ProMaster Dovetail Macro Sliding Rail
$ 99.95
ProMaster Dovetail Macro Sliding Rail
Mfr SKU: 1802 | Helix SKU: PR18023
Overview:
The ProMaster Dovetail Macro Sliding Rail fits ProMaster tripods, heads, and gimbals that use the Dovetail Mounting System, as well as other Arca-type products. The base of the rail attaches to a dovetail tripod head and can be slid back and forth for best positioning.
Two dovetail clamps are connected to the base rail. The lower clamp slides along the rail to adjust the position of your camera and lens. The upper clamp acts as a quick release receiver for your camera to quickly connect to the system. The upper clamp can be mounted in one of four positions, allowing your camera or lens to be mounted in a front-to-back or side-to-side motion.
Multiple scales are etched into the Macro Sliding Rail to aid in repeatable setups.
This kit also includes a ProMaster 70mm Quick Release Plate (1795) which incorporate two removable safety bolts to prevent it from accidentally sliding out of the clamp.
This system is excellent for macro photography in which small movements to the camera's distance relative to the subject can be used to change focus, composition, and reproduction ratio.
Features:
- Rail Dimensions: 41 mm high x 200 mm long x 73 mm wide.
- Rail Weight: 10 5/8 oz / 301 g
- Length of Travel: 6 3/8" / 162 mm
- QR Plate Dimensions: 70 mm long x 38 mm wide
- QR Plate Weight: 1 3/4 oz / 50 g
ProMaster Dovetail Nodal Slider - 100mm
$ 44.95
ProMaster Dovetail Nodal Slider - 100mm
Mfr SKU: 1774 | Helix SKU: PR17743
Overview:
ProMaster’s Nodal Sliders are compatible with ProMaster tripods, heads, and gimbals that use the Dovetail Mounting System, as well as other Arca-type products.
A Nodal Slider allows a lens to slide backward and forward on a tripod head, so that the lens’ nodal point (sometimes called the “no-parallax point”) can be perfectly centered over the head. Centering the nodal point means you can rotate the camera and lens on the head without an unnatural arc in the panning movement. This helps photographers create perfectly stitched panoramics, but this movement can also be very helpful in video work.
A Nodal Slider can also be used to change the mounting direction of a camera by 90 degrees. Some tripod heads, like most gimbal heads, only allow front-to-back mounting of the QR plate. When using an L-Bracket or a QR plate that’s mounted in a side-to-side direction, a Nodal Slider will allow you to attach the camera to the gimbal without adjusting the plate or L-Bracket.
Features:
- Integrated bubble level
- Strap slot
- Sliding 1/4"-20 mounting bolt
- Numerous 1/4"-20 mounting ports
- Scales for repeatable setups
Specifications:
- Dimensions: 129 mm long x 38 mm wide
- Weight: 3 7/8 oz / 110 grams
ProMaster Dovetail Nodal Slider - 140mm
$ 54.95 - Vendido
ProMaster Dovetail Nodal Slider - 140mm
Mfr SKU: 1781 | Helix SKU: PR17811
Overview:
ProMaster’s Nodal Sliders are compatible with ProMaster tripods, heads, and gimbals that use the Dovetail Mounting System, as well as other Arca-type products.
A Nodal Slider allows a lens to slide backward and forward on a tripod head, so that the lens’ nodal point (sometimes called the “no-parallax point”) can be perfectly centered over the head. Centering the nodal point means you can rotate the camera and lens on the head without an unnatural arc in the panning movement. This helps photographers create perfectly stitched panoramics, but this movement can also be very helpful in video work.
A Nodal Slider can also be used to change the mounting direction of a camera by 90 degrees. Some tripod heads, like most gimbal heads, only allow front-to-back mounting of the QR plate. When using an L-Bracket or a QR plate that’s mounted in a side-to-side direction, a Nodal Slider will allow you to attach the camera to the gimbal without adjusting the plate or L-Bracket.
Features:
- Integrated bubble level
- Strap slot
- Sliding 1/4"-20 mounting bolt
- Numerous 1/4"-20 mounting ports
- Scales for repeatable setups
Specifications:
-
Dimensions: 169 mm long x 38 mm wide
-
Weight: 4 11/16 oz / 133 g
Rhino Basic Slider Bundle
$ 800.00
Rhino Basic Slider Bundle SKU253
Rhino SKU: SKU253 | Helix SKU: RHSKU253
Overview
This is the perfect bundle for minimalist filmmaker. No batteries or electronics to rely on. Just simple, smooth, cinematic filming.
Features
- Interia powered dampening
- Creates ultra smooth slider shots
-
No batteries to charge
Includes
- Rhino Slider Carbon 24"
- Rhino Flywheel
- 24" Carrying Case
Rhino Carbon 24" Rails
$ 250.00
Rhino Carbon 24" Rails
Rhino SKU: SKU209 | Helix SKU:RHSKU209
Overview
Interchangeable rails are the heart of the Rhino System. They allow you to completely change the weight, length, and load capacity of your slider setup without having to buy a completely new setup.
The Carbon 24” Rails are the most versatile of the four options. They are short, light, and super rigid making them great for most everyday shoots.
Weight: 1lb
Load Capacity: 15lbs
We updated the rails with our new Tripod Quick Mount System that lets you mount your slider to a tripod in less time and without having to awkwardly spin it around.
Features
- Quickly interchange your rails to transform your slider
- Ultra light
- Precision ground carbon fiber
- Includes the new Tripod Quick Mount System
Includes
- Carbon 24” Rails
Rhino Carbon 42" Rails
$ 450.00
Rhino Carbon 42" Rails
Interchangeable rails are the heart of the Rhino System. They allow you to completely change the weight, length, and load capacity of your slider setup without having to buy a completely new setup.
The Carbon 42” Rails are perfect for time-lapse shots and longer interview setups. Thanks to the new dual Tripod Quick Mount plates they are 5x more torsionally rigid than our previous 42” rails. This makes them much for versatile and less prone to twist when filming with heavy setups.
Weight: 1lb 12oz
Load Capacity: 10lbs
We updated the rails with our new Tripod Quick Mount System that lets you mount your slider to a tripod in less time and without having to awkwardly spin it around.
Features
- Quickly interchange your rails to transform your slider
- Ultra light and 5x more rigid than our previous version
- Precision ground carbon fiber
- Includes the new Tripod Quick Mount System
- Easy mounting to dual tripods
In the box
- Carbon 42” Rails
Rhino Carrying Case 24"
$ 100.00
Rhino Carrying Case 24"
Rhino SKU: SKU094 | Helix SKU: RHSKU094
Overview
PRODUCT DESCRIPTION:
The Slider Carrying Case is a padded soft shell case that is designed to carry your complete Rhino Slider setup when you’re filming locally. It allows you to store your Rhino Slider with Arc II, Focus, and Motor attached so you don’t have to take down your kit everytime you film at a new location. Setup is as simple as mounting to a tripod using the new Tripod Quick Mount System and powering your gear on.
Note: This version is slightly longer than the previous carrying case to allow for the longer motor to fit assembled.
Fits:
- Assembled Rhino Slider 24” or 42” (with Arc II, Focus, and Motor attached)
- Interchangeable Rails (on 42” version only)
Features
- Safely carry your entire Rhino Slider setup completely assembled
- Internal straps secure your slider
- Accessory pocket on the outside
- Padded shoulder strap
In the box
- Slider Carrying Case 24”
Rhino Carrying Case 42"
$ 150.00 - Vendido
Rhino Slider EVO Carrying Case 42"
Rhino SKU: SKU095 | Helix SKU: RHSKU095
Overview
PRODUCT DESCRIPTION:
The Slider Carrying Case is a padded soft shell case that is designed to carry your complete Rhino Slider setup when you’re filming locally. It allows you to store your Rhino Slider with Arc II, Focus, and Motor attached so you don’t have to take down your kit everytime you film at a new location. Setup is as simple as mounting to a tripod using the new Tripod Quick Mount System and powering your gear on.
Note: This version is slightly longer than the previous carrying case to allow for the longer motor to fit assembled.
Fits
- Assembled Rhino Slider 24” or 42” (with Arc II, Focus, and Motor attached)
- Interchangeable Rails (on 42” version only)
Features
- Safely carry your entire Rhino Slider setup completely assembled
- Internal straps secure your slider
- Accessory pocket on the outside
- Padded shoulder strap
In the box
- Slider Carrying Case 42”
Rhino Essentials Slider Bundle
$ 2,350.00 - Vendido
Rhino Essentials Slider Bundle
Rhino SKU: SKU252 | Helix SKU: RHSKU252
Overview
This bundle has everything you need to motorized your slider and start getting incredible 3-axis movement.
Make sure to add Rhino Focus to your bundle to keyframe your focus for even more dynamic shots.
Features
- Ultra light carbon fiber rails are easy to pack
- High Speed Motor lets you set-up moves faster
- Carry your gear completely set-up in the soft shell case
In the box
- Rhino Slider Carbon 24”
- Rhino Arc II
- Rhino Motor - High Speed
- Slider Carrying Case 24”
Rhino Everyday Backpack
$ 80.00 - Vendido
Rhino Everyday Backpack
Rhino SKU: ROV005 | Helix SKU: RHROV005
Overview
The ROV Everyday Backpack is custom designed to fit your ROV Everyday Slider. It allows you to take ROV everywhere your camera does to capture beautiful cinematic slider shots.
Features
- Carry and protect your ROV Everyday Slider
- Durable nylon construction
- Side handle for easy carry
- Accessory pockets for your mobile lenses and gear
In the box
- Everyday backpack
Rhino High Torque Motor
$ 300.00
Rhino High Torque Motor
Achieve vertical slides with up to a 10lb payload with the new High Torque Motor. It attaches onto the end plate of any Rhino Slider (Compatible with both EVO and the new version) in a few seconds. Connect it to Rhino Arc II with the included RJ45 cable and start automating your camera movement.
Features
- Capable of moving a 10lb load at a 90 degree angle (motor must be on the top end of the slider)
- Moves your Rhino Slider carriage at 1”/second
- Installs in seconds
- Super low profile
- Doesn’t have to be removed to fit in Rhino soft shell carrying cases
In the box
- High Speed Motor
- 24” Motor Cable
- 42” Motor Cable
- Rhino branded box
Rhino Pro 42" Rails
$ 550.00 - Vendido
Rhino Pro 42" Rails
Interchangeable rails are the heart of the Rhino System. They allow you to completely change the weight, length, and load capacity of your slider setup without having to buy a completely new setup.
The Pro 42” Rails are perfect for interview setups running heavier cameras. Thanks to the new dual Tripod Quick Mount plates they are 5x more torsionally rigid than our previous 42” rails. This makes them much for versatile and less prone to twist when filming with heavy setups.
Weight: 7lbs 2oz
Load Capacity: 30lbs
We updated the rails with our new Tripod Quick Mount System that lets you mount your slider to a tripod in less time and without having to awkwardly spin it around.
Features
- Quickly interchange your rails to transform your slider
- 5x more rigid than our previous version
- Precision ground solid stainless steel
- Includes the new Tripod Quick Mount System
- Easy mounting to dual tripods
In the box
- Pro 42” Rails
Rhino Rhino Slider Carbon 24"
$ 600.00
Rhino Rhino Slider Carbon 24"
Rhino SKU: SKU201 | Helix SKU: RHSKU201
Overview
Rhino Slider Carbon 24” is the ultimate all-round camera slider. Lightweight yet extremely versatile, it will fit most filmmaker’s needs.
Weight: 4lbs
Load Capacity: 15lbs
We updated the rails with our new Tripod Quick Mount System that lets you mount your slider to a tripod in less time and without having to awkwardly spin it around.
Built around ultra-rigid carbon fiber rails and a precision machined aluminum chassis, it’s the essential building block for your motion control system. Outfit it with either Rhino Flywheel for a quick and smooth setup or Rhino Arc II & Rhino Motor for a complete 3-axis motion control system.
Features
- Tripod Quick Mount System lets you mount your slider to a tripod without spinning it around
- Interchangeable rails let you swap between any of Rhino’s 4 rail options
- Ultra-rigid carbon fiber rails
- Built in belt drive system is compatible with Rhino Flywheel and Rhino Motor
- All-terrain legs let you level your slider on any terrain
- Integrated carriage brake securely locks your carriage at any point on the slider
-
¼-20 and ⅜-16 Tripod threads on end plates and center plate (end plate threads are not accessible if Rhino Motor is mounted)
In the box
- Rhino Slider Carbon 24”
- Rhino branded box
Rhino RŌV PRO - Everyday Slider
$ 400.00 - Vendido
Rhino RŌV PRO - Everyday Slider
Rhino SKU: ROV003 | Helix SKU: RHROV003
Overview
PRODUCT DESCRIPTIONS:
- RŌV PRO (Everyday & Traveler)
- Short Description
- RŌV Pro is an extremely portable, app controlled motorized slider that you’ll actually bring on your next shoot. It’s ultra compact and controlled by your phone with an extremely intuitive app. RŌV Pro even has the ability to capture time lapses seamlessly with a built in intervalometer. Note: RŌV is not currently compatible with iPhone Xs and Xs Max in video mode (using your phone for video). We’re working on an app update to address this.
- Features
- Includes ROV Pro Everyday, Quick Release Ball-head, Smartphone Mount, Variable ND Filter
- Captures ultra smooth cinematic video on your DSLR or Mirrorless camera
- Holds up to a 5lb camera with the included quick release ball mount
- Includes Phone Mount to film b-roll on your smartphone
- Time-lapse mode can capture long exposures at night (optional cable not included)
- Motorized movement with a built in 24 hour rechargeable battery
- Insanely long 24hr battery life
- Fast setup with one touch to start moving
- Premium machined aluminum finish
- Variable speeds
- Looping mode
- Controlled by your phone over Bluetooth
- Features (Long Form)
- The slider you’ll actually take with you
- ROV Pro is an extremely portable, app controlled motorized slider that you’ll actually bring on your next shoot.
- All in one
- Insanely fast setup
- Time-Lapse
- Ditch your bulky gear without compromising quality. ROV Pro has an integrated 2.5mm port for triggering your cameras’ shutter during a time-lapse. Getting a time-lapse has never been easier with the built-in intervalometer. *A shutter release cable is not included and can be purchased separately.
- Versatility
- Build Quality
- A built-in high capacity battery will keep your adventure powered for up to 24 hours of motion.
- Specs
- Specs
- Everyday - 17" L x 4.5" W x 1.5" H 1lb 5oz
- Traveler - 25" L x 4.5" W x 1.5" H 1lb 7oz
- Speeds - Minimum .25in/sec, Maximum 1.42in/sec
- In the box
- RŌV PRO Motorized Slider
- Charging Cable
- Variable ND filter for filming cinematic video on your phone
- Quick Start Guide
Rhino RŌV PRO - Traveler Slider
$ 450.00 - Vendido
Rhino RŌV PRO - Traveler Slider
Rhino SKU: ROV004 | Helix SKU: RHROV004
Overview
PRODUCT DESCRIPTIONS
- RŌV PRO (Everyday & Traveler)
- Short Description
- RŌV Pro is an extremely portable, app controlled motorized slider that you’ll actually bring on your next shoot. It’s ultra compact and controlled by your phone with an extremely intuitive app. RŌV Pro even has the ability to capture time lapses seamlessly with a built in intervalometer.
- Note: RŌV is not currently compatible with iPhone Xs and Xs Max in video mode (using your phone for video). We’re working on an app update to address this.
- Features
- Includes ROV Pro Everyday, Quick Release Ball-head, Smartphone Mount, Variable ND Filter
- Captures ultra smooth cinematic video on your DSLR or Mirrorless camera
- Holds up to a 5lb camera with the included quick release ball mount
- Includes Phone Mount to film b-roll on your smartphone
- Time-lapse mode can capture long exposures at night (optional cable not included)
- Motorized movement with a built in 24 hour rechargeable battery
- Insanely long 24hr battery life
- Fast setup with one touch to start moving
- Premium machined aluminum finish
- Variable speeds
- Looping mode
- Controlled by your phone over Bluetooth
- Features (Long Form)
- The slider you’ll actually take with you
- ROV Pro is an extremely portable, app controlled motorized slider that you’ll actually bring on your next shoot.
- All in one
- Insanely fast setup
- Time-Lapse
- Ditch your bulky gear without compromising quality. ROV Pro has an integrated 2.5mm port for triggering your cameras’ shutter during a time-lapse. Getting a time-lapse has never been easier with the built-in intervalometer. *A shutter release cable is not included and can be purchased separately.
- Versatility
- Build Quality
- A built-in high capacity battery will keep your adventure powered for up to 24 hours of motion.
- Specs
- Specs
- Everyday - 17" L x 4.5" W x 1.5" H 1lb 5oz
- Traveler - 25" L x 4.5" W x 1.5" H 1lb 7oz
- Speeds - Minimum .25in/sec, Maximum 1.42in/sec
- In the box
- RŌV PRO Motorized Slider
- Charging Cable
- Variable ND filter for filming cinematic video on your phone
- Quick Start Guide
Rhino Slider 24" Belt
$ 5.00 - Vendido
Rhino Slider 24" Belt
Rhino SKU: SKU262 | Helix SKU: RHSKU262
Overview
This is the belt for a 24” Rhino Slider. Buy this if you’re looking for a replacement if yours got lost.
In the box
- Rhino Slider 24” Belt
Rhino Slider Carbon 42"
$ 800.00
Rhino Slider Carbon 42"
Rhino SKU: SKU202 | Helix SKU:RHSKU202
Overview
Rhino Slider Carbon 42” is the ultimate time-lapse camera slider. The long yet light rails let you capture more movement for capturing incredible time-lapses.
Specs
Weight: 4lbs 12oz
Load Capacity: 10lbs
We updated the rails with our new Tripod Quick Mount System that lets you mount your slider to a tripod in less time and without having to awkwardly spin it around. The 42” version has 2 extra plates that make mounting to two tripods infinitely easier increase the torsional rigidity by 5x.
Built around ultra-rigid carbon fiber rails and a precision machined aluminum chassis, it’s the essential building block for your motion control system. Outfit it with either Rhino Flywheel for a quick and smooth setup or Rhino Arc II & Rhino Motor for a complete 3-axis motion control system.
Features
- Tripod Quick Mount System lets you mount your slider to a tripod without spinning it around
- Interchangeable rails let you swap between any of Rhino’s 4 rail options
- Ultra-rigid carbon fiber rails
- Built in belt drive system is compatible with Rhino Flywheel and Rhino Motor
- All-terrain legs let you level your slider on any terrain
- Integrated carriage brake securely locks your carriage at any point on the slider
-
¼-20 and ⅜-16 Tripod threads on end plates and center plate (end plate threads are not accessible if Rhino Motor is mounted)
Includes
- Rhino Slider Carbon 42”
- Rhino branded bo
Rhino Slider Carriage Assembly
$ 210.00
Rhino Slider Carriage Assembly
Rhino SKU: SKU236 | Helix SKU: RHSKU236
Overview
Rhino Slider Left Leg Assembly
$ 30.00
Rhino Slider Left Leg Assembly
Rhino SKU: SKU238 | Helix SKU: RHSKU238
Overview
This is the Left Leg for a Rhino Slider. Buy this if you’re looking for a replacement or if you want to build out a slider from your spare rails.
In the box
- Rhino Slider Left Leg
Rhino Slider Pro 42"
$ 900.00
Rhino Slider Pro 42"
Rhino SKU: SKU204 | Helix SKU:RHSKU204
Overview
Rhino Slider Pro 42” is the go to slider for professional filmmakers. The long, heavy duty rails let you capture more movement for more dynamic interview shots.
Specs
Weight: 11lbs 2oz
Load Capacity: 30lbs
We updated the rails with our new Tripod Quick Mount System that lets you mount your slider to a tripod in less time and without having to awkwardly spin it around. The 42” version has 2 extra plates that make mounting to two tripods infinitely easier and increase the torsional rigidity by 5x.
Built around ultra-rigid carbon fiber rails and a precision machined aluminum chassis, it’s the essential building block for your motion control system. Outfit it with either Rhino Flywheel for a quick and smooth setup or Rhino Arc II & Rhino Motor for a complete 3-axis motion control system.
Features
- Tripod Quick Mount System lets you mount your slider to a tripod without spinning it around
- Interchangeable rails let you swap between any of Rhino’s 4 rail options
- Ultra-rigid stainless steel rails
- Built in belt drive system is compatible with Rhino Flywheel and Rhino Motor
- All-terrain legs let you level your slider on any terrain
- Integrated carriage brake securely locks your carriage at any point on the slider
-
¼-20 and ⅜-16 Tripod threads on end plates and center plate (end plate threads are not accessible if Rhino Motor is mounted)
Includes
- Rhino Slider Pro 42”
- Rhino branded box
Rhino Slider Right Leg Assembly
$ 30.00
Rhino Slider Right Leg Assembly
Rhino SKU: SKU237 | Helix SKU: RHSKU237
Overview
This is the Right Leg for a Rhino Slider. Buy this if you’re looking for a replacement or if you want to build out a slider from your spare rails.
In the box
- Rhino Slider Right Leg
Rhino Slider Upgrade Kit
$ 350.00
Rhino Slider Upgrade Kit
Rhino SKU: SKU235 | Helix SKU: RHSKU235
Overview
This kit allows you to turn your spare rails into a complete Rhino Slider. If you have an Ultimate Slider Bundle or just an extra set of rails, use this kit to streamline your workflow if you don’t want to swap out rails every time your needs change.
Note: If you don’t have a spare belt with your rails you’ll need to buy one for this kit to be motorized.
In the box
- Rhino Slider Carriage
- Pulley End Plate
- End Plate
- 2x Right Leg
- 2x Left Leg
Rhino Time Lapse Slider Bundle
$ 2,650.00
Rhino Time Lapse Slider Bundle
Rhino SKU: SKU251 | Helix SKU: RHSKU251
Overview
This bundle has everything you need to start time-lapsing like a pro. The ultralight 42” Carbon rails make packing your gear in much easier and the included High Torque motor lets you get incredible vertical shots.
Make sure to add Rhino Focus to your bundle to keyframe your focus for even more dynamic time-lapses.
Features
- Ultra light carbon fiber rails are easy to pack
- High Torque motor for vertical slider shots
- Carry your gear completely set-up in the soft shell case
- In the box
Includes
- Rhino Slider Carbon 42”
- Rhino Arc II
- Rhino Motor - High Torque
- Slider Carrying Case 42”
Rhino Ultimate Slider Bundle
$ 3,650.00
Rhino Ultimate Slider Bundle
Rhino SKU: SKU250 | Helix SKU: RHSKU250
Overview
The Ultimate Slider Bundle equips you with a complete 4-axis slider setup that can capture anything from a dynamic interview with a 15lb cinema camera to a vertical day to night time-lapse with a mirrorless setup.
Our goal with this bundle was to put everything you’d ever need for a slider setup in a hard shell case that you can travel with and keep your gear organized for whatever shoot comes your way.
Features
- Complete 4-axis Rhino System
- Ships in an airline ready hardshell case to keep your gear safe and organized
- Comes with interchangeable rails to transform your slider based on the shoot
- Includes both motors to let you go fast or vertical
In the box
- Rhino Slider Pro 42”
- Rhino Arc II
- Rhino Focus
- Rhino Motor - High Torque
- Rhino Motor - High Speed
- Carbon 24” Rails
- Slider Hard Shell Case
Rhino Ultimate Slider Bundle with Soft Case
$ 3,550.00
Rhino Ultimate Slider Bundle with Soft Case
Rhino SKU: SKU255 | Helix SKU: RHSKU255
Overview
The Ultimate Slider Bundle equips you with a complete 4-axis slider setup that can capture anything from a dynamic interview with a 15lb cinema camera to a vertical day to night time-lapse with a mirrorless setup.
Includes
Rhino Slider Pro 42”
Rhino Arc II
Rhino Focus
Rhino Motor - High Torque
Rhino Motor - High Speed
Carbon 24” Rails
Slider Soft Shell Case
International charger
Mounting tool and bottle opener
