessory port.
Ikelite Battery Pack Cover for DS125, DS160, DS161
$ 15.00
Ikelite Battery Pack Cover for DS125, DS160, DS161
Ikelite SKU: 0591.4 | Helix SKU: 05914
Overview
The Battery Cover is designed to keep dirt and debris out of the battery pack charger socket and contact points when the battery pack is removed from the strobe front. This protective cap may be attached to the battery pack whenever storing or traveling with the battery pack separate from the strobe front.
The Battery Cover DOES NOT create a waterproof seal. Battery packs must be attached to a compatible strobe front to be waterproof.
Compatible with 4067 Li-Ion Battery Pack, 4066.5 NiMH Battery Pack, and 4066 Ni-Cad Battery Pack for DS125, DS160 and DS161 strobes. Battery Pack not included.
Ikelite O-Ring 0105 for FL System DSLR Lens Port
$ 12.95
Ikelite O-Ring 0105 for FL System DSLR Lens Port
Ikelite SKU: 0105 | Helix SKU: 0105
Overview
Replacement seal for DSLR Housings with the FL (Four Lock) port system. This o-ring fits between the housing and the lens port. Requires light lubrication with Ikelite silicone lubricant, sold separately.
Not for use between the Lens Extension and Modular 8-inch Dome or Flat Front. Not for use with housings featuring DL or DLM port systems.
Ikelite Tray Mount Kit for Gamma
$ 54.95
Ikelite Tray Mount Kit for Gamma - 18876
This kit has everything you'll need to use Gamma as a focus assist or macro video light. It's also super lightweight and flexible, so your Gamma can shine where it's needed most. 3/4 inch Flex Components act as a lightweight and comfortable handle for your compact system. Gamma flashlight not included.
GoPro not included and not available through Ikelite. Optional trays and lights sold separately.
Ikelite Dual AF35 Tray with T-Mount and Flex Ball
$ 59.95
Ikelite Dual AF35 Tray with T-Mount and Flex Ball - 952344
A dual tray designed to combine the AF35 strobe kit with a secondary lighting accessory.
Ikelite 1-inch Ball with Extended Sensor Mount Mark II for Quick Release Handle
$ 50.00
Ikelite 1-inch Ball with Extended Sensor Mount Mark II for Quick Release Handle - 40813
Mounts to our Quick Release Handle for attachment of 1-inch diameter ball arms from Ikelite, TLC, Ultralight, Nauticam, and others. Requires a compatible 1-inch Ball Clamp, sold separately. Extended length allows for the attachment of the EV Manual Controller.
Ikelite Flex Arm for DS51
$ 49.00 - Sold Out
Ikelite Flex Arm for DS51 - 408721
One of our most popular strobe arms pre-assembled and ready to be attached to your DS50 or DS51 strobe. A great start to any system, providing flexibility to shoot both wide angle and macro photography. Includes flex ball at release handle, flex ball at Micro Tray or DSLR top mount, 12 pieces of 3/4 flex arm extension and mount at DS50 or DS51 type strobe.
Ikelite Compact Ball Arm for Quick Release Handle
$ 179.00
Ikelite Compact Ball Arm for Quick Release Handle - 408005
Ikelite Modular Flat Front for FL Systems
$ 299.95 - Sold Out
Ikelite Modular Flat Front for FL Systems - 551035
Ikelite FL Flat Port For Lenses Up To 3.5 Inches
$ 149.95
Ikelite FL Flat Port For Lenses Up To 3.5 Inches - 5502
Flat ports are recommended for standard, macro and telephoto lenses. Due to refraction, flat ports reduce the angle of coverage of a lens and magnify the image. This makes the flat port ideal when using standard, macro or zoom lenses to shoot small subjects.
Note that if a port is long enough to accommodate the full length of a 1:1 macro lens, the lens may vignette when used at infinity. If access to the lens' full range is desired, then select a dome port instead.
Accommodates lenses up to 3.5-inch (8.9 cm) long and 3.3-inch (8.4 cm) in diameter. Measure your lens or use our Port Finder to determine compatibility.
Ikelite Non-TTL Dual Sync Cord for Sea & Sea/INON Strobes to Ikelite
$ 179.95
Ikelite Non-TTL Dual Sync Cord for Sea & Sea/INON Strobes to Ikelite - 41182
Y-shaped sync cord with an Ikelite-style plug on the housing end and SEA&SEA / INON-style plugs on the strobe ends. The Ikelite-style plug is widely recognized as the most reliable waterproof strobe sync connection available. Built-in strain reliefs reduce stress on cord ends.
SEA&SEA / INON strobes are unable to power the TTL circuitry in our housings. Thus, these strobes will operate in Manual exposure settings only. TTL communication through Ikelite housings is not supported by SEA&SEA / INON strobes.
This cord requires the attachment of two strobes for waterproof operation. To shoot with only one strobe, try a single sync cord instead.
Ikelite Underwater Housing for Panasonic Lumix G7
$ 974.95
Ikelite Underwater Housing for Panasonic Lumix G7 - 696107
A compact, full-featured waterproof housing for scuba diving, surf, pool, and creative photo opportunities anywhere there's water.
This housing requires the addition of a compatible lens port for waterproof operation. Lens port not included.
Ikelite Underwater Housing for Sony a6300
$ 974.95
Ikelite Underwater Housing for Sony a6300 - IK691063
A compact, full-featured waterproof housing for scuba diving, surf, pool, and creative photo opportunities anywhere there's water.
This housing requires the addition of a compatible lens port for waterproof operation. Lens port not included.
Ikelite 1.25in Ball Extension 9in Length
$ 60.00
Ikelite 1.25in Ball Extension 9in Length - 046809
A rigid anodized aluminum arm with balls at each end to extend your strobe arm. Requires compatible clamp at each end. Add an extension and clamp to your existing strobe arm for reduced backscatter and more creative lighting effects when shooting with a wide angle lens. 9 in (22 cm) extension with 1.25 in (3.2 cm) diameter balls at each end.
Ikelite 1-Inch Ball Arm Extension Mark II 7-Inch Length
$ 49.95
Ikelite 1-Inch Ball Arm Extension Mark II 7-Inch Length - 408107
A rigid anodized aluminum arm with balls at each end to extend your strobe or video light arm. Add an extension and clamp to your existing strobe arm for reduced backscatter and more creative lighting effects when shooting with a wide angle lens.
The slotted design allows for the attachment of a lightweight accessory in the middle of the extension. When used with our Sliding Ball Mount, the additional accessory is able to move up and down the length of the arm for quick repositioning during a dive.
Ikelite Underwater Housing for Nikon P7800
$ 749.95
Ikelite Underwater Housing for Nikon P7800 - 618278
Ikelite Product Number 6182.78
Dive into underwater photography with this compact yet sophisticated system!
Ikelite DL Compact 8 inch Dome Port
$ 395.00
Ikelite DL Compact 8 inch Dome Port - IK75344
Ikelite DL 8 Inch Dome Port
$ 495.00
Ikelite DL 8 Inch Dome Port - IK75340
Ikelite DS160 Strobe with NiMH Battery (USA)
$ 799.00
Ikelite DS160 Strobe with NiMH Battery (USA) - IK4060US
Ikelite Remote Optical Slave Converter for DS Strobes
$ 124.95
Ikelite Remote Optical Slave Converter for DS Strobes - 4403
For SEA&SEA or Nauticam housings with internal fiber-optic flash triggering devices, we recommend the Fiber Optic Converter, see below.
Ikelite Neoprene Cover for DSLR Flat Ports
$ 19.95
Ikelite Neoprene Cover for DSLR Flat Ports
Ikelite SKU: 0200.5 | Helix SKU: 02005
Overview
Neoprene cover with drawstring to fit DSLR Standard Flat Ports featuring a molded plastic front ring.
Ikelite DS161 Strobe Kit with Sync Cord + Arm / NiMH 4061.35
$ 1,399.95 - Sold Out
Ikelite DS161 Strobe Kit with Sync Cord + Arm / NiMH
The DS161 combines power with wide angle coverage to give you the most bang for your buck. This kit provides everything you need to add a strobe to any Ikelite TTL system for Compact Digital, Mirrorless, or DSLR camera.
The quality of light is exceptional due to a round flash tube and custom powder coated reflector designed specifically to deliver the softest, most even coverage possible. Strobes with a straight flashtube may be capable of high powers, but require the addition of a diffuser to spread out their sharp, rectangular beam pattern and reduce the harsh hot spot. The DS161 beam is designed to be perfectly soft and wide spread through its reflector design, and is capable of providing you the coverage and power you want and avoiding the one f/stop loss caused by adding a diffuser.
DS160 and DS161 strobes are legendary for their ability to keep up in rapid firing situations—a cut above any flash on the market. Electrical sync connection and a high-capacity battery pack provide the speed you need to capture fast moving subjects like sharks and sailfish at just the right millisecond.
When combined with a compatible TTL system, the DS161 automatically adjusts brightness to provide perfect exposure whether you're shooting macro, portrait or wide angle. Focus on your camera settings and composition and enjoy the increased number of flashes and even faster recycle time you'll get when working with a TTL system.
Ikelite DS-160 Strobe Front Only
$ 599.95
Ikelite DS-160 Strobe Front Only - 40602
Ikelite Base with Dual Handles for 6800-Series DSLR & Mirrorless Housings
$ 189.95
Ikelite Base with Dual Handles for 6800-Series DSLR & Mirrorless Housings - IK407768
Ikelite Universal Fiber Optic Mount Kit for Underwater Housings
$ 24.95
Ikelite Universal Fiber Optic Mount Kit for Underwater Housings - 4402
Provides an easy way to add fiber optic ports to almost any existing housing. Simply cut to size and adhere to the housing in front of the camera's built-in flash. Provides two ports for the attachment of one or two fiber optic cords. For best results, use in conjunction with your housing's flash deflector to avoid backscatter.
Ikelite Right-Hand Quick Release Handle for Steady Tray
$ 34.95
Ikelite Right-Hand Quick Release Handle for Steady Tray - 95314
The Ikelite Quick Release Handle allows for easy attachment and removal of arm components at the touch of a button for added convenience above and below water.
Durable aluminum and ABS construction with soft-touch rubber over-molding for a comfortable grip for large or small hands. Placement of release handle does not interfere with opening and closing the housing.
Compatible with Steady Tray for GoPro and Micro Trays. Left-hand and right-hand handles sold individually. Right-hand handle mounts on the right side when viewing the housing and tray from the back. Left and right handles are not interchangeable.
Ikelite Left-Hand Quick Release Handle for Steady Tray
$ 34.95
Ikelite Left-Hand Quick Release Handle for Steady Tray - 95313
The Ikelite Quick Release Handle allows for easy attachment and removal of arm components at the touch of a button for added convenience above and below water.
Durable aluminum and ABS construction with soft-touch rubber over-molding for a comfortable grip for large or small hands. Placement of release handle does not interfere with opening and closing the housing.
Compatible with Steady Tray for GoPro and Micro Trays. Left-hand and right-hand handles sold individually. Left-hand handle mounts on the left side when viewing the housing and tray from the back. Left and right handles are not interchangeable.
Ikelite FL Extension for Lenses Up To 4.125 Inches
$ 174.95
Ikelite FL Extension for Lenses Up To 4.125 Inches - 551022
Ikelite AF35 Optical TTL Strobe
$ 429.95 - Sold Out
Ikelite AF35 Optical TTL Strobe - 4035
The AF35's built-in sensor transmits data from the camera's flash to the AF35 strobe, varying the strobe's power automatically to replicate TTL exposure. The AF35 sensor is positioned to provide the most reliable strobe triggering possible without exposed cables which require maintenance and can tangle or break.
Ikelite 1-Inch Ball Mount Mark II for Quick Release Handle
$ 50.00
Ikelite 1-Inch Ball Mount Mark II for Quick Release Handle - 408131
Mounts to our Quick Release Handle for attachment of 1-inch diameter ball arms from Ikelite, TLC, Ultralight, Nauticam, and others. Requires a compatible 1-inch Ball Clamp, sold separately.
ikelite 200DL Underwater Housing for Fujifilm X-T4 Mirrorless Digital Camera
$ 1,695.00
ikelite 200DL Underwater Housing for Fujifilm X-T4 Mirrorless Digital Camera
ikelite SKU: 71504 | Helix SKU: IK71504
Overview
A full featured and durable waterproof housing for Fujifilm X-T4 mirrorless digital cameras. Suitable for scuba, snorkel, surf, pool, and any application in or around the water.
This housing requires the addition of a compatible DL Lens Port for waterproof operation. Lens Port not included.
This housing is only compatible with Fujifilm X-T4 cameras as shipped by the manufacturer. Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories.
Differences in lens and control placement prevent other Fujifilm camera models, including the XT-3, from being used in or adapted to this housing. We are not aware of any other models which may be used in or adapted to this particular housing.
Specifications:
200' (60m) depth rating
Compatible with DL system lens ports
Controls are provided for all important camera controls;
Controls are not provided for Fn2, Touch screen, Focus mode selector, Focus stick tilt, or Diopter adjustment knob; Front and rear dials may be rotated but not pressed
1/4-20 thread base mounts with 3.5" spacing
Slightly positive buoyancy in fresh water
Actual buoyancy varies depending on choice of lens and port
4.9 lb (2.22 kg)
9.2 x 7.375 x 6.75" (234 x 187 x 171 mm)
Vacuum valve included (pump sold separately)
Included Ikelite ICS-5 bulkhead connector with manual hotshoe for reliable electrical triggering of underwater strobes; Optional TTL accessories provides automatic exposure with compatible Ikelite DS strobes
ABS-PC construction is fundamentally corrosion-resistant
Made in the USA; Individually inspected for fit and water pressure tested to depth
2 year limited warranty
In the Box:
Housing
Rear O-ring # 0132.59 (installed)
Front O-ring # 0132.45 (installed)
Zoom Gear Retainer # 75900 (installed)
Port Hole Cover # 0200.92 (installed)
Waterproof Bulkhead Cap # 9104.7 (installed)
Base with Left-Hand Quick Release Handle # 4077.67 (installed)
Tool for Zoom Gear Retainer # 0945.06
.050" Hex Key # 0945.11
1/16" Hex Key # 0945.16
Silicone Lubricant 1cc Tube
Optional Accessories
Spare Rear O-Ring # 0132.59 Carry a back-up in case original seal becomes damaged.
Spare Front O-Ring # 0132.45 Carry a back-up in case original seal becomes damaged.
Vacuum Pump with Gauge # 47011 Pressurize the housing to check for leaks prior to entering the water.
Right-Hand Quick Release Handle # 4077.02 Makes a double tray for easier handling and a second attachment point for strobes or lights.
Trigger Extension # 4077.93 Recommended if using the Right-Hand Quick Release Handle. Brings shutter or AF-ON lever out to handle for more comfortable use (requires 2 to extend both controls).
DL4 DS Link TTL Converter # 46082 Fast, accurate, automatic TTL strobe exposure when used together with compatible Ikelite DS strobes.
Cable Top Handle Grip # 4080.07 The most convenient way to carry the system when shooting with two strobe arms.
Adding an external strobe or video light enhances your photos' color and sharpness underwater. If you will be shooting below 45 ft (13m) or in an indoor pool, your photos will be predominantly blue-green without an artificial light source. Read more about strobe options
Ikelite Underwater Housing and Sony RX100 Mark VI Camera Kit
$ 1,695.00
Ikelite Underwater Housing and Sony RX100 Mark VI Camera Kit
Sony's 2018 model in the huge RX100 series sports an extended, 24-200mm f/2.8-4.5 zoom lens with enhanced image stabilization. Having a longer zoom reach compared to previous RX100 models makes this a great choice for overall travel photography.
A large 20MP 1" sensor and incredibly fast autofocus make for great images above and below the surface... plus stunning 4K UHD video recording all in one very compact body.
This housing is designed for a robust, professional fit and feel without the professional price tag. Controls are provided for all camera functions and depth rated to 200' (60m). A spare accessory port on the side of the housing is removable for attachment of an optional vacuum testing kit. This housing is made in the USA.
Flash
Due to the position of the camera's flash in relation to its lens, the built-in flash is not suitable to illuminate photos under water. For the best color and clarity, we recommend adding a filter, strobe, or constant-on light. The built-in flash may be used to trigger external strobes via fiber optic sync cord. Two ports are provided for the connection of up to two fiber optic cords.
Any Ikelite DS strobe may be connected using the Fiber Optic Converter # 4401.3 and Fiber Optic Cord # 4501. The AF35 strobe is not compatible with this housing.
Fiber optic cord compatibility
-
Ikelite Fiber Optic Coiled Cord # 4501
-
INON Optical D Cable "Non-wireless type" L-Connector
-
SEA&SEA Fiber Optic Cable (L-type) # 50107
-
SEA&SEA Fiber Optic Cable II # 50128
-
Olympus UW Fiber Optic Cable PTCB-E02
-
Nauticam Optical Fiber Cable # 26211 Nauticam to INON
-
Nauticam Optical Fiber Cable # 26212 Nauticam to Sea&Sea
In the Box:
Underwater Housing # 6116.
Sony Cyber-shot DSC-RX100 VI Digital Camera
NP-BX1/M8 Rechargeable Lithium-Ion Battery Pack (3.6V, 1240mAh)
AC Adapter
Micro-USB Cable
Wrist Strap
Strap Adapter
Specifications:
200 ft (60 m) depth rating
Controls for all camera functions except Flash switch and Viewfinder switch; camera's built-in flash may be extended during installation
Slightly negative buoyancy in fresh water
1/4-20 threaded tray mounting with 3" (76mm) spacing
Weighs 2.8 lb (1270 g)
6.1 x 5.1 x 6.8" (155 x 130 x 173 mm)
3.9" diameter glass lens port
2 year limited warranty on housing
Ikelite Underwater Housing for Sony Cyber-shot RX100 Mark VI, VII
$ 595.00 - Sold Out
Ikelite Underwater Housing for Sony Cyber-shot RX100 Mark VI, VII
A large 20MP 1" sensor and incredibly fast autofocus make for great images above and below the surface... plus stunning 4K UHD video recording all in one very compact body.
Construction
Ergonomics
Flash
The optional Action Tray II with Left Handle # 2605.04 and Action Tray II Extension with Right Handle # 2605.05 provide a balanced grip and are the perfect platform for adding lighting accessories.
The Action Tray II mounts to the bottom of the housing with two 1/4-20 threaded screws for secure and rotation-free use. Our uniquely curved grips are rubberized for a comfortable grip and provide a quick release mechanism for adding and removing light arms.
Add the press-fit Macro Adapter # 9306.82 with any 67mm threaded macro wet lens for incredibly super macro photography. Compatible wet lenses include but are not limited to the INON UCL-165, Subsee Magnifier, Saga close up lenses, Nauticam CMC-1, and others.
The optional WD-4 Wide Angle Dome # 6430.4 provides a wider angle of view underwater without the edge distortion, vignetting, or weight typically associated with an external wide angle wet lens. The WD-4 is a 0.75x magnification factor and simply slides on and off of the housing's lens port.
3.9" diameter color filters press directly onto the front of the standard lens port. We offer color filters for Tropical Blue Water # 6441.46, Green Water # 6441.86, and a Yellow Barrier Filter # 6441.16 for fluorescence photography.
This port is optimized for use with wide angle wet lenses designed for the 28mm equivalent focal length, including the INON UWL-H100, Nauticam WWL-1, and others. Some vignetting (dark shadows around the edges of the image will be present at wider focal lengths. We recommend zooming to eliminate vignetting or cropping your images in post-production.
The front of the port also accepts 67mm threaded macro wet lenses by INON, Subsee, Saga, Nauticam, and others.
The standard lens port is removed and the Wide Angle Port M67 simply threads into the front of the housing for quick and easy installation. The camera cannot be zoomed past 70mm with this port attached. The camera will shut down if zoomed past this point.
A spare 1/2-20 threaded accessory port is provided on the side of the housing for easily installation of the optional Vacuum Kit # 47012. A hand pump with gauge allows you to draw a vacuum on the housing to simulate water pressure and check for leaks prior to entering the water.
Every unit is water pressure tested to 200 feet (60m) before it leaves our facility in Indianapolis.
Compatibility
Specifications
Controls for all camera functions except Flash switch and Viewfinder switch; camera's built-in flash may be extended during installation
Slightly negative buoyancy in fresh water
1/4-20 threaded tray mounting with 3" (76mm) spacing
Weighs 2.8 lb (1270 g)
6.1 x 5.1 x 6.8" (155 x 130 x 173 mm)
3.9" diameter glass lens port
2 year limited warranty
In the Box
Rear o-ring # 0109
Vinyl port cover # 0200.08
Silicone lubricant 1cc tube
Ikelite Underwater Housing for Canon PowerShot G5 X Mark II
$ 595.00
Ikelite Underwater Housing for Canon PowerShot G5 X Mark II
Canon went back to the drawing board with the new Canon PowerShot G5 X Mark II. Looking nothing like its predecessor, this camera shares more features with its sibling the Powershot G7 X Mark III. Sadly it lacks the strobe flash hotshoe from the original G5 X camera, but it is still a great choice for underwater use. The camera features a bright 24-120mm zoom lens, a large 1"-type CMOS sensor with support of RAW image capture at up to 30 fps. It also takes great 4K UHD video or un-cropped 1080 video at up to 120p.
This housing is designed to use the full capabilities of the camera up to depths of 200 feet (60 meters). A perfectly clear back provides a view of the camera and o-ring seal. The back is removable, not hinged, for extra durability and easier camera access. It attaches quickly and easily with two heavy duty stainless steel locking latches. All important camera controls are accessed via fully serviceable controls with premium soft touch control knobs. Ikelite housings are manufactured in the USA and come with an unparalleled access to support, photo advice, and service.
Construction
Our ABS-PC blend housing provides strength and corrosion free performance year with minimal maintenance. The specially formulated color deflects the sun to keep your camera running cooler, longer. Compared to black or clear housings, the light color provides superior contrast for enhanced view of the camera, LCD screen, and o-ring seal.
Ikelite products are designed, built and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit, function and waterproof integrity. We back our products with over 50 years of experience and service within the dive industry.
Ergonomics
Drop-in camera loading makes this housing a breeze to set up and shoot. Good ergonomics are critical when you need to concentrate on composition, focus, and proper exposure. A large, curved control lever puts the shutter control right where you need it. The shutter lever can be extended using the optional Trigger Extension # 4077.93 for perfect spacing when using a right-hand handle.
The rotating controls are all operated intuitively via premium soft-touch knobs. Stainless steel, direct-drive rotating controls are virtually fail-safe and user serviceable and adjustable in a pinch.
All rear camera buttons are accessible by smooth action, hard anodized aluminum push buttons for reliable performance and easy maintenance. These controls are clearly labeled by laser engraving on the back of the housing that never fades or falls off.
The camera's large LCD screen can be seen clearly through the back of the housing.
Flash
Due to the position of the camera's flash in relation to its lens, the built-in flash is not suitable to illuminate photos under water. For the best color and clarity, we recommend adding a filter, strobe, or constant-on light.
Two ports are provided for the connection of up to two Ikelite-, SEA&SEA-, or Olympus-type fiber optic cords. Any Ikelite DS strobe may be connected using the Fiber Optic Converter # 4401.3 and Fiber Optic Cord # 4501. The AF35 strobe is not compatible with this housing.
Tray with Handle(s)
The optional Action Tray II with Left Hand Quick Release Handle # 2605.04 and Action Tray II Extension with Right Handle # 2605.05 provide a balanced grip and are the perfect platform for adding lighting accessories.
The Action Tray mounts to the bottom of the housing with two 1/4-20 threaded screws for secure and rotation-free use. Our uniquely curved grips are rubberized for a comfortable grip and provide a quick release mechanism for adding and removing light arms.
Zoom, super macro, and semi-wide angle
The standard 3.9" diameter optical glass port accommodates the camera's full 24-120mm zoom range underwater.
Add the press-fit Macro Adapter # 9306.82 with any 67mm threaded macro wet lens for incredibly super macro photography. Compatible wet lenses include but are not limited to the INON UCL-165, Subsee Magnifier, Saga close up lenses, Nauticam CMC-1, and others.
Read more: Super Macro Underwater Photography Techniques
The optional WD-4 Wide Angle Dome # 6430.4 provides a wider angle of view underwater without the edge distortion, vignetting, or weight typically associated with an external wide angle wet lens. The WD-4 is a 0.75x magnification factor and simply slides on and off of the housing's lens port.
Read more: When to Use a Wide Angle Dome WD-3 or WD-4
3.9" diameter color filters press directly onto the front of the standard lens port. We offer color filters for Tropical Blue Water # 6441.46, Green Water # 6441.86, and a Yellow Barrier Filter # 6441.16 for fluorescence photography.
Optional 6" dry dome
The DC3 6" Dome Port # 6403 offers the best of everything: wide angle, macro, and over-under all on one dive. This special dome port replaces the housing's standard port and provides sharp 24mm wide angle and is perfect for split shots (half-in, half-out of the water). Approximately 3/4 of the camera's zoom range is usable behind the dome and macro images can be captured with the dome installed.
We recommend adding the Anti-Reflection Set of Foam # 6407 to reduce reflections when using the DC3 Dome Port.
Sealing and Vacuum Testing
There is no greater assurance than being able to see your camera and o-ring seal through the back of the housing. Our signature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel. Once the housing is closed you can see the o-ring form a solid, waterproof seal.
A spare 1/2-20 threaded accessory port is provided on the side of the housing for easily installation of the optional Vacuum Kit # 47012. A hand pump with gauge allows you to draw a vacuum on the housing to simulate water pressure and check for leaks prior to entering the water.
Every unit is water pressure tested to 200 feet (60m) before it leaves our facility in Indianapolis.
Compatibility
This housing is only compatible with the Canon PowerShot G5 X Mark II camera as shipped by the manufacturer. Other Canon cameras, including other G5 X and G7 X models, are not usable in this housing due to differences in control placement.
Specifications:
200 ft (60 m) depth rating
Controls for all camera functions except touchscreen and Flash pop-up button (flash must be extended when installing the camera in the housing)
Two built-in fiber optic ports
Slightly negative buoyancy in fresh water
1/4-20 threaded tray mounting with 3" (76mm) spacing
Weighs 2.7 lb (1215 g)
6.9 x 4.9 x 5.9" (175 x 124 x 150 mm)
3.9" diameter glass lens port supports full zoom range 24-120mm
2 year limited warranty
In the Box:
Housing
Rear o-ring # 0109 (installed)
Vinyl port cover # 0200 (installed)
.050" hex key # 0945.11
1/16" hex key # 0945.16
Silicone lubricant 1cc tube
Ikelite 200DLM/A Underwater Housing for Olympus OM-D E-M5 III Mirrorless Cameras
$ 950.00 - Sold Out
Ikelite 200DLM/A Underwater Housing for Olympus OM-D E-M5 III Mirrorless Cameras
The third in the series E-M5 cameras is not just a name change, but a redesigned camera body which is actually several millimeters smaller than its predecessor. The camera features the same 20 megapixel micro four-thirds sensor as the more expensive and highly respected E-M1 Mark II camera. The camera is quite capable with a 121-point hybrid autofocus system and 5-axis in-body image stabilization system. For videophiles, the E-M5 II can capture 4K 30p and 24p, plus high speed 1080/120p.
- 200 ft (60m) depth rating
- Extendable shutter release lever
- Extendable AE-L/AF-L button thumb lever for back button focus
- Interchangeable Dry Lock Micro port system including flat ports, 6"dome ports, and 8" dome ports
- Corrosion-proof ABS-PC construction
- Clear view back with laser engraved control markings
- Ergonomic, field serviceable direct-drive controls
- Accessory ports for optional vacuum system and TTL converter
- Supports LCD tilt
- Made in the USA
Good ergonomics are critical when you need to concentrate on composition, focus, and proper exposure. Large, curved control levers put the most important controls right where you need them: shutter and autofocus (via the AE-L/AF-L button). This combination allows you to shoot with or without back button focus, an advanced technique that is useful for tack sharp focus of super macro and fast moving subjects. Each lever can be extended using the optional Shutter Trigger Extension # 4077.93 for perfect spacing when using a right-hand handle.
All rotating controls are operated intuitively via premium soft-touch knobs. Stainless steel, direct-drive rotating controls are virtually fail-safe and user serviceable and adjustable in a pinch.
Camera buttons are accessible by smooth action, hard anodized aluminum push buttons for reliable performance and easy maintenance. These controls are clearly labeled by laser engraving on the back of the housing that never fades or falls off.
Two 1/4-20 threaded mounting points are included on the bottom of the housing for simple, rotation-free attachment of a tray and handle system. Handles provide improved ergonomics underwater and are the foundation for your lighting mounts. The Tray with Dual Quick Release Handles # 9523.64 is the most popular choice for both handling and attachment of accessories.
Drawing a vacuum on the system also provides extra security at the surface of the water, especially important when using the housing in rough surf.
Get the brightest and sharpest view of the camera's OLED EVF by adding an optional Magnified Viewfinder. The Supereye removes quickly and easily for the attachment of a Straight Enhanced Magnified Viewfinder # 6890.2 or 45° Magnified Viewfinder (Type 3) # 6891.3.
You can enjoy the fastest and most accurate TTL exposure on the market by adding the Olympus TTL Kit # 46032 and a compatible Ikelite DS strobe. Rear curtain flash synchronization is supported. Exposure compensation can be used added or subtracted in the camera.
Reliable locking connectors between the hotshoe and bulkhead make it easy to install the TTL hotshoe or carry back up parts when traveling to remote locations.
This camera does not feature a built-in flash for the triggering of fiber optic strobes.
A bright constant-on video light can be used instead of or in addition to a flash. A constant-on light is not as bright as a strobe flash. Constant-on lights do provide added versatility because they can be used for focus assist and for improved colors when shooting video.
There is a simple rule that brighter is better underwater. A high-quality lighting system can produce professional quality results.
This housing accepts ports from our DLM Port System to accommodate a selection of the best zoom, macro, and wide angle lenses for underwater use. Our custom optical grade acrylic domes components provide the color, clarity, and durability of glass at a fraction of the travel weight and cost.
Durability and corrosion free performance
Our white ABS-PC blend housing provides strength and corrosion free performance year with minimal maintenance. ABS-PC is lighter than aluminum for convenience during travel and less drag underwater. The specially formulated color deflects the sun to keep your camera running cooler, longer. Compared to black or clear housings, the light color provides superior contrast for enhanced view of the camera, LCD screen, and o-ring seal.
Compatibility
This housing is only compatible with the Olympus cameras as shipped by the manufacturer. Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories.
Specifications
DLM Type A port mount
Controls for all camera functions except Fn lever, preview button, and diopter adjustment dial
Two 1/4-20 threaded tray mounts with 3" (76mm) spacing
Slightly negative buoyancy in fresh water
Actual buoyancy varies depending on choice of lens and port
2.7 lbs (1238 g)
7.75 x 5.75 x 5.25" (197 x 146 x 133 mm)
ABS-PC, acrylic, and acetal construction
2 year limited warranty
In the Box
Rear O-Ring # 0110 (installed)
Front O-Ring # 0132.36 (installed)
.050" Hex Key # 0945.11
1/16" Hex Key # 0945.16
Silicone Lubricant 1cc Tube
Lens port sold separately; A compatible DLM lens port is required for waterproof operation.
Ikelite 200DL Underwater Housing for Nikon Z50 Mirrorless Digital Cameras
$ 1,695.00
Ikelite 200DL Underwater Housing for Nikon Z50 Mirrorless Digital Cameras
Ikelite SKU: 71065 | Helix SKU: IK71065
Overview
Nikon Z50 Mirrorless Cameras
The little brother to Nikon's Z6 and Z7 full frame mirrorless cameras, the Z50 features a 20.9 megapixel APS-C (DX-format) sensor. It records UHD 4K/30p video using the full width of its sensor. A bright 2.36M-dot OLED viewfinder provides a good view for both composition and image review.
The camera body weighs in at just under 1 pound (450 g) and accepts both newer Z-mount lenses and F-mount lenses using the FTZ adapter. The camera's CIPA battery life is 320 shots using the rear LCD or 280 shots using the electronic viewfinder (EVF).
Lens Ports
This housing features our robust Dry Lock (DL) port system. "Dry Lock" refers to the placement of the o-ring on the outside of the port mount. This improves visibility and reduces the chances of water dropping onto your precious camera sensor. DL ports are the lightest on the market, yet robust and capable of standing up to rough surf. Attachment is quick and secure. A system of extensions can accommodate a huge variety of lenses with ease.
Most popular zoom lenses and select lens focus rings can be engaged using simple gearing that puts adjustment right at your fingertips. A large, soft-touch knob on the side of the housing makes fine tuned adjustments a breeze. Zoom and focus gears differ depending on which lens you are using. Zoom gears sold separately.
Confidence
The unique rear seal design prevents accidental twisting or stretching of the o-ring for simple and confident assembly. We have eliminated the need for an o-ring groove or channel which can trap sand, dirt, or debris. Three double-passivated stainless steel locking lid snaps are simple to use and virtually unbreakable. The clear back allows you to see the o-ring form a solid, watertight seal as it closes.
Vacuum Testing
A vacuum valve is installed standard on the side of the housing. The vacuum valve is designed to be low profile to avoid interference with controls. The optional Vacuum Pump with Gauge # 47011 allows you to draw a vacuum on the housing to check for leaks prior to entering the water.
Drawing a vacuum on the system also provides extra security at the surface of the water, especially important when using the housing in rough surf.
M16 Accessory Port
The spare M16 threaded accessory port provides an attachment point for third party accessories including HDMI bulkheads.
TTL Exposure
This housings supports your choice of shooting with manual strobe exposure or adding a TTL converter depending on your application. The flash bulkhead is located on the top of the case to alleviate strain on the sync cord.
You can enjoy the fastest and most accurate TTL exposure on the market by adding the DL1 DS Link TTL Converter # 46056 and a compatible Ikelite DS strobe. The DL1 supports rear curtain synchronization and exposure compensation can be added or subtracted in the camera.
Reliable locking connectors between the hotshoe and bulkhead make it easy to install the TTL hotshoe or carry back up parts when traveling to remote locations.
Built-in Flash
The camera's built-in flash may be used to trigger external fiber optic strobes. Two fiber optic ports are provided on the top of the housing for attachment of compatible fiber optic cords (see compatibility information below). The built-in flash is not usable for lighting a subject underwater.
Ergonomics
Good ergonomics are critical when you need to concentrate on composition, focus, and proper exposure. Large, curved control levers put the most important controls right where you need them: shutter and autofocus (via the AE-L/AF-L button). This combination allows you to shoot with or without back button focus, an advanced technique that is useful for tack sharp focus of super macro and fast moving subjects. Each lever can be extended using the optional Trigger Extension # 4077.93 for perfect spacing when using a right-hand handle.
The rotating controls are all operated intuitively via premium soft-touch knobs. An oversized, lobed knob puts the zoom/focus knob at your fingertips while your left hand stays on the handle. Stainless steel, direct-drive rotating controls are virtually fail-safe and user serviceable and adjustable in a pinch.
All rear camera buttons are accessible by smooth action, hard anodized aluminum push buttons for reliable performance and easy maintenance. These controls are clearly labeled by laser engraving on the back of the housing that never fades or falls off.
Set-Up
The camera mount is front-loading for easy installation and removal. A small mounting plate attaches to the bottom of the camera and secures in the front of the housing. The camera mounting plate does not need to be removed from the camera for surface use or when changing the battery or memory cards. The mounting plate features a 1/4-20 threaded mount on the bottom so that it can be attached to a tripod on the surface.
Viewfinders
The included SuperEye Viewfinder provides an enhanced view of the camera's electronic viewfinder when viewed through a dive mask. The viewfinder removes quickly and easily for the attachment of an optional Straight Magnified Viewfinder # 6890.2 or 45° Magnified Viewfinder (Type 3) # 6891.3.
Camera Compatibility
This housing is only compatible with Nikon Z50 cameras as shipped by the manufacturer. Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories.
Differences in lens and control placement prevent other Nikon camera models from being used in or adapted to this housing. We are not aware of any other models which may be used in or adapted to this particular housing.
Specifications:
200' (60m) depth rating
Compatible with DL system lens ports
Controls are provided for all camera functions except: Fn1, Fn2, Flash pop-up, Diopter adjustment dial, and Touchscreen;
1/4-20 thread base mounts with 3.5" spacing
Slightly positive buoyancy in fresh water
Actual buoyancy varies depending on choice of lens and port
Housing 4.77 lb (2165 g)
Tray with left handle 11 oz (312 g)
9 x 7 x 6.25" (229 x 178 x 159 mm)
Vacuum valve included (pump sold separately)
Included Ikelite ICS-5 bulkhead connector with manual hotshoe for reliable electrical triggering of underwater strobes; Optional TTL accessories provides automatic exposure with compatible Ikelite DS strobes
ABS-PC construction is fundamentally corrosion-resistant
Made in the USA; Individually inspected for fit and water pressure tested to depth
2 year limited warranty
In the Box
Housing
Rear O-ring # 0132.59 (installed)
Front O-ring # 0132.45 (installed)
Zoom Gear Retainer # 75900 (installed)
Port Hole Cover # 0200.92 (installed)
Waterproof Bulkhead Cap # 9104.7 (installed)
Base with Left-Hand Quick Release Handle # 4077.67 (installed)
Tool for Zoom Gear Retainer # 0945.06
.050" Hex Key # 0945.11
1/16" Hex Key # 0945.16
Silicone Lubricant 1cc Tube
Ikelite DL3 DS Link Panasonic / Olympus TTL Converter Ikelite PT2 Hotshoe Kit
$ 375.00
Ikelite DL3 DS Link Panasonic / Olympus TTL Converter Ikelite PT2 Hotshoe Kit
Ikelite SKU: 46037 | Helix SKU: IK46037
TTL strobe exposure opens up a whole new world of creative possibilities for both wide angle and macro photographer. Let your camera control the strobe output so that you can devote your attention to adjusting your camera's settings, composing the shot, and focusing on your subject.
Key Advantages
- Faster, more accurate, and more reliable than fiber optic TTL triggers
- Always ready when you are - no batteries required
- Switch between TTL and manual exposure with the press of a button
- Supports flash exposure (EV) compensation set in the camera
- Supports rear curtain sync
- Improves strobe battery life and recycle time
- One TTL converter supports a wide selection of camera models
- Independently waterproof sealed
About TTL
TTL or "Thru-the-Lens" flash metering means the camera evaluates the scene and communicates exposure information directly to the compatible flash. The camera automatically adjusts the power output of the external flash so you don't have to.
TTL exposure is faster and typically more accurate than setting the flash output manually. TTL can be the difference between getting a properly exposed image or not, especially when shooting fast-moving subjects and subjects that are moving towards or away from you. TTL is by far the easiest way to shoot perfectly exposed macro photography and allows you to concentrate on focus and framing.
Some people think TTL is only good for macro... but they're wrong! When shooting wide angle or close focus wide angle (CFWA), set your camera to properly expose the background and let the DL2 adjust your strobe intensity for proper exposure of the foreground.
Ikelite was the first company to introduce TTL for underwater strobes with Olympus digital cameras, and continues to set the standard for accuracy of Olympus TTL flash protocol.
Electrical flash triggering
Connecting an electrical sync cord is as quick and easy as screwing in a light bulb. Electrical triggering supports greater accuracy, faster rapid firing, and less missed flashes as compared to fiber optic triggering. Use of electrical TTL also dramatically increases strobe battery life.
The included PT2 TTL Hotshoe is necessary for TTL operation with most Ikelite DL housings. See Housing Compatibility information below.
The ultimate flexibility
Switch between TTL and manual flash exposure modes with the simple push of a button. A super bright LED indicator light shows you which mode you are in with a quick glance. When in TTL mode, flash exposure (EV) compensation can be accessed quickly and easily through the camera's menus. The DL3 DS Link fully supports rear curtain sync flash modes.
The DL3 DS Link is independently waterproof sealed and can be used with a wide array of camera models. Simply use a dual sync cord to fire two strobes in TTL from a single DL3 DS Link converter.
Housing Compatibility
- Ikelite 200DL Housing for Panasonic Lumix DC-S1, DC-S1R # 71301
Strobe Compatibility
- DS50 strobes: above serial number 75510 with update
- DS51 strobes: above serial number 78700
- DS125 strobes: above serial number 7928
- DS160, DS161 strobes: all
- DS200 strobes: above serial number 7163
- Not compatible with non-digital Ikelite strobes including but not limited to SS50, SS200, SS400, Ai, 100/A
- Not compatible with SEA&SEA, INON, or other non-Ikelite strobes
Sync Cord Compatibility
- Ikelite Housing to Ikelite Strobes # 45151
- Ikelite Housing to Two Ikelite Strobes # 45152
- Ikelite Housing to Ikelite Strobe # 4103.51 (out of production)
- Ikelite Housing to Two Ikelite Strobes # 4103.52 (out of production)
Specifications
3.4 ounces (97g)
In the Box
DL3 DS Link TTL converter # 46033
PT2 Panasonic & Olympus TTL hotshoe # 46035
Ikelite DL Compact 8 inch Dome Port Extended
$ 349.95
Ikelite DL Compact 8 inch Dome Port Extended
Ikelite SKU: 75348 | Helix SKU: 75348
Overview
A low volume dome which provides similar image quality to our standard 8” dome port in with a reduced size ideal for close focus wide angle and great for travel. This port was originally designed for use with the Tokina 10-17mm Fisheye lens when used with compatible 200DL and 50 DL housings.
This port can be attached directly to housings featuring the Dry Lock (DL) port system or combined with DL extensions.
Specifications
Optical grade acrylic dome
Acetyl body
6.2" diameter x 2.1" (157 x 53 mm)
Weighs 10.4 oz (295 g)
In the Box
Dome port
Securing thumbscrews (set of 3) # 9249.7 (installed)
Dome shade # 75346 (installed)
Neoprene cover # 0200.1 (installed)
Silicone lubricant 1cc tube
Ikelite 45 Degree Magnified Viewfinder for DSLR and Mirrorless Housings (Type 3)
$ 949.95
Ikelite 45 Degree Magnified Viewfinder for DSLR and Mirrorless Housings (Type 3)
Ikelite SKU: 6891.3 | Helix SKU: 68913
Overview
Enjoy enhanced viewing of your camera's viewfinder while creating space for your regulator, making composition more comfortable. Easy installation on almost any Ikelite housing for a DSLR or mirrorless camera.
Compatibility
Three versions of this viewfinder are available to provide adequate control clearance. Choose Type 1, 2, or 3 based on your camera and housing model.
The Type 3 viewfinder may be used with any housing that calls for a Type 1 viewfinder. The Type 1 viewfinder cannot be used with housings that require a Type 3.
Refer to the compatibility chart in the Documentation section.
Specifications
Anodized aluminum, glass, and acetyl
1.0X magnification
2.23 x 3.24 x 3.82" (57 x 82 x 97 mm)
Weighs 11.7 oz (332 g)
In the Box
Viewfinder
Protective cap
Attachment tool # 0945.04
Spare o-ring # 0132.22
